fuseholders fpg6 www.schurter.com/pg0 2 fuses shock-safe fuseholder, 5 x 20 mm, slot, press, iec 60335-1 250 vac 2.5 w / 10 a (vde)16 a (ul/csa) description - meets the new requirements of iec 60335-1 ed. 4.0 for appliances in unattended use (clause 30.2.3). this includes the enhanced require - ments of glow wire tests acc. to iec 60695-2-11 to -13. order numb - ers: xxxx.xxxx.15 - press-fit mount, secured with potting compound on the rear side standards - iec 60127-6 - ul 4248-1 / ul 512 - csa c22.2 no. 39 approvals - vde license number: 127216 - ul file number: e39328 applications - industrial electronic - household appliances - medical equipments references general product informatio n weblinks approval s , roh s , china-roh s , e-stor e , distributor-stock-chec k , accessorie s , product change notification (pcn ) technical data shocksafe category pc2 fuse-link 5 x 20 mm mounting panel mount, front-side mounting press-fit terminal solder or quick-connect 4.8 x 0.5 mm rated voltage 250 vac rated current 10 a (vde), 16 a (ul/csa) rated power acceptance iec 2.5 w / 10 a @ ta 23 c admissible power acceptance at hig - her ambient temperature see derating curves degree of protection ip 40 protection class suitable for appliances with protection class 1 or 2 acc. to iec 61140 admissible ambient air temp. -40 c to 85 c climatic category 40/085/21 acc. to iec 60068-1 material: socket thermoplastic, black, ul 94v-0 material: terminals tin-plated copper alloy unit weight (socket/cap) 5.3 g storage conditions 0 c to 60 c, max. 70% r.h. product marking , type, voltage, power acc./current rating, approvals soldering methods iron solderability 350 c / 2 sec acc. to iec 60068-2-20, test ta, method 2 resistance to soldering heat 350 c / 10 sec acc. to iec 60068-2-20, test tb, method 2 contact resistance < 5 m at 20 mv dielectric strength > 3 kv between l-n > 4 kv between l/n-pe (50 hz; 1 min) impulse withstand voltage > 2.5 kv between l-n > 6 kv between l/n-pe insulation resistance > 10 m between l-n > 100 m between l/n-pe (500 vdc; 1 min) overvoltage category i - ii acc. to iec 60664-1 pollution degree 1 - 3 acc. to iec 60664-1 resistance to vibration acc. to iec 60068-2-6, test fc panel thickness s max 2.5 mm
2 fuseholders fpg6 www.schurter.com/pg0 2 fuses abmessungen 41.5 mm ? 2.5 11 6 26.5 7 8 5 1 ? 1 . 1 1 ? 72 . 2 1 ? 2 6 . 7 41.5 8 . 1 +0.05 0 12.7 0 -0.05 mounting?holes derating curves for fuseholders admissible? power?acceptance?in? watt 1.5 1.0 0.5 0.0 2.5 2.0 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n ambient?air? temperature? ta ?c variants holder cap terminal degree of protection material remark order number l slot?knob solder? ip?40 thermoplastic - 3101.0060 l slot?knob solder? ip?40 spec. ? thermoplastic?1 approvals ?pending 3101.0060.15 l slot?knob quick-connect?4.8?x?0.5?mm ip?40 thermoplastic - 3101.0260 l slot?knob quick-connect?4.8?x?0.5?mm ip?40 spec. ? thermoplastic?1 approvals ?pending 3101.0260.15 l slot?knob solder? ip?67 thermoplastic - 3101.0160 l slot?knob solder? ip?67 spec. ? thermoplastic?1 approvals ?pending 3101.0160.15 spec. thermoplastic meet the new requirements of iec 60335-1 ed. 4.0 for appliances in unattended use (clause 30.2.3). this includes the enhanced requirements of glow wire tests acc. to iec 60695-2-11 to -13. white and grey colours available on request packaging unit bulk 186 x 91 x 91 mm (100 pcs.) the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
