hl01rrevd,10/97 page 0 short circuit protected built in standoffs industry standard pinout description the hl01r series uses advanced circuit design and packaging technology to realize superior reliability and performance. a 125khz push-pull oscillator is used in the input stage. beat-frequency oscillator problems are reduced when using the hl01r series with high frequency isolation amplifiers. reduced parts count and all surface mount construction add to the reliability of the hl01r series. the use of surface mount devices and magnetics eliminate hand soldering operations. this "hands-free" construction increases quality and reliability while keeping cost low. efficiency vs load 30% 0% 50% 75% 100% 0% 25% 50% 40% 20% 10% 60% load (ma) efficiency (%) t ypical performance curves specifications typical at t a = +25c, nominal input voltage, rated output current unless otherwise specified. features low cost non-conductive case internal input and output filtering product data sheet 1 w at t r egulated dc/dc c onverter hl01r absolute maximum ratings internal power dissipation.......................................................1.2w short circuit duration....................................................continuous lead temperature (soldering, 10 seconds max)................+300 c * * note: refer to reflow profile for smd models. ordering information device family hl indicates dc/dc converter model number where: xx = input voltage y = number or outputs (single "s", dual "d") zz = output voltage package option screening option dip package only hl01r xxyzz y/z /h internet: http://www.cdpowerelectronics.com power electronics division, united states 3400 e britannia drive, tucson, arizona 85706 phone: 800.547.2537 fax: 520.770.9369 power electronics division, europe c&d technologies (power electronics) ltd. 132 shannon industrial estate , shannon, co. clare, ireland tel: +353.61.474.133 fax:+353.61.474.141
hl01rrevd,10/97 page 2 parameter conditions min typ max units input voltage range 4.75 5 5.25 vdc 11.4 12 12.6 vdc 14.25 15 15.75 vdc 22.8 24 25.2 vdc reflected ripple current 30 100 map-p isolation rated voltage 500 vdc test voltage 60 hz, 10 seconds 500 vpk resistance 1g ? capacitance 25 pf leakage current v iso = 240vac, 60hz 2 10 arms output rated power 1w voltage setpoint accuracy 3 5 % temperature coefficent 0.01 0.02 %/ c ripple & noise bw = dc to 10mhz 30 100 mvp-p bw =10hz to 2mhz 1 10 mvrms line regulation high line to low line 0.1 0.3 % load regulation rated load to no load 0.3 0.5 % general switching frequency 125 khz package weight 10 g mttf per mil-hdbk-217, rev. f circuit stress method ground benign 675 khr temperature specification -25 +70 c operation -40 +85 c storage -40 +110 c nominal rated rated input current input output output voltage voltage current min load rated load efficiency model (vdc) (vdc) (ma) (ma) (ma)(%) hl01r05s05 5 5 200 50 400 58 hl01r05s12 5 12 83 50 400 52 hl01r05s15 5 15 67 50 400 52 hl01r12s05 12 5 200 40 160 58 hl01r12s12 12 12 83 40 160 52 hl01r12s15 12 15 67 40 160 52 hl01r15s05 15 5 200 30 130 58 hl01r15s12 15 12 83 30 130 52 hl01r15s15 15 15 67 30 130 52 hl01r24s05 24 5 200 20 80 58 hl01r24s12 24 12 83 20 80 52 hl01r24s15 24 15 67 20 80 52 hl01r05d05 5 5 100 50 425 45 hl01r05d12 5 12 41 50 400 53 hl01r05d15 5 15 33 50 400 53 hl01r12d05 12 5 100 40 185 45 hl01r12d12 12 12 41 40 160 53 hl01r12d15 12 15 33 40 160 53 hl01r15d05 15 5 100 30 145 45 hl01r15d12 15 12 41 30 130 53 hl01r15d15 15 15 33 30 130 53 hl01r24d05 24 5 100 20 90 45 electrical specifications specifications typical at t a = +25 c, nominal input voltage, rated output current unless otherwise specified. hl01r24d12 24 12 41 20 80 53 hl01r24d15 24 15 33 20 80 53 note: other input to output voltages may be available. please contact factory. specifications typical at t a = +25 c, nominal input voltage, rated output current unless otherwise specified. common specifications
hl01rrevd,10/97 page 2 recommended land pattern 2423 22 1514 13 12 11 10 3 2 1 0.730" (18.54) 1.150" (29.21) 0.100" (2.54) 0.080" (2.03) 0.040" (1.02) 50 100 150 200 250 temperature ( c) time (seconds) 235 c max 220 190 30 sec max (>220 c) 90 sec max (>190 c) recommended reflow profile 0.1000.010" (2.540.25) 0.0200.002" (0.510.05) 0.0150.005" (0.380.13) 0.3750.005" (9.520.13) 1.2850.010" (32.640.25) 2423 22 1514 13 12 11 10 3 2 1 0.0140.002" (0.360.05) .015.010" (.38.25) 0.5250.010" (13.340.25) 0.6950.015" (17.650.38) 0 - 15 0.125+0.030" -0.000" (3.18+0.76) ( -0.00) 0.600" (15.24) 0.1000.010" (2.540.25) 0.0200.002" (0.510.05) 0.0150.005" (0.380.13) 0.3750.005" (9.520.13) 1.2850.010" (32.640.25) 2423 22 1514 13 12 11 10 3 2 1 0.5250.010" (13.340.25) side views top views end views smd package dip package hl01rxxyzzy hl01rxxyzzz pin connections pin# singles duals 1 +vin +vin 2 nu -vout 3 nu common 10 -vout common 11 +vout +vout 12 -vin -vin 13 -vin -vin 14 +vout +vout 15 -vout common 22 nu common 23 nu -vout 24 +vin +vin nu = do not use. nc = no internal connection. duplicate pin functions are internally connected. all dimensions are in inches (millimeters). grid: 0.100 inches (2.54 millimeters) typically marked with: specific model ordered, date code, job code and logo. mechanical package/pinout "y" and "z"
hl01rrevd,10/97 page 4
|
