View RAFIX22FS_3124014.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

stock items are marked by bold printed order numbers. rafix 22 fs control components 2 - 163 2 rafix 22 fs general data rafix 22 fs control component range ?for a mounting hole diameter of 22.3 mm to iec 60947 ?contact blocks with gold or silver contacts ?depth behind panel only 9.2 mm ?water-jet proof ip65 ?2 collar shapes ?the contact blocks can be combined with other components on the same pcb. the specified data apply only if actuators/signal indicators are combined with contact blocks and lamp sockets within the same product range. content rafix 22 fs pushbutton 2 - 168 rafix 22 fs pushbutton, flush lens, round collar 2 - 169 rafix 22 fs pushbutton, protruding lens, round collar 2 - 170 rafix 22 fs pushbutton, protruding front ring, round collar 2 - 171 rafix 22 fs pushbutton, flush lens, square collar 2 - 172 rafix 22 fs pushbutton, protruding lens, square collar 2 - 173 rafix 22 fs pushbutton, protruding front ring 2 - 174 rafix 22 fs selector switch 2 - 176 rafix 22 fs selector switch, round collar 2 - 177 rafix 22 fs selector switch, square collar 2 - 178 rafix 22 fs keylock switch 2 - 180 rafix 22 fs keylock switch, round collar 2 - 181 rafix 22 fs keylock switch, square collar 2 - 182 rafix 22 fs emergency stop pushbutton 2 - 184 rafix 22 fs emergency stop pushbutton, non-illuminated, dupe-proof to en 418, non-blocking 2 - 185 rafix 22 fs emergency stop pushbutton, illuminated, dupe-proof to en 418, non-blocking 2 - 185 rafix 22 fs signal indicator 2 - 186 rafix 22 fs signal indicator , round collar 2 - 187 rafix 22 fs signal indicator, square collar 2 - 187 rafix 22 fs contact block with gold contacts 2 - 188 rafix 22 fs contact block with gold contacts 2 - 189 rafix 22 fs contact blocks with silver contacts 2 - 190 rafix 22 fs contact blocks with silver contacts 2 - 191 rafix 22 fs special accessories 2 - 192 blanking cap 2 - 192 ring nut 2 - 192 led base for signal indicators 2 - 193 plastic frontring with thermoflex protective cap 2 - 193
2 - 164 control components 2 rafix 22 fs the new rafix 22 fs control component range can be combined on a common printed circuit board together with short-travel keys and other components thanks to its extremely small mounting depth of 9.2 mm. the actuators and signal indicators are fastened to the front panel with a threaded ring in a 22.3 mm panel cut- out to iec 60947. the cast-on collar seal made of thermoflex and an integrated special membrane provide a water-jet proof degree of protection ip 65 to din. the contact blocks are soldered onto the pcb. illumination of the actuator is provided by a 3 mm led inserted into the base of the contact block and soldered to the pcb together with the contact block. the printed circuit board is fastened to the front panel with bolts, with the contact blocks sliding almost completely into the actuators. in this way an extremely low profile is achieved. additional advantages: individual wiring is made unnecessary and there is no more need for a cut-out in the pcb in the control component areas. 3 mm led lens transparent (illuminated) or opaque diffuser (for transparent lenses only) actuator with o-ring seal and special membrane. housing with integrated cast-on collar seal, front panel thickness 1 3 mm threaded ring contact block (optionally with led installed): 1nc, 1 no, 2 nc, 1 nc + 1 no, 2 no (colour-coded plungers: nc = red, no = green) gold contacts for 42 v max. (grey housing) or silver contacts for max. 250 v (black housing) locating pip for correct assembly printed circuit board screw-on front ring, made of plastic or metallized 9,2 mm rafix 22 fs
control components 2 - 165 rafix 22 fs cast-on collar seal special sealing combined with short-travel keys the actuators of the rafix 22fs system are suited for integration into low-profile data entry systems. the small mounting depth and the pcb solder terminals make it possible to combine the contact blocks with rafi short-travel keys racon 8 an 12, rf 15 and rf 19 as well as kn 19 on one and the same printed circuit board. illumination rafix 22 fs pushbuttons, selector switches and emergency stop buttons are also available as illuminated versions. for illumi- nation, we recommend to use the superbright 3 mm leds in the colour matching the lens. the leds are fitted into the contact block and soldered together with it. the signal indicators are als illuminated with superbright leds soldered directly onto the printed circuit board. in order to ensure full illumination, the led must be mounted on a base. bases are available as accessories. sealed against moisture and dirt o-ring seal the o-ring seals the space between the lens and the actuator. the cast-on collar seal cannot be lost or distorted during assembly. during assembly, the actuator is held in the mounting hole by the cast-on seal and can then be fixed by screwing from the rear. the special membrane seal safely prevents moisture, oil or dust from reaching the contact block. in contrast with seals sliding up and down along the shaft, the special membrane seal is arranged in a fixed position on the housing. in this way, rafix 22 fs guarentees switching raliability for the full service life (degree of protection ip65 to din). 2 rafix 22 fs
2 - 166 control components rafix 22 fs panel cut-out to iec 60947 all actuators are provided with a locating pip. with a grid spacing of 30 mm, the collars of the square actuators are arranged next to each other without a space in between. we recommend to use this grid spacing also for the round collar shapes (iec 60947). assembly indication the mismatch of actuators and contact blocks must be in a range of 0.2 mm. numerous design options for individual panels rafix 22 fs is available with many options. various lens and frontring combinations offer nearly unlimited design options for your panels. rafix 22 fs ist available both with a round or a square collar. the square version can be arranged one collar to the next just as an integral keypad. locating pip 1* led cathode no contacts (on version with 2 nc s, nc contacts) locating pip 2* led anode nc contacts (on version with 2 no s, no contacts) hole patterns pcb, view on component side * for better distinction the locating pip 2 has a bigger diameter than pip 1. in order to ease the mounting, the positions are additionally marked on the upper side of the housing. rafix 22 fs 2 min. 30.00 min. 30.00 actuator position
rafix 22 fs control components 2 - 167 2 rafix 22 fs installation drawing pcb top edge front panel top edge front panel spacer printed circuit board captive nut stud rafix 22 fs emergency stop rafix 22 fs pushbutton rf 19 short-travel key
stock items are marked by bold printed order numbers. rafix 22 fs 2 - 168 control components 2 rafix 22 fs rafix 22 fs pushbuttons panel cut-out acc. to iec 60947-5-1 silver/blue pict.: green/silver technical data general information form of lens see order block colour of lens see order block colout of front ring see order block form of collar see order block dimensions length of collar see order block width of collar see order block overall height see order block mounting depth 9.2 mm mounting hole 22.3 mm key grid 30 x 30 mm diameter of collar see order block mechanical design mounting ring nut contact function see order block illuminability yes mechanical characteristics operating travel 4 mm robustness min. 100 n other specifications ambient temp. operating min. -25 ? ambient temp. operating max. +70 ? storage temperature min. -40 ? storage temperature max. +80 ? operating life 1 million momentary/ 0,5 million latching degree of protection from front side ip65 resistance to constant environment iec 60068-2-3 and 2-30 resistance at variable environment iec 60068-2-14 and 2-33 description photo order no. page accessories rafix 22 fs pushbuttons rafix 22 fs universal contact block, 1 nc + 1 no, gold contacts 1.20.126.003/0000 2 - 189 rafix 22 fs universal contact block, silver contacts, 1 no 1.20.126.202/0000 2 - 191 fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 25 for additional accessories, refer to the chapter ?pecial accessories?
