13u... - series stainless steel isolated pressure sensor cells january 1998/073 aubinger weg 27, 82178 puchheim, germany phone 0049 - (0) 89 80 08 30, fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com features 0 ... 1000 to 0 ... 5000 psia low cost isolated rugged - stainless steel small size absolute pressure reliable semiconductor technology general description these stainless steel devices were developed for pressure applications that involve measurement of a hostile media in harsh environments. these sensors will accommodate any media that will not adversely attack 316 stainless steel. this series uses sensyms proven piezoresistive semiconductor sensor chip in an oil isolated housing. this design has proven to be highly reliable,stable and accurate. the13u series sensors feature either a weld ring collar or threaded mail port for pressure connection. applications oem industrial process control equivalent circuit electrical connections 13u... cell 13u... with port scale: 1cm 1 inch pressure sensor characteristics (all devices) environmental specifications temperature ranges: operating -10c to +85c storage -20c to +125c shock: 75g for 6 mscc insulation resistance: 100 m w at 50 vdc vibration: 17g rms maximum ratings supply voltage v s +7.5 v dc
13u... - series stainless steel isolated pressure sensor cells january 1998/073 aubinger weg 27, 82178 puchheim, germany phone 0049 - (0) 89 80 08 30, fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com pressure range specifications sensym part number 13u1000a(c,m) 13u2500a(c,m) 13u5000a(c,m) performance characteristics 1 min. -20 100 --- -2600 +690 --- --- --- --- --- --- max. +20 200 1.0 -2000 +810 --- --- --- --- --- --- typ. 0 150 0.2 -2300 +750 +4 0.1 0.1 4.0 4.0 0.1 unit mv mv %fs ppm/c ppm/c v/v/c %fs ms k w k w %fs characteristic zero pressure offset t a = 72f full-scale span 2 combined linearity and hysteresis 3 temperature coefficient of span temperature coefficient of resistance 4 temperature effect on offset 4 long term stability of offset and sensitivity 5 response time (10% to 90%) 6 input impedance t a = 25c output impedance repeatability 4 pressure range 0-1000 psia 0-2500 psia 0-5000 psia burst pressure 10,000 psia 10,000 psia 10,000 psia physical dimensions cell package mass: 11 g ported male package mass: 23 g dimensions in inches (mm)
13u... - series stainless steel isolated pressure sensor cells january 1998/073 aubinger weg 27, 82178 puchheim, germany phone 0049 - (0) 89 80 08 30, fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com specification notes: 1. reference conditions (unless otherwise noted): supply voltage, v s = 5 v dc ; t a = 25c; 2. span is the algebraic difference between the output voltage at full scale pressure and the output at zero pressure. span is ratiometric to the supply voltage 3. linearity is based on besst fit straight line. hysteresis is the maxium output difference at any point within the operating pressure range for increasing and decreasing pressure. 4. typical error of the offset voltage over the 0 to 50c reading. note, the typical temperature coefficients of span and resistance are based on best fit line between 0 to 50c. 5. long term stability over a one year period. 6. response time for 0 psi to full scale span pressure step change ordering information pressure range 0 to 1,000 psi 0 to 2,500 psi 0 to 5,000 psi cell 13u1000ac 13u2500ac 13u5000ac male port 13u1000am 13U2500AM 13u5000am sensym and sensortechnics reserve the right to make changes to any products herein. sensym and sensortechnics do not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
|
