optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com issue a 08/2010 page 1 of 2 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. high reliability npn s ilicon phototransistor op602, op603, op604 (tx, txv) op604 (s) description: each device in the op600 high reliability series consists of a high-re liability npn silicon phot otransistor that is mounted in a glass-lensed miniature her metically sealed ?pill? package with an 18 half angle, as measured from the optical axis to the half-power point. after electrical testing by manufacturing, devices ar e processed to optek?s 100 percent screening program, which is patterned after mil-prf-19500. components in the high reliability op600 series are mechanically and spectrally matched to the op223 and op224 high reliability series of infrared emitting diodes. tx, txv and s devices are processed to optek?s milita ry screening program patterned after mil-prf-19500. please refer to application bulletins 208 and 210 for additional design information and reliability (degradation) and to application bulletin op202 for pill-type soldering to pcboard. features: ? miniature hermetically sealed package ? wide range of collector currents ? ideal for direct mounting to pcboard ? tx, txv & s devices are processed to mil-prf-19500 product photo here applications: ? non-contact reflecti ve object sensor ? assembly line automation ? machine automation ? machine safety ? end of travel sensor ? door sensor 1 2 pin # sensor 1 collector/cathode 2 emitter/anode part number light current i c(on) (ma) min / max v ce typ / max input power e e (mw/cm 2 ) viewing angle op602tx 2.00 / 5.00 5 / 50 20.0 35 op602txv op603tx 4.00 / 8.00 op603txv op604s 7.00 / na op604tx OP604TXV dimensions are in: inches [ millimeters] .123 [3.12] .111 [2.82]
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com issue a 08/2010 page 2 of 2 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. high reliability npn s ilicon phototransistor op602, op603, op604 (tx, txv) op604 (s) electrical characteristics (t a = 25c unless otherwise noted) input diode symbol parameter min typ max units test conditions i c (on) on-state collector current op602tx, op602txv op603tx, op603txv op604tx, OP604TXV, op604s 2 4 7 - 5 8 - ma v ce = 5.0 v, e e = 20 mw/cm 2(3)(4) i ceo collector dark current - - 25 na v ce = 10.0 v, e e = 0 - - 100 a v ce = 30.0 v, e e = 0 t a = 100 c v (br)ceo collector-emitter breakdown voltage 50 - - v i c = 100 a, e e = 0 v (br)eco emitter-collector breakdown voltage 7 - - v i c = 100 a, e e = 0 v ce(sat) collector-emitter saturati on voltage - - 0.4 v i c = 0.4 ma, e e = 20 mw/cm (2)(3)(4) t f rise time - - 20 v cc = 30 v, i c = 1.00 ma, rl = 100 ? (2)(3)(4) t r fall time - - 20 s absolute maximum ratings (t a =25c unless otherwise noted) storage temperature range -65 c to +150 c operating temperature range -55 c to +125 c collector-emitter voltage 50 v emitter-collector voltage 7.0 v soldering temperature (5 seconds with soldering iron) (1) 260 c power dissipation (2) 50 mw notes: (1) refer to application bulleting 202, which discusses proper techniques for soldering pill-type devices to pcboards. (2) no clean or low solids. rma flux is recommended. durati on can be extended to 10 seconds maximum when wave soldering. (3) derate linearly 0.5 mw/ c above 25 c. (4) junction temperature maintained at 25 c. (5) light source is an unfiltered tungsten lamp operating at ct=2870 k or equivalent source.
|