rafix 22 fs stock items are marked by bold printed order numbers. control components 2 - 169 2 rafix 22 fs rafix 22 fs pushbutton, flush lens, round collar pict.: green/silver grey panel cut-out acc. to iec 60947-5-1 colour of lens illuminability order no. momentary plastic front ring metallized front ring order no. latching plastic front ring metallized front ring yes transparent white 1.30.250.001/10xx 1.30.250.021/1000 1.30.250.011/10xx 1.30.250.031/1000 yes transparent red 1.30.250.001/13xx 1.30.250.021/1300 1.30.250.011/13xx 1.30.250.031/1300 yes transparent yellow 1.30.250.001/14xx 1.30.250.021/1400 1.30.250.011/14xx 1.30.250.031/1400 yes transparent green 1.30.250.001/15xx 1.30.250.021/1500 1.30.250.011/15xx 1.30.250.031/1500 yes transparent blue 1.30.250.001/16xx 1.30.250.021/1600 1.30.250.011/16xx 1.30.250.031/1600 no opaque black 1.30.250.101/01xx 1.30.250.121/0100 1.30.250.111/01xx 1.30.250.131/0100 no opaque white 1.30.250.101/02xx 1.30.250.121/0200 1.30.250.111/02xx 1.30.250.131/0200 no opaque red 1.30.250.101/03xx 1.30.250.121/0300 1.30.250.111/03xx 1.30.250.131/0300 no opaque yellow 1.30.250.101/04xx 1.30.250.121/0400 1.30.250.111/04xx 1.30.250.131/0400 no opaque green 1.30.250.101/05xx 1.30.250.121/0500 1.30.250.111/05xx 1.30.250.131/0500 no opaque blue 1.30.250.101/06xx 1.30.250.121/0600 1.30.250.111/06xx 1.30.250.131/0600 no opaque slate-grey 1.30.250.101/07xx 1.30.250.121/0700 1.30.250.111/07xx 1.30.250.131/0700 technical data see page 2 - 168 accessories: legend insert without legend: 5.70.800.000/2000 plastic frontring slate grey with protection cap: 5.05.004.986/0700 plastic frontring silver grey with protection cap: 5.05.004.986/0800 plastic frontring black with protection cap: 5.05.004.986/0100 plastic frontring red with protection cap: 5.05.004.986/0300 plastic frontring yellow with protection cap: 5.05.004.986/0400 plastic frontring green with protection cap: 5.05.004.986/0500 plastic frontring blue with protection cap: 5.05.004.986/0600 xx = front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08 order numbers 1.30.250.001/?8 and 1.30.250.011/?8 (with silver grey plastic front ring) are stock items .
