original creation date: 03/26/96 last update date: 07/30/96 last major revision date: 03/26/96 mn54f190-x rev 1a0 military data sheet up/down decade counter with preset and ripple clock general description the f190 is a reversible bcd (8421) decade counter featuring synchronous counting and asynchronous presetting. the preset feature allows the f190 to be used in programmable deviders. the count enable input, the terminal count output and the ripple clock output make possible a variety of methods of implementing multistage counters. in the counting modes, state changes are initiated by the rising edge of the clock. ns part numbers 54f190dmqb 54F190FMQB 54f190lmqb industry part number 54f190 prime die m190 processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 2 static tests at +125 3 static tests at -55 4 dynamic tests at +25 5 dynamic tests at +125 6 dynamic tests at -55 7 functional tests at +25 8a functional tests at +125 8b functional tests at -55 9 switching tests at +25 10 switching tests at +125 11 switching tests at -55 1
military data sheet mn54f190-x rev 1a0 features - high-speed-125 mhz typical count frequency - synchronous counting - asynchronous parallel load - cascadable 2
military data sheet mn54f190-x rev 1a0 (absolute maximum ratings) (note 1) storage temperature -65 c to +150 c ambient temperature under bias -55 c to +125 c junction temperature under bias -55 c to +175 c vcc pin potential to ground pin -0.5v to +7.0v input voltage (note 2) -0.5v to +7.0v input current (note 2) -30 ma to +5.0ma voltage applied to output in high state (with vcc=0v) -0.5v to vcc standard output -0.5v to +5.5v tri-state output current applied to output in low state (max) twice the rated iol(ma) note 1: absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. functional operation under these conditions is not implied. note 2: either voltage limit or current limit is sufficient to protect inputs. recommended operating conditions free air ambient temperature 0 c to +70 c commercial -55 c to +125 c military supply voltage +4.5v to +5.5v military +4.5v to +5.5v commercial 3
mn54f190-x rev 1a0 military data sheet electrical characteristics dc parameter (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, -55c to 125c symbol parameter conditions notes pin- name min max unit sub- groups iih input high current vcc=5.5v, vm=2.7v, vinh=5.5v 1, 3 inputs 20 ua 1, 2, 3 ibvi input high current vcc=5.5v, vm=7.0v, vinh=5.5v 1, 3 inputs 100 ua 1, 2, 3 iil(1) input low current vcc=5.5v, vm=0.5v, vinl=0.0v, vinh=5.5v 1, 3 other -0.6 ma 1, 2, 3 vol output low voltage vcc=4.5v, vil=0.8v, vih=2.0v, iol=20ma 1, 3 outputs 0.5 v 1, 2, 3 voh output high voltage vcc=4.5v, vil=0.8v, vinh=5.5, vih=2.0v, vinl=0.0v, ioh=-1.0ma 1, 3 outputs 2.5 v 1, 2, 3 ios output short circuit current vcc=5.5v, vinh=5.5v, vm=0.0v, vinl=0.0v 1, 3 outputs -60 -150 ma 1, 2, 3 vcd input clamp diode voltage vcc=4.5v, im=-18ma, vinh=5.5v 1, 3 inputs -1.2 v 1, 2, 3 icc power supply current vcc=5.5v, vinl=0.0v 1, 3 vcc 55 ma 1, 2, 3 icex output high leakage current vcc=5.5v, vinl=0.0v 1, 3 outputs 250 ua 1, 2, 3 iil(2) input low current vcc=5.5v, vm=0.5v, vinh=5.5v 1, 3 ce -1.8 ma 1, 2, 3 ac parameter (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr=2.5ns, tf=2.5ns see ac figs tplh(1) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 cp to qn 3.0 7.5 ns 9 2, 4 cp to qn 3.0 9.5 ns 10, 11 tphl(1) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 cp to qn 5.0 11.0 ns 9 2, 4 cp to qn 5.0 13.5 ns 10, 11 tplh(2) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 cp to tc 6.0 13.0 ns 9 2, 4 cp to tc 6.0 16.5 ns 10, 11 tphl(2) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 cp to tc 5.0 11.0 ns 9 2, 4 cp to tc 5.0 13.5 ns 10, 11 4
