TLWWK1100B(t11) 2009-01-14 toshiba led lamp TLWWK1100B(t11) panel circuit indicator ? surface-mount devices ? 3.2 (l) 2.9 (w) 1.9 (h) mm ? led chip + phosphor ? luminous intensity : iv = 1500 mcd (typ.) @20ma ? color: warm white, color temperature 3500k(typ) ? topr / tstg = -40 to 100c ? applications: back-lighting for automotive use, general lighting, etc. ? standard embossed tape pack ing: t11 (2000 pcs / reel) 8-mm tape reel color and material absolute maximum ratings (ta = 25c) characteristics symbol rating unit forward current (note 1) i f 30 ma power dissipation p d 114 mw operating temperature t opr ? 40 to 100 c storage temperature t stg ? 40 to 100 c note: using continuously under heavy loads (e.g. the applic ation of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to dec rease in the reliability signif icantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and indi vidual reliability data (i.e. reliability test report and estimated failure rate, etc). note 1: forward current derating unit: mm jedec D jeita D toshiba 4-3v1 weight: 0.035 g (typ.) product name color material TLWWK1100B warm white ingan i f ? ta 0 0 20 40 60 80 100 120 5 10 15 20 25 30 35 ambient temperature ta (c) allowable forward current i f (ma) for part availability and ordering information please call toll free: 800.984.5337 website: www.marktechopto.com | email: info@marktechopto.com
TLWWK1100B(t11) 2009-01-14 2 electrical characteristics (ta = 25c) characteristics symbol test condition min. typ. max. unit forward voltage v f i f = 20 ma 2.6 3.2 3.8 v reverse voltage v r i r = 1 ma ? 0.75 ? v optical characteristics (ta = 25c) characteristics symbol test condition min. typ. max. unit c x i f = 20 ma (note 2) ? chromaticity c y i f = 20 ma (note 2) ? luminous intensity (note 3) i v i f = 20 ma 1000 1500 2500 mcd note 2: the product is tested at the following chromaticity coordinate group. test conditions: if=20ma, ta=25c note 3: iv rank classification test conditions: if=20ma, ta=25c luminous intensity i v product name min typ max i f TLWWK1100B(t11) 1000 1500 2500 wa1 1000 ? 1600 wa2 1250 ? 2000 xa1 1600 ? 2500 20 unit mcd ma the specification on the above table is used for iv classification of leds in toshiba facility. each reel includes the same rank leds. let the delivery ratio of eac h rank be unquestioned. 0.32 0.34 0.36 0.38 0.4 0.42 0.44 0.46 0.34 0.36 0.38 0.4 0.42 0.44 0.46 0.48 accurac y : +/-0.01 cx cy black body curve (cie1931) point cx cy 1 0.386 0.398 2 0.376 0.360 3 0.410 0.380 4 0.430 0.420
TLWWK1100B(t11) 2009-01-14 3 cautions ? the product is sensitive to electrosta tic and care must be fully taken when handling products. particularly in the case that an over-voltage shall be applied, the overfl owed energy may cause damage to or possibly result in destruction of the product. buyer shall take absolutely secure countermeasures agai nst electrostatic and surge when handling the product. ? the product is designed as a general display light sou rce usage, and it has applied the measurement standard that matched with the sensitivity of human's eyes. ther efore, it is not intended for usage of functional application (ex. light source for sensor, optical communi cation and etc) except general display light source.