stock items are marked by bold printed order numbers. rafix 22 fs 2 - 170 control components 2 rafix 22 fs rafix 22 fs pushbutton, protruding lens, round collar pict.: black/metallized panel cut-out acc. to iec 60947-5-1 colour of lens illuminability order no. momentary plastic front ring metallized front ring order no. latching plastic front ring metallized front ring yes transparent white 1.30.250.201/10xx 1.30.250.221/1000 1.30.250.211/10xx 1.30.250.231/1000 yes transparent red 1.30.250.201/13xx 1.30.250.221/1300 1.30.250.211/13xx 1.30.250.231/1300 yes transparent yellow 1.30.250.201/14xx 1.30.250.221/1400 1.30.250.211/14xx 1.30.250.231/1400 yes transparent green 1.30.250.201/15xx 1.30.250.221/1500 1.30.250.211/15xx 1.30.250.231/1500 yes transparent blue 1.30.250.201/16xx 1.30.250.221/1600 1.30.250.211/16xx 1.30.250.231/1600 no opaque black 1.30.250.301/01xx 1.30.250.321/0100 1.30.250.311/01xx 1.30.250.331/0100 no opaque white 1.30.250.301/02xx 1.30.250.321/0200 1.30.250.311/02xx 1.30.250.331/0200 no opaque red 1.30.250.301/03xx 1.30.250.321/0300 1.30.250.311/03xx 1.30.250.331/0300 no opaque yellow 1.30.250.301/04xx 1.30.250.321/0400 1.30.250.311/04xx 1.30.250.331/0400 no opaque green 1.30.250.301/05xx 1.30.250.321/0500 1.30.250.311/05xx 1.30.250.331/0500 no opaque blue 1.30.250.301/06xx 1.30.250.321/0600 1.30.250.311/06xx 1.30.250.331/0600 no opaque slate-grey 1.30.250.301/07xx 1.30.250.321/0700 1.30.250.311/07xx 1.30.250.331/0700 technical data see page 2 - 168 xx = front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08 order numbers 1.30.250.201/ 08 and 1.30.250.211/ 08 (with silver grey plastic front ring) are stock items . accessories: legend insert without legend: 5.70.802.000/2000
rafix 22 fs stock items are marked by bold printed order numbers. control components 2 - 171 2 rafix 22 fs rafix 22 fs pushbutton, protruding front ring, round collar pict.: white/slate grey panel cut-out acc. to iec 60947-5-1 colour of lens illuminability order no. momentary plastic front ring metallized front ring order no. latching plastic front ring metallized front ring yes transparent white 1.30.250.401/10xx 1.30.250.421/1000 yes transparent red 1.30.250.401/13xx 1.30.250.421/1300 yes transparent yellow 1.30.250.401/14xx 1.30.250.421/1400 yes transparent green 1.30.250.401/15xx 1.30.250.421/1500 yes transparent blue 1.30.250.401/16xx 1.30.250.421/1600 no opaque black 1.30.250.501/01xx 1.30.250.521/0100 no opaque white 1.30.250.501/02xx 1.30.250.521/0200 no opaque red 1.30.250.501/03xx 1.30.250.521/0300 no opaque yellow 1.30.250.501/04xx 1.30.250.521/0400 no opaque green 1.30.250.501/05xx 1.30.250.521/0500 no opaque blue 1.30.250.501/06xx 1.30.250.521/0600 no opaque slate-grey 1.30.250.501/07xx 1.30.250.521/0700 technical data see page 2 - 168 xx = front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08 accessories: legend insert without legend: 5.70.800.000/2000
stock items are marked by bold printed order numbers. rafix 22 fs 2 - 172 control components 2 rafix 22 fs rafix 22 fs pushbutton, flush lens, square collar pict.: blue/silver grey panel cut-out acc. to iec 60947-5-1 colour of lens illuminability order no. momentary plastic front ring metallized front ring order no. latching plastic front ring metallized front ring yes transparent white 1.30.250.051/10xx 1.30.250.071/1000 1.30.250.061/10xx 1.30.250.081/1000 yes transparent red 1.30.250.051/13xx 1.30.250.071/1300 1.30.250.061/13xx 1.30.250.081/1300 yes transparent yellow 1.30.250.051/14xx 1.30.250.071/1400 1.30.250.061/14xx 1.30.250.081/1400 yes transparent green 1.30.250.051/15xx 1.30.250.071/1500 1.30.250.061/15xx 1.30.250.081/1500 yes transparent blue 1.30.250.051/16xx 1.30.250.071/1600 1.30.250.061/16xx 1.30.250.081/1600 no opaque black 1.30.250.151/01xx 1.30.250.171/0100 1.30.250.161/01xx 1.30.250.181/0100 no opaque white 1.30.250.151/02xx 1.30.250.171/0200 1.30.250.161/02xx 1.30.250.181/0200 no opaque red 1.30.250.151/03xx 1.30.250.171/0300 1.30.250.161/03xx 1.30.250.181/0300 no opaque yellow 1.30.250.151/04xx 1.30.250.171/0400 1.30.250.161/04xx 1.30.250.181/0400 no opaque green 1.30.250.151/05xx 1.30.250.171/0500 1.30.250.161/05xx 1.30.250.181/0500 no opaque blue 1.30.250.151/06xx 1.30.250.171/0600 1.30.250.161/06xx 1.30.250.181/0600 no opaque slate-grey 1.30.250.151/07xx 1.30.250.171/0700 1.30.250.161/07xx 1.30.250.181/0700 technical data see page 2 - 168 xx = front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08 order numbers 1.30.250.051/ 08 and 1.30.250.061/ 08 (with silver grey plastic front ring) are stock items . accessories: legend insert without legend: 5.70.800.000/2000 plastic frontring black with protection cap: 5.05.004.986/0100 plastic frontring red with protection cap: 5.05.004.986/0300 plastic frontring yellow with protection cap: 5.05.004.986/0400 plastic frontring green with protection cap: 5.05.004.986/0500 plastic frontring blue with protection cap: 5.05.004.986/0600 plastic frontring slate grey with protection cap: 5.05.004.986/0700 plastic frontring silver grey with protection cap: 5.05.004.986/0800
