how to order: website: www .marl.co.uk ? email: sales@marl.co.uk ? ? t elephone +44 (0)1229 582430 ? fax: +44 (0)1229 585155 the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. marl international reserve the right to alter without notice the specification or any conditions of supply for product s or service. l each product will operate over a wide volt age input range l black anodised aluminium housing l full internal potting to resist shock and vibration l sealed to ip67 l t rue bi-polar product for low volt age dc applications l other volt ages including dc options available in this range professional led indica t ors ?12.7mm mounting samples a v ailable ? marl interna tional l td 2007 : ds 066/07 issue 2 ordering information & t ypical t echnical characteristics (t a = 25c) mean t ime between failure = 100,000 hours. luminous intensity figures refer to the unmodified discrete led. fea tures specifica tions 699 series p ack quantity = 10 pieces page 1 of 2 ^ = product s must be derated according to the derating information. each derating graph refers to specific leds. refer to p age 3. intensities (lv) and colour shades of white (x,y co-ordinates) may vary between leds withina batch. 997f-c * t ypical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 p ar t number colour lens vol t age current luminous w a ve opera ting st orage ac/dc dc (ma) intensity length temp temp v opr lopr lv@20ma (mcd) l p (nm) t opr t stg 699-501-63 red colour dif fused 12-28 6-16 1 1000 643 -40 ~ +95^ -40 ~ +100 y es 699-521-63 y ellow colour dif fused 12-28 6-16 16000 591 -40 ~ +95^ -40 ~ +100 y es 699-532-63 green colour dif fused 12-28 6-16 23000 527 -40 ~ +95^ -40 ~ +100 y es 699-930-63 blue colour dif fused 12-28 6-16 7000 470 -40 ~ +95^ -40 ~ +100 y es 699-997-63 cool white colour dif fused 12-28 6-16 14000 *see below -40 ~ +95^ -40 ~ +100 y es 699-501-75 red colour dif fused 1 10v ac 6 1 1000 643 -40 ~ +95^ -40 ~ +100 y es 699-521-75 y ellow colour dif fused 1 10v ac 6 16000 591 -40 ~ +95^ -40 ~ +100 y es 699-532-75 green colour dif fused 1 10v ac 6 23000 527 -40 ~ +95^ -40 ~ +100 y es 699-930-75 blue colour dif fused 1 10v ac 6 7000 470 -40 ~ +95^ -40 ~ +100 y es 699-997-75 cool white colour dif fused 1 10v ac 6 14000 *see below -40 ~ +95^ -40 ~ +100 y es units v ac/vdc ma mcd nm c c high intensity
699 series mounting hole to be clean and burr free dimensions in mm (t ypical) not to scale below 50v ac/dc mounting hole how to order: website: www .marl.co.uk ? email: sales@marl.co.uk ? ? t elephone +44 (0)1229 582430 ? fax: +44 (0)1229 585155 the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. marl international reserve the right to alter without notice the specification or any conditions of supply for product s or service. samples a v ailable ? marl interna tional l td 2007 : ds 066/07 issue 2 page 2 of 2 bs en iso 9001:2000 approved manufacturer technical characteristics series maximum p anel nut minimum min/max. power cut out mounting mounting p anel dissip a tion t orque centres thickness 699 825 12.7 1.0 x,y=26.0 2.0-10.0 mw mm nm mm mm ma terials push-on connect ors body aluminium grade 6063 black anodised nut s t ainless s teel grade 303 panel seal v iton t ermination copper with silver flash finish lock w asher zinc plated steel fresnel lens polycarbonate encap sulation pc5430 header nylon6 a82 925-000-00 is brass tin plated.for use with 699 series lamp s. dimensions in mm (t ypical) not to scale above 50v ac/dc dera ting informa tion 501 & 521 532, 930 & 997
|