TLWWK1100B(t11) 2009-01-14 4 TLWWK1100B 0 300 400 500 600 700 800 0.2 0.4 0.6 0.8 1.0 ? 20 0 20 40 80 100 60 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 forward voltage v f (v) i f ? v f forward current i f (ma) forward current i f (ma) i v /i v (20 ma) ? i f i v /i v (20 ma) 1 2.6 2.8 3.0 3.2 3.4 3.6 3.8 3 10 30 100 ta = 25c 0.01 1 300 30 100 3 10 0.03 0.1 0.3 1 3 5 50 500 ta = 25c ta = 25c radiation pattern 30 0 60 90 90 30 60 1.0 0.8 0.6 0.4 0.2 0 80 70 50 40 20 10 70 80 50 40 20 10 relative luminous intensity i v chromaticity cx, cy forward current i f (ma) cx, cy ? i f case temperature tc (c) relative i v ? tc relative luminous intensity wavelength (nm) wavelength characteristic (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) 0.34 0 10 20 30 40 50 0.36 0.38 0.40 0.42 0.44 c x ta = 25c c y
TLWWK1100B(t11) 2009-01-14 5 packaging this led device is packed in an aluminum envelope with a silica gel and a moisture indicator to avoid moisture absorption. the optical characteristics of the device may be affected by exposure to moisture in the air before soldering and the device should therefore be stored under the following conditions: 1. this moisture proof bag may be stored unopene d within 12 months at the following conditions. temperature: 5 c to 30 c humidity: 90% (max) 2. after opening the moisture proof bag, the device should be assembled within 168 hours in an environment of 5c to 30c/60% rh or below. 3. if upon opening, the moisture in dicator card shows humidity 30% or above (color of indication changes to pink) or the expiration date has passed, the de vice should be baked in taping with reel. after baking, use the baked device within 72 hours, but perform baking only once. baking conditions: 60 5c, for 24 to 48 hours. expiration date: 12 months from sealing date, which is imprinted on the label affixed. 4. repeated baking can cause the pee ling strength of the taping to change , then leads to trouble in mounting. 5. if the packing material of laminate would be broken , the hermeticity would deteriorate. therefore, do not throw or drop the packed devices. mounting method soldering ? reflow soldering (example) ? the product is evaluated using above re flow soldering conditions. no addition al test is performed exceed the condition (i.e. the condition more than (*)max values) as a evaluation. please perform reflow soldering under the above conditions. ? please perform the first reflow soldering with reference to the above temperature profile and within 168 h of opening the package. ? second reflow soldering in case of second reflow soldering should be performed within 168 h of the first reflow under the above conditions. storage conditions before the second reflow soldering: 30 c, 60% rh (max) ? make any necessary soldering corrections manually. (only once at each soldering point) soldering iron : 25 w temperature : 300 c or less time : within 3 s ? do not perform wave soldering. recommended soldering pattern 1.65 1.15 2.41 unit: mm 1.65 60 to 120 s 10 s max 240 c max 4 c/s max 140 to 160 c 4 c/s max time (s) package surface temperature ( c) temperature profile for pb soldering (example) time (s) package surface temperature ( c) temperature profile for pb-free soldering (example) 150 to 180 c 4 c/s max 5 s max 260 c max 4 c/s max 230 c 60 to 120 s (*) (*) (*) (*) (*) (*) (*) (*) max (*) max (*) max (*) 30 to 50s max (*) max (*)
TLWWK1100B(t11) 2009-01-14 6 cleaning when cleaning is required after soldering, toshiba recommends the following cleaning solvents. it is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the recommended conditions). in selecting the one for your actual usage, please perform sufficient review on washing condition, us ing condition and etc. asahi clean ak-225aes : (made by asahi glass) kao clean through 750h : (made by kao) pine alpha st-100s : (made by arakawa chemical) precautions when mounting (1) do not apply force to the plastic part of the led under high-temperature conditions. (2) to avoid damaging the led plastic, do not apply friction using a hard material. (3) when installing the pcb in a product, ensure that the device does no t come into contact with other cmponents. (4) silicone is used for the encapsulated material of this led. therefore the top surfac e of this product is soft. please do not pressure on encapsulated part of the led to avoid affecting the reliabi lity of the product. when using the automatic mounting devices, the pick and plac e nozzle that does not pre ssure on the silicone resin should be used. tape specifications 1. product number format the type of package used for shipment is denote d by a symbol suffix after the product number. the method of classification is as below. (this method, however does not apply to products whose electrical characteristics differ from standard toshiba specifications) (1) tape type: t11 (4-mm pitch) (2) example 2. handling precautions tape material protected against static electricity. however, static electricity may occur depending on quantity of charged static electricity and a device may attach to a tape, or a device may be unstable when peeling a tape cover. (a) since tape materials may accumulate an electrosta tic charge, use an ionizer to neutralize the ambient air. (b) for transport and temporary storage of devices, use containers (boxes and bags) and jigs that are made of anti-static materials or of materials which dissipate electrostatic charge. TLWWK1100B (t11) tape type toshiba product no.