rafix 22 fs stock items are marked by bold printed order numbers. control components 2 - 173 2 rafix 22 fs rafix 22 fs pushbutton, protruding lens, square collar pict.: white/blue panel cut-out acc. to iec 60947-5-1 colour of lens illuminability order no. momentary plastic front ring metallized front ring order no. latching plastic front ring metallized front ring yes transparent white 1.30.250.251/10xx 1.30.250.271/1000 1.30.250.261/10xx 1.30.250.281/1000 yes transparent red 1.30.250.251/13xx 1.30.250.271/1300 1.30.250.261/13xx 1.30.250.281/1300 yes transparent yellow 1.30.250.251/14xx 1.30.250.271/1400 1.30.250.261/14xx 1.30.250.281/1400 yes transparent green 1.30.250.251/15xx 1.30.250.271/1500 1.30.250.261/15xx 1.30.250.281/1500 yes transparent blue 1.30.250.251/16xx 1.30.250.271/1600 1.30.250.261/16xx 1.30.250.281/1600 no opaque black 1.30.250.351/01xx 1.30.250.371/0100 1.30.250.361/01xx 1.30.250.381/0100 no opaque white 1.30.250.351/02xx 1.30.250.371/0200 1.30.250.361/02xx 1.30.250.381/0200 no opaque red 1.30.250.351/03xx 1.30.250.371/0300 1.30.250.361/03xx 1.30.250.381/0300 no opaque yellow 1.30.250.351/04xx 1.30.250.371/0400 1.30.250.361/04xx 1.30.250.381/0400 no opaque green 1.30.250.351/05xx 1.30.250.371/0500 1.30.250.361/05xx 1.30.250.381/0500 no opaque blue 1.30.250.351/06xx 1.30.250.371/0600 1.30.250.361/06xx 1.30.250.381/0600 no opaque slate-grey 1.30.250.351/07xx 1.30.250.371/0700 1.30.250.361/07xx 1.30.250.381/0700 technical data see page 2 - 168 xx = front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08 order numbers 1.30.250.251/ 08 and 1.30.250.261/ 08 (with silver grey plastic front ring) are stock items . accessories: legend insert without legend: 5.70.802.000/2000
stock items are marked by bold printed order numbers. rafix 22 fs 2 - 174 control components 2 rafix 22 fs rafix 22 fs pushbutton, protruding front ring pict.: green/metallized panel cut-out acc. to iec 60947-5-1 colour of lens illuminability order no. momentary plastic front ring metallized front ring order no. latching plastic front ring metallized front ring yes transparent white 1.30.250.451/10xx 1.30.250.471/1000 yes transparent red 1.30.250.451/13xx 1.30.250.471/1300 yes transparent yellow 1.30.250.451/14xx 1.30.250.471/1400 yes transparent green 1.30.250.451/15xx 1.30.250.471/1500 yes transparent blue 1.30.250.451/16xx 1.30.250.471/1600 no opaque black 1.30.250.551/01xx 1.30.250.571/0100 no opaque white 1.30.250.551/02xx 1.30.250.571/0200 no opaque red 1.30.250.551/03xx 1.30.250.571/0300 no opaque yellow 1.30.250.551/04xx 1.30.250.571/0400 no opaque green 1.30.250.551/05xx 1.30.250.571/0500 no opaque blue 1.30.250.551/06xx 1.30.250.571/0600 no opaque slate-grey 1.30.250.551/07xx 1.30.250.571/0700 technical data see page 2 - 168 xx = front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08 accessories: legend insert without legend: 5.70.800.000/2000
stock items are marked by bold printed order numbers. 2 - 176 control components 2 rafix 22 fs rafix 22 fs rafix 22 fs selector switches einbau ? ffung nach iec 60947-5-1 non-illuminated pict.: front ring, silver grey, illuminated general data the illuminated selector switches are provided with translucent handle markings. these are opaque on the non- illuminated versions. technical data general information form of lens handle colour of lens translucent/opaque white colout of front ring see order block form of collar see order block dimensions length of collar see order block width of collar see order block overall height 22.24 mm mounting depth 9.2 mm mounting hole 22.3 mm key grid 30 x 30 mm diameter of collar see order block mechanical design mounting ring nut contact function see order block illuminability yes rotating angle see order block mechanical characteristics torque max. 1.5 nm other specifications operating life 0.5 million momentary / 0.5 million latching degree of protection from front side ip65 ambient temp. operating min. -25 c ambient temp. operating max. +70 c storage temperature min. -40 c storage temperature max. +80 c resistance to constant environment iec 600 68-2-3 and 2-30 resistance at variable environment iec 600 68-2-14 and 2-33 description photo order no. page accessories rafix 22 fs selector switches rafix 22 fs universal contact block, 1 no 1.20.126.002/0000 2 - 189 rafix 22 fs universal contact block, silver contacts, 1 nc 1.20.126.201/0000 2 - 191 for additional accessories, refer to the chapter special accessories .
stock items are marked by bold printed order numbers. control components 2 - 177 2 rafix 22 fs rafix 22 fs rafix 22 fs selector switch, round collar pict.: front ring, silver grey, illuminated einbau ? ffung nach iec 60947-5-1 illuminability drehwinkel order no. plastic front ring metal front ring contact function rotating angle yes latching 2 x 60 1 ? + 1s 1.30.252.301/22xx 1.30.252.302/2200 yes latching 2 x 90 1 ? + 1s 1.30.252.126/22xx 1.30.252.127/2200 no momentary 1 x 40 1 ? + 1s 1.30.252.501/02xx 1.30.252.502/0200 no momentary 2 x 40 1 ? + 1s 1.30.252.526/02xx 1.30.252.527/0200 no latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 1 ? + 1s 2 0 1.30.252.926/02xx 1.30.252.927/0200 no latching 1 x 90 , form l 1 ? + 1s 1.30.252.601/02xx 1.30.252.602/0200 no latching 1 x 90 , form v 1 ? + 1s 1.30.252.701/02xx 1.30.252.702/0200 no latching 2 x 60 1 ? + 1s 1.30.252.801/02xx 1.30.252.802/0200 no latching 2 x 90 1 ? + 1s 1.30.252.626/02xx 1.30.252.627/0200 yes momentary 1 x 40 1 ? + 1s 1.30.252.001/22xx 1.30.252.002/2200 yes momentary 2 x 40 1 ? + 1s 1.30.252.026/22xx 1.30.252.027/2200 yes latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 1 ? + 1s 2 0 1.30.252.426/22xx 1.30.252.427/2200 yes latching 1 x 90 , form l 1 ? + 1s 1.30.252.101/22xx 1.30.252.102/2200 yes latching 1 x 90 , form v 1 ? + 1s 1.30.252.201/22xx 1.30.252.202/2200 t echnical data see page 2 - 176 xx = front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08 other handle marking colours available on request. the following selector switches with silver grey plastic front ring are stock items: illuminated: 1.30.242.001/2208 , 1.30.242.026/2208 , 1.30.242.101/2208 , 1.30.242.201/2208 , 1.30.242.301/2208 non-illuminated: 1.30.242.501/0208 , 1.30.242.526/0208 , 1.30.242.601/0208 , 1.30.242.701/0208 , 1.30.242.801/0208