mn54f190-x rev 1a0 military data sheet electrical characteristics ac parameter(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr=2.5ns, tf=2.5ns see ac figs symbol parameter conditions notes pin- name min max unit sub- groups tplh(3) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 cp to rc 3.0 7.5 ns 9 2, 4 cp to rc 3.0 9.5 ns 10, 11 tphl(3) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 cp to rc 3.0 7.0 ns 9 2, 4 cp to rc 3.0 9.0 ns 10, 11 tplh(4) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 pn to qn 3.0 7.0 ns 9 2, 4 pn to qn 3.0 9.0 ns 10, 11 tphl(4) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 pn to qn 6.0 13.0 ns 9 2, 4 pn to qn 6.0 16.0 ns 10, 11 tplh(5) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 ce to rc 3.0 7.0 ns 9 2, 4 ce to rc 3.0 9.0 ns 10, 11 tphl(5) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 ce to rc 3.0 7.0 ns 9 2, 4 ce to rc 3.0 9.0 ns 10, 11 tplh(6) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 pl to qn 5.0 11.0 ns 9 2, 4 pl to qn 5.0 13.0 ns 10, 11 tphl(6) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 pl to qn 5.5 12.0 ns 9 2, 4 pl to qn 5.5 14.5 ns 10, 11 tplh(7) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 u/d to rc 7.0 18.0 ns 9 2, 4 u/d to rc 7.0 22.0 ns 10, 11 tphl(7) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 u/d to rc 5.5 12.0 ns 9 2, 4 u/d to rc 5.5 14.0 ns 10, 11 5
mn54f190-x rev 1a0 military data sheet electrical characteristics ac parameter(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr=2.5ns, tf=2.5ns see ac figs symbol parameter conditions notes pin- name min max unit sub- groups tplh(8) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 u/d to tc 4.0 10.0 ns 9 2, 4 u/d to tc 4.0 13.5 ns 10, 11 tphl(8) propagation delay vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 2, 4 u/d to tc 4.0 10.0 ns 9 2, 4 u/d to tc 4.0 12.5 ns 10, 11 ts(h/l)(1) setup time high or low vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 5 u/d to cp 12.0 ns 9, 10, 11 th(h/l)(1) hold time high or low vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 5 u/d to cp 0 ns 9, 10, 11 ts(h/l)(2) setup time high or low vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 5 pn to pl 4.5 ns 9 5 pn to pl 6.0 ns 10, 11 th(h/l)(2) hold time high or low vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 5 pn to pl 2.0 ns 9, 10, 11 ts(l)(3) setup time low vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 5 ce to cp 10.0 ns 9 5 ce to cp 10.5 ns 10, 11 th(l)(3) hold time low vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 5 ce to cp 0 ns 9, 10, 11 tw(l) pulse width vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c tr=1.0ns, tf=1.0ns 5pl 6.0 ns 9 5pl 8.5 ns 10, 11 tw (l) pulse width vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c tr=1.0ns, tf=1.0ns 5 cp 5.0 ns 9 5 cp 7.0 ns 10, 11 trec recovery time vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c 5 pl to cp 6.0 ns 9 5 pl to cp 7.5 ns 10, 11 fmax(1) maximum clock frequency vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c tr=1.0ns, tf=1.0ns 5 q0, q1, q2, q3 100 mhz 9 5 q0, q1, q2, q3 75 mhz 10, 11 fmax(2) maximum clock frequency vcc=5.5v @25c, vcc=4.5 & 5.5v @ -55c/125c tr=1.0ns, tf=1.0ns 5rc 75 mhz 9 5rc 50 mhz 10, 11 6
mn54f190-x rev 1a0 military data sheet (continued) note 1: screen tested 100% on each device at +25c, +125c & -55c temperature, subgroups a1, 2, 3, 7 & 8. note 2: screen tested 100% on each device at +25c temperature only, subgroup a9. note 3: sample tested (method 5005, table 1) on each mfg. lot at +25c, +125c & -55c temperature, subgroups a1, 2, 3, 7 & 8. note 4: sample tested (method 5005, table 1) on each mfg. lot at +25c subgroup a9, and periodically at +125c & -55c temperature, subgroups 10 & 11. note 5: guaranteed but not tested. (design characterization data) 7
|