TLWWK1100B(t11) 2009-01-14 7 3. tape dimensions symbol dimension tolerance symbol dimension tolerance d 1.5 +0.1/?0 p 2 2.0 0.05 e 1.75 0.1 w 8.0 0.3 p 0 4.0 0.1 p 4.0 0.1 t 0.3 0.05 a 0 2.9 0.1 f 3.5 0.05 b 0 3.7 0.1 d 1 1.5 0.1 k 0 2.3 0.1 a 0 p d 1 f e w polarity t k 0 b 0 d p 2 p 0
TLWWK1100B(t11) 2009-01-14 8 4. reel dimensions unit: mm 5. leader and trailer sections of tape note1: empty trailer section note2: empty leader section 9 +1/?0 180 +0 ?4 60 13 11.4 1.0 2 0.5 44 (note 1) leading part: 190 mm (min) 40 mm or more (note 2) 40 mm or more
TLWWK1100B(t11) 2009-01-14 9 6. packing form (1) packing quantity reel 2,000 pcs carton 10,000 pcs (2) packing form: each reel is sealed in an aluminum pack with silica gel. 7. label format (1) label contents shipped products are mentioned the following contents. p/n: toshiba type TLWWK1100B addc (t11) q?ty 2,000 pcs xxxxxx xxxxxxxx xxx xxxx (xxxxx) e6sag-0e0s6-07 use under 5-30degc/60%rh within 168h sealed xxxxxxxx [[g]]/rohs compatible diffused in japan *y380xxxxxxxxxxxxxxxxxx* assembled in japan contents about note section (each example means the contents are different for each lot.) information for customers use information for toshiba use 1) lot code example: 2707c2b 4) management code example: 715 32g 2) key code example: 12345678 5) packing quantity example: 2000 pcs 3) rank symbol example: l1wa1 6) product information e6sag-0e0s6-07 7) storage condition after opening use under 5-30 degc/60%rh within 168h (2) label location 1) 2) 4) 5) 3) 6) 7) tape feel direction label position label position ? reel ? carton ? the aluminum package in which the reel is supplied also has the label attached to center of one side.
TLWWK1100B(t11) 2009-01-14 10 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively ?toshiba?), reserve the right to make changes to the in formation in this document, and related hardware, software a nd systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product?s quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a ma lfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before creating and producing des igns and using, customers mus t also refer to and comply with (a) the latest versions of all re levant toshiba information, including without limitation, this d ocument, the specifications, the data sheets and applic ation notes for product and the precautions and conditions set forth in the ?tosh iba semiconductor reliability handbook? and (b) t he instructions for the application that product will be used with or for. custome rs are solely responsible for all aspects of t heir own product design or applications, incl uding but not limited to (a) determining th e appropriateness of the use of this product in such design or applications; (b) evaluating and det ermining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electroni cs appliances) or for specif ic applications as expre ssly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality a nd/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or se rious public impact (?unintended use?). unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic s ignaling equipment, equipment used to control combustions or explosions, safety dev ices, elevators and escalato rs, devices related to el ectric power, and equipment used in finance-related fields. do not use product for unintended use unless specifically permitted in thi s document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? a bsent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. expor t administration regulations. ex port and re-export of product or related software or technology are strictly prohibited exc ept in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result o f noncompliance with applicable laws and regulations.
|