stock items are marked by bold printed order numbers. 2 - 178 control components 2 rafix 22 fs rafix 22 fs rafix 22 fs selector switch, square collar pict.: front ring, metallized, illuminated einbau ? ffung nach iec 60947-5-1 illuminability drehwinkel order no. plastic front ring metal front ring contact function rotating angle yes momentary 1 x 40 1 ? + 1s 1.30.252.051/22xx 1.30.252.052/2200 yes momentary 2 x 40 1 ? + 1s 1.30.252.076/22xx 1.30.252.077/2200 yes latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 1 ? + 1s 2 0 1.30.252.476/22xx 1.30.252.477/2200 yes latching 1 x 90 , form l 1 ? + 1s 1.30.252.151/22xx 1.30.252.152/2200 yes latching 1 x 90 , form v 1 ? + 1s 1.30.252.251/22xx 1.30.252.252/2200 yes latching 2 x 60 1 ? + 1s 1.30.252.351/22xx 1.30.252.352/2200 yes latching 2 x 90 1 ? + 1s 1.30.252.176/22xx 1.30.252.177/2200 no momentary 1 x 40 1 ? + 1s 1.30.252.551/02xx 1.30.252.552/0200 no momentary 2 x 40 1 ? + 1s 1.30.252.576/02xx 1.30.252.577/0200 no latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 1 ? + 1s 2 0 1.30.252.976/02xx 1.30.252.977/0200 no latching 1 x 90 , form l 1 ? + 1s 1.30.252.651/02xx 1.30.252.652/0200 no latching 1 x 90 , form v 1 ? + 1s 1.30.252.751/02xx 1.30.252.752/0200 no latching 2 x 60 1 ? + 1s 1.30.252.851/02xx 1.30.252.852/0200 no latching 2 x 90 1 ? + 1s 1.30.252.676/02xx 1.30.252.677/0200 t echnical data see page 2 - 176 xx = front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08 other handle marking colours available on request. the following selector switches with silver grey plastic front ring are stock items: illuminated: 1.30.252.051/2205 , 1.30.252.076/2208 , 1.30.252.151/2208 , 1.30.252.251/2208 , 1.30.252.351/2208 non-illuminated: 1.30.252.551/0208 , 1.30.252.576/0208 , 1.30.252.651/0208 , 1.30.252.751/0208 , 1.30.252.851/0208
stock items are marked by bold printed order numbers. 2 - 180 control components 2 rafix 22 fs rafix 22 fs rafix 22 fs keylock switch einbau ? ffung nach iec 60947-5-1 red pict.: blue technical data general information colout of front ring see order block form of collar see order block dimensions length of collar see order block width of collar see order block overall height 44.1 mm mounting depth 9.2 mm mounting hole 22.3 mm key grid 30 x 30 mm diameter of collar see order block mechanical design mounting ring nut contact function see order block lock micromec wafers 5 illuminability no lock type 001 number of locking positions 500 main key no symmetric key no rotating angle see order block key removal position see order block mechanical characteristics torque max. 1.3 nm other specifications operating life 0.3 mio. tastend/ 50000 rastend degree of protection from front side ip65 ambient temp. operating min. -25 c ambient temp. operating max. +70 c storage temperature min. -40 c storage temperature max. +80 c resistance to constant environment iec 600 68-2-3 and 2-30 resistance at variable environment iec 600 68-2-14 and 2-33 esd-strength lock / contact 15 kv esd-strength key/ front panel 15 kv description photo order no. page accessories rafix 22 fs keylock switch rafix 22 fs universal contact block, 1 nc 1.20.126.001/0000 2 - 189 rafix 22 fs universal contact block, silver contacts, 1 nc, 1 no 1.20.126.203/0000 2 - 191 fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 25 for additional accessories, refer to the chapter special accessories .
stock items are marked by bold printed order numbers. control components 2 - 181 2 rafix 22 fs rafix 22 fs rafix 22 fs keylock switch, round collar pict.: blue einbau ? ffung nach iec 60947-5-1 contact function drehwinkel order no. plastic front ring metal front ring rotating angle key removal position momentary 2 x 40 0 1 ? + 1s 1.30.255.101/xxxx 1.30.255.102/0000 momentary 1 x 40 0 1 ? + 1s 1.30.255.001/xxxx 1.30.255.002/0000 latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 0 1 ? + 1s 2 0 1.30.255.501/xxxx 1.30.255.502/0000 latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 0+2 1 ? + 1s 2 0 1.30.255.521/xxxx 1.30.255.522/0000 latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 2 1 ? + 1s 2 0 1.30.255.511/xxxx 1.30.255.512/0000 latching 2 x 90 0 1 ? + 1s 1.30.255.401/xxxx 1.30.255.402/0000 latching 2 x 90 0+1 1 ? + 1s 1.30.255.411/xxxx 1.30.255.412/0000 latching 2 x 90 0+1+2 1 ? + 1s 1.30.255.431/xxxx 1.30.255.432/0000 latching 2 x 90 0+2 1 ? + 1s 1.30.255.421/xxxx 1.30.255.422/0000 latching 1 x 90 , form v 0 1 ? + 1s 1.30.255.301/xxxx 1.30.255.302/0000 latching 1 x 90 , form v 0+1 1 ? + 1s 1.30.255.321/xxxx 1.30.255.322/0000 latching 1 x 90 , form v 1 1 ? + 1s 1.30.255.311/xxxx 1.30.255.312/0000 latching 1 x 90 , form l 0 1 ? + 1s 1.30.255.201/xxxx 1.30.255.202/0000 latching 1 x 90 , form l 0+1 1 ? + 1s 1.30.255.221/xxxx 1.30.255.222/0000 latching 1 x 90 , form l 1 1 ? + 1s 1.30.255.211/xxxx 1.30.255.212/0000 technical data see page 2 - 180 xxxx = front ring colour: black = 0100, red = 0300, yellow = 0400, green = 0500, blue = 0600, slate grey = 0700, silver grey = 0800 other lock variants available on request. included: 2 keys. the following keylock switches with silver grey plastic front ring are stock items: 1.30.255.001/0800 , 1.30.255.201/0800 , 1.30.255.221/0800 , 1.30.255.301/0800 , 1.30.255.321/0800 , 1.30.255.431/0800
