www.protekdevices.com 1 pmmad series low capacitance steering diode arra ys applica tions ? high frequency data lines ? rs-232 & rs-422 interface networks ? ethernet: 10 base t ? computer i/o ports iec compa tibility (en61000-4) ? 61000-4-2 (esd): air - 15kv, contact - 8kv ? 61000-4-4 (eft): 40a - 5/50ns ? 61000-4-5 (surge): 24a, 8/20s - level 2(line-gnd) & level 3(line-line) fea tures ? 500 milliwatt continuous power dissipation ? esd protection > 40 kilovolts ? designed for i/o protection ? working voltage > 50 volts ? low capacitance 5pf per diode mechanical characteristics ? molded jedec so-14 package ? weight 0.15 grams (approximate) ? flammability rating ul 94v-0 ? 16mm tape and reel per eia standard 481 ? marking: logo, date code, part number & pin number 1 indicated by dot on top of package applica tions diagram so-14 05089.r5 10/02 + gnd or (-) i/o port 05089 . . . engineered solutions for the transient environment?
www.protekdevices.com 2 pmmad series 05089.r5 10/02 electrical characteristics per line @ 25c unless otherwise specified pa rt number repetitive peak pulse voltage @ 10a v rrm volts maximum reverse leakage current @40v i r a forward peak pulse current @8/20s i fm amps maximum capacitance (per diode) @ 4v, 1 mhz pf see note 1 0.1 40 1.2 5 device characteristics maximum forward voltage @100ma v f volts 50 0 5 10 15 20 25 30 t - time - s 0 20 40 60 80 100 120 i pp - peak pulse current - % of i pp test waveform parameters t f = 8s t d = 20s t f peak value i pp e -t t d = t i pp /2 figure 1 pulse wave form note 1: device types include: pmmad1103, pmmad1105, pmmad1106 and pmmad1109. electrical characteristics apply to all device types. maximum ratings @ 25c unless otherwise specified continuous power dissipation continuous forward current (single diode) repetitive peak forward current @ t p =5s, f=50khz operating temperature symbol value -55 c to 150 cc c -55 c to 150 c ma ma milliwatts units 700 400 500 t j i frm i f p pk t stg parameter storage temperature
www.protekdevices.com 3 pmmad series 05089.r5 10/02 pin configurations 2 3 5 7 8 9 11 12 14 pmmad1106 8 diode common anode array nc pin 1, 4, 6, 10 & 13 2 3 5 7 8 9 11 12 1 14 14 diode array nc pins 4, 6, 10 & 13 pmmad1103 7 854321 8 9 10 11 12 13 14 7 isolated diode array (independent) pmmad1109 2 3 5 7 8 9 11 12 14 8 diode common cathode array nc pins 1, 4, 6, 10 & 13 pmmad1105
www.protekdevices.com 4 pmmad series 05089.r5 10/02 copyright ? protek devices 2001 specifications: protek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except jedec). design changes: protek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer ? s and that in furnishing engineering and technical assistance, protek assumes no responsibility with respect to the selection or specifications of such products. package outline & dimensions notes: 1. - t - = seating plane and datum surface. 2. dimensions ? a ? and ? b ? are datum. 3. dimensions ? a ? and ? b ? do not include mold protrusions. 4. maximum mold protrusion is 0.015 ? (0.380 mm) per side. 5. dimensioning and tolerances per ansi y14.5m, 1982. 6. dimensions are exclusive of mold flash and metal burrs. package outline so-14 mounting pad -a- -b- p d- g -t- k c j r x 45 o 0 o - 10 o f 0.010 ? (0.25 mm) m b m 7 pl 0.010 ? (0.25 mm) s b m 8 pl t a s 14 8 7 1 0.050 ? typ 0.030 ? 0.005 ? 0.245 ? min 0.160 ? 0.005 ? 0.045 ? 0.005 ? a b c d f g j k p r 10.00 4.00 1.75 0.49 1.25 1.27 bsc 0.25 0.25 6.20 0.50 0.386 0.150 0.054 0.014 0.016 0.05 bsc 0.008 0.004 0.229 0.010 0.393 0.157 0.068 0.019 0.049 0.05 bsc 0.009 0.009 0.244 0.019 8.55 3.80 1.35 0.35 0.40 1.27 bsc 0.19 0.10 5.80 0.25 dim min max min max millimeters inches package dimensions 06006 rev 1 - 11/01 protek devices 2929 south fair lane, tempe, az 85282 tel: 602-431-8101 fax: 602-431-2288 e-mail: sales@protekdevices.com web site: www.protekdevices.com p ar t number suffixes used for t ape & reel/b ulk ordering: surface mount product is taped and reeled in accordance with eia-481. suffix-t7 = 7 inch reel - 1,000 pieces per reel i.e.: pmmad1103 - t7 suffix-t13 = 13 inch reel - 2,500 pieces per reel i.e: pmmad1103 - t13 no suffix = product shipped in tubes of 55 pcs per tube
|