stock items are marked by bold printed order numbers. 2 - 182 control components 2 rafix 22 fs rafix 22 fs rafix 22 fs keylock switch, square collar pict.: red einbau ? ffung nach iec 60947-5-1 contact function drehwinkel order no. plastic front ring metal front ring rotating angle key removal position momentary 2 x 40 0 1 ? + 1s 1.30.255.151/xxxx 1.30.255.152/0000 momentary 1 x 40 0 1 ? + 1s 1.30.255.051/xxxx 1.30.255.052/0000 latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 0 1 ? + 1s 2 0 1.30.255.551/xxxx 1.30.255.552/0000 latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 0+2 1 ? + 1s 2 0 1.30.255.571/xxxx 1.30.255.572/0000 latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 2 1 ? + 1s 2 0 1.30.255.561/xxxx 1.30.255.562/0000 latching 2 x 90 0 1 ? + 1s 1.30.255.451/xxxx 1.30.255.452/0000 latching 2 x 90 0+1 1 ? + 1s 1.30.255.461/xxxx 1.30.255.462/0000 latching 2 x 90 0+1+2 1 ? + 1s 1.30.255.481/xxxx 1.30.255.482/0000 latching 2 x 90 0+2 1 ? + 1s 1.30.255.471/xxxx 1.30.255.472/0000 latching 1 x 90 , form v 0 1 ? + 1s 1.30.255.351/xxxx 1.30.255.352/0000 latching 1 x 90 , form v 0+1 1 ? + 1s 1.30.255.371/xxxx 1.30.255.372/0000 latching 1 x 90 , form v 1 1 ? + 1s 1.30.255.361/xxxx 1.30.255.362/0000 latching 1 x 90 , form l 0 1 ? + 1s 1.30.255.251/xxxx 1.30.255.252/0000 latching 1 x 90 , form l 0+1 1 ? + 1s 1.30.255.271/xxxx 1.30.255.272/0000 latching 1 x 90 , form l 1 1 ? + 1s 1.30.255.261/xxxx 1.30.255.262/0000 technical data see page 2 - 180 xxxx = front ring colour: black = 0100, red = 0300, yellow = 0400, green = 0500, blue = 0600, slate grey = 0700, silver grey = 0800 other lock variants available on request. included: 2 keys. the following keylock switches with silver grey plastic front ring are stock items: 1.30.255.051/0800 , 1.30.255.251/0800 , 1.30.255.271/0800 , 1.30.255.351/0800 , 1.30.255.371/0800 , 1.30.255.481/0800
stock items are marked by bold printed order numbers. 2 - 184 control components 2 rafix 22 fs rafix 22 fs rafix 22 fs emergency stop pushbutton panel cut-out acc. to iec 60947-5-1 pict.: red general data the emergency stop pushbuttons comply with iec 60 204, iec 60 073, iec 60 947 and vde 0113 part 1. they are designed dupe-proof according to en 418 with a positive mechanical movement sequence. a certain operating force must be exerted at the action point in order to prevent inadvertent operation. the pushbutton latches when pressed and is reset by turning it in a clockwise direction. the special shape of the actuator prevents the emergency stop pushbutton from being blocked. this means that the emergency stop process - once initiated - cannot be impeded by any jamming objects. only use contact block 1.20.126.4xx. technical data general information form of lens conical mushroom form colour of lens red form of collar round dimensions mushroom diameter 30 mm overall height 33.2 mm mounting depth 9.2 mm mounting hole 22.3 mm key grid 30 x 30 mm diameter of collar 29.8 mm mechanical design mounting ring nut contact function latching illuminability see order block mechanical characteristics robustness min. 100 n other specifications ambient temp. operating min. -25 ? ambient temp. operating max. +70 ? approvals acc. to iec 60947-5-x, 60204, 60073, 601058 approvals, other ul 508, csa, curus (ul + csa) robustness acc. iec 600 68-2-3 and 2-30 operating life 50000 degree of protection from front side ip65 storage temperature min. -40 ? storage temperature max. +80 ? resistance to constant environment iec 600 68-2-3 and 2-30 resistance at variable environment iec 600 68-2-14 and 2-33 description photo order no. page accessories rafix 22 fs emergency stop pushbutton rafix 22 fs emergency stop contact block, 1 nc, gold contacts 1.20.126.401/0000 2 - 189 rafix 22 fs emergency stop contact block, 2 nc, gold contacts 1.20.126.404/0000 2 - 189
stock items are marked by bold printed order numbers. control components 2 - 185 2 rafix 22 fs rafix 22 fs description photo order no. page accessories rafix 22 fs emergency stop pushbutton rafix 22 fs emergency stop contact block, silver contacts, 1 nc 1.20.126.601/0000 2 - 191 fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 25 emergency stop label, yellow, round 60 mm, pvc adhesive, without legend 5.76.204.100/0400 2 - 161 emergency stop label, yellow , round 60 mm, pvc adhesive, with legend "not-aus" 5.76.204.101/0400 2 - 161 emergency stop label, yellow, round 60 mm, pvc adhesive, with legend "arret d'urgence" 5.76.204.102/0400 2 - 161 emergency stop label, yellow, round 60 mm, pvc adhesive, with legend "emergency-stop" 5.76.204.103/0400 2 - 161 emergency stop label, yellow 36 x 64 mm, pvc adhesive, without legend 5.76.205.011/0400 2 - 161 rafix 22 fs emergency stop pushbutton, non-illuminated, dupe-proof to en 418, non-blocking pict.: red panel cut-out acc. to iec 60947-5-1 illuminability approvals acc. to iec order no. complete no 60947-5-x, 60204, 60073, 601058 1.30.253.501/0300 technical data see page 2 - 184 rafix 22 fs emergency stop pushbutton, illuminated, dupe-proof to en 418, non-blocking pict.: red panel cut-out acc. to iec 60947-5-1 illuminability approvals acc. to iec order no. complete yes 60947-5-x, 60204, 60073, 601058 1.30.253.001/0300 technical data see page 2 - 184
stock items are marked by bold printed order numbers. 2 - 186 control components 2 rafix 22 fs rafix 22 fs rafix 22 fs signal indicator panel cut-out acc. to iec 60947-5-1 pict.: yellow technical data general information form of lens flat lens colour of lens see order block form of collar see order block dimensions length of collar see order block width of collar see order block overall height 9.7 mm mounting depth 9.2 mm mounting hole 22.3 mm key grid 30 x 30 mm diameter of collar see order block mechanical design mounting ring nut illuminability yes mechanical characteristics robustness min. 100 n other specifications degree of protection from front side ip65 ambient temp. operating min. -25 c ambient temp. operating max. +70 c storage temperature min. -40 c storage temperature max. +80 c resistance to constant environment iec 600 68-2-3 and 2-30 resistance at variable environment iec 600 68-2-14 and 2-33 description photo order no. page accessories rafix 22 fs signal indicator 3 mm led superbright red 1.90.690.269/0000 5 - 21 fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 25 led base for signal indicators 5.30.109.020/0756 2 - 193 legend insert blank 5.70.806.000/2000
stock items are marked by bold printed order numbers. control components 2 - 187 2 rafix 22 fs rafix 22 fs rafix 22 fs signal indicator, round collar pict.: yellow panel cut-out acc. to iec 60947-5-1 form of collar colour of lens order no. complete round transparent colourless 1.74.506.001/1000 round transparent red 1.74.506.001/1300 round transparent yellow 1.74.506.001/1400 round transparent green 1.74.506.001/1500 round transparent blue 1.74.506.001/1600 technical data see page 2 - 186 rafix 22 fs signal indicator, square collar pict.: red panel cut-out acc. to iec 60947-5-1 form of collar colour of lens order no. complete square transparent colourless 1.74.506.051/1000 square transparent red 1.74.506.051/1300 square transparent yellow 1.74.506.051/1400 square transparent green 1.74.506.051/1500 square transparent blue 1.74.506.051/1600 technical data see page 2 - 186 accessories: legend insert blank: 5.70.806.000/2000 accessories: legend insert blank: 5.70.806.000/2000
stock items are marked by bold printed order numbers. 2 - 188 control components 2 rafix 22 fs rafix 22 fs rafix 22 fs contact blocks with gold contacts emergency stop contact block, gold contacts, 2 nc pict.: universal contact block, 1 nc + 1 no, gold contacts general data illumination information: the contact blocks are suitable for use with illuminated actuators: insert the desired led into the integrated led base and subsequently solder it together with the contact block. we strongly recommend using the rafi superbright led since this ensures homogeneous illumination. technical data general information lamp led dimensions diameter 17.3 mm recommended key grid 30 mm mounting depth 9.2 mm mechanical design mounting soldering in pcb contact system bridgecontact self cleaning contact materials au contact arrangement see order block nc contact forcibly actuated acc. to iec 60947-5-1 yes t erminals solder terminal with locating lug robustness 100 n electrica characteristics acc. to iec 60947, ac-15 operating voltage ac/dc 42 v operating current ac/dc 100 ma rated power max. 250 mw other specifications operating life 1 million at 10 ma/ 24 v dc switching reliability at 24v/5ma dc 10 x 10 -6 approvals acc. to iec 60947-5-x, 60204, 60073, 601058 approvals, other ul 508, csa, curus (ul + csa) ambient temp. operating min. -25 c ambient temp. operating max. +70 c storage temperature min. -40 c storage temperature max. +80 colour of plunger see order block robustness acc. to iec 60947-5-5 (t ? v) shock resistance acc. to iec 60068-2-27 50 g at 11 ms, amplitude half sinusoidal resistance to vibrations acc. to iec 60068-2-6 5 g at 10 ... 500 hz resistance to constant environment iec 600 68-2-3 and 2-30 resistance at variable environment iec 600 68-2-14 and 2-33 salt spray iec 600 68-2-11 solderability / solder heat resistance iec 600 68-2-20 solder techniques wave solder bath / manual soldering type see order block colour of housing grey
stock items are marked by bold printed order numbers. control components 2 - 189 2 rafix 22 fs rafix 22 fs 3 mm led superbright yellow 1.90.690.267/0000 5 - 21 3 mm led superbright red 1.90.690.269/0000 5 - 21 3 mm led superbright blue 1.90.690.282/0000 5 - 21 3 mm led superbright green 1.90.690.285/0000 5 - 21 3 mm led superbright white 1.90.690.295/0000 5 - 21 rafix 22 fs contact block with gold contacts pict.: universal contact block, 1 nc + 1 no, gold contacts pict.: emergency stop contact block, 1 nc, gold contacts contact arrangement colour of housing order no. complete type colour of plunger 1 nc universal red grey 1.20.126.001/0000 1 no universal green grey 1.20.126.002/0000 1 nc + 1 no universal red and green grey 1.20.126.003/0000 2 nc universal red grey 1.20.126.004/0000 2 no universal green grey 1.20.126.005/0000 1 nc emergency stop red grey 1.20.126.401/0000 1 no emergency stop green grey 1.20.126.402/0000 1 nc + 1 no emergency stop yellow grey 1.20.126.403/0000 2 nc emergency stop red grey 1.20.126.404/0000 2 no emergency stop green grey 1.20.126.405/0000 technical data see page 2 - 188 caution: emergency stop contact blocks can only be used with emergency stop pushbuttons. universal contact blocks are not suita ble for emergency stop pushbuttons. description photo order no. page accessories rafix 22 fs contact blocks with gold contacts for additional accessories, refer to the chapter rafix 22 fs special accessories .
stock items are marked by bold printed order numbers. 2 - 190 control components 2 rafix 22 fs rafix 22 fs rafix 22 fs contact blocks with silver contacts silver contacts, universal type, 1 nc pict.: silver contacts, 1 nc + 1 no general data illumination information: the contact blocks are suitable for use with illuminated actuators: insert the desired led into the integrated led base and subsequently solder it together with the contact block. we strongly recommend using the rafi superbright led since this ensures homogeneous illumination. technical data general information lamp led dimensions diameter 17.3 mm recommended key grid 30 mm mounting depth 9.2 mm mechanical design mounting soldering in pcb contact system bridgecontact self cleaning contact materials ag contact arrangement see order block nc contact forcibly actuated acc. to iec 60947-5-1 yes t erminals solder terminal with locating lug robustness 100 n electrica characteristics acc. to iec 60947, ac-15 rated insulation voltage ac/dc 250 v rated peak voltage 2500 v rated operating current i e , ac15 b300 3 a/120 v; 1.5 a/240 v; ithe: 5 a rated operating current i e , dc13 q300 550 ma/120 v ; 270 ma/ 240 v ; ithe: 2.5 a other specifications operating life at 250v / 1a 1000000 operating life at 250v / 2a 100000 operating life at 250v / 4a 70000 switching reliability at 24v/5ma dc 10 x 10 -6 ambient temp. operating min. -25 c ambient temp. operating max. +70 c storage temperature min. -40 c storage temperature max. +80 c colour of plunger see order block approvals acc. to iec 60947-5-x, 60204, 60073, 601058 approvals, other ul 508, csa, curus (ul + csa) robustness acc. to iec 60947-5-5 (t ? v) shock resistance acc. to iec 60068-2-27 50 g at 11 ms, amplitude half sinusoidal resistance to vibrations acc. to iec 60068-2-6 5 g at 10 ... 500 hz resistance to constant environment iec 600 68-2-3 and 2-30 resistance at variable environment iec 600 68-2-14 and 2-33 salt spray iec 600 68-2-11 solderability / solder heat resistance iec 600 68-2-20 solder techniques wave solder bath / manual soldering flame class acc. to ul 94 v 0 hot wire ignition acc. to iec 60695-2-1 yes type see order block colour of housing black
stock items are marked by bold printed order numbers. control components 2 - 191 2 rafix 22 fs rafix 22 fs description photo order no. page accessories rafix 22 fs contact blocks with silver contacts 3 mm led superbright yellow 1.90.690.267/0000 5 - 21 3 mm led superbright red 1.90.690.269/0000 5 - 21 3 mm led superbright blue 1.90.690.282/0000 5 - 21 3 mm led superbright green 1.90.690.285/0000 5 - 21 3 mm led superbright white 1.90.690.295/0000 5 - 21 rafix 22 fs contact blocks with silver contacts pict.: universal, silver contacts, universal type, 1 no pict.: universal, silver contacts, 1 nc + 1 no contact arrangement colour of housing order no. complete type colour of plunger 1 nc universal red black 1.20.126.201/0000 1 no universal green black 1.20.126.202/0000 1 nc + 1 no universal red and green black 1.20.126.203/0000 2 nc universal red black 1.20.126.204/0000 2 no universal green black 1.20.126.205/0000 1 nc emergency stop red black 1.20.126.601/0000 1 no emergency stop green black 1.20.126.602/0000 1 nc + 1 no emergency stop yellow black 1.20.126.603/0000 2 nc emergency stop red black 1.20.126.604/0000 2 no emergency stop green black 1.20.126.605/0000 technical data see page 2 - 190 caution: emergency stop contact blocks can only be used with emergency stop pushbuttons. universal contact blocks are not suita ble for emergency stop pushbuttons. for additional accessories, refer to the chapter rafix 22 fs special accessories .
stock items are marked by bold printed order numbers. 2 - 192 control components 2 rafix 22 fs ring nut pict.: black order no. short text feature 1 feature 2 ring nut (spare part) 5.24.279.014/0100 rafix 22 fs rafix 22 fs special accessories blanking cap order no. short text feature 1 feature 2 blanking cap ip65, ring nut, square 5.05.800.068/0000 blanking cap ip65, ring nut, round 5.05.800.067/0000 description photo order no. page accessories rafix 22 qr special accessories fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 25
led base for signal indicators order no. short text frontring feature 2 plastic frontring black with protection cap black 5.05.004.986/0100 plastic frontring red with protection cap red 5.05.004.986/0300 plastic frontring yellow with protection cap yellow 5.05.004.986/0400 plastic frontring green with protection cap green 5.05.004.986/0500 plastic frontring blue with protection cap blue 5.05.004.986/0600 plastic frontring slate grey with protection cap slate grey 5.05.004.986/0700 plastic frontring silver grey with protection cap silver grey 5.05.004.986/0800 stock items are marked by bold printed order numbers. control components 2 - 193 2 rafix 22 fs rafix 22 fs led base for signal indicators order no. short text feature 1 feature 2 led base for signal indicators 5.30.109.020/0756 plastic frontring with protective cap

▲Up To Search▲

Price & Availability of RAFIX22FS

	To Download RAFIX22FS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .