View SN54ALS245AJ_3144856.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sn54als245a, sn54as245, sn74als245a, sn74as245 octal bus transceivers with 3-state outputs sdas272a ? november 1994 ? revised january 2003 1 post office box 655303 ? dallas, texas 75265 4.5-v to 5.5-v v cc operation max t pd of 5.5 ns at 5 v 3-state outputs drive bus lines directly pnp inputs reduce dc loading 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 dir a1 a2 a3 a4 a5 a6 a7 a8 gnd v cc oe b1 b2 b3 b4 b5 b6 b7 b8 sn54als245a ...j or w p ackage sn54as245 ...j p ackage sn74als245a . . . db, dw, n, or ns package sn74as245 ...dw, n, or ns p ackage (top view) 3212019 910111213 4 5 6 7 8 18 17 16 15 14 b1 b2 b3 b4 b5 a3 a4 a5 a6 a7 a2 a1 dir b7 b6 oe a8 gnd b8 v cc sn54als245a, sn54as245 . . . fk package (top view) description/ordering information ordering information t a package ? orderable part number top-side marking sn74als245a-1n sn74als245a-1n pdip ? n tube sn74als245an sn74als245an sn74as245n sn74as245n tube sn74als245adw als245a tape and reel sn74als245adwr als245a soic dw tube sn74als245a-1dw als245a 1 0 c to 70 c soic ? dw tape and reel sn74als245a-1dwr als245a - 1 tube sn74as245dw as245 tape and reel sn74as245dwr as245 tape and reel sn74als245ansr als245a sop ? ns tape and reel sn74als245a-1nsr als245a-1 tape and reel sn74as245nsr 74as245 ssop ? db tape and reel sn74als245adbr g245a cdip j tube snj54als245aj snj54als245aj cdip ? j tube snj54as245j snj54as245j ?55 c to 125 c cfp ? w tube snj54als245aw snj54als245aw lccc fk tube snj54als245afk snj54als245afk lccc ? fk tube snj54as245fk snj54as245fk production data information is current as of publication date. products conform to specifications per the terms of texas instruments standard warranty. production processing does not necessarily include testing of all parameters. on products compliant to mil-prf-38535, all parameters are tested unless otherwise noted. on all other products, production processing does not necessarily include testing of all parameters. copyright ? 2003, texas instruments incorporated please be aware that an important notice concerning availability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
sn54als245a, sn54as245, sn74als245a, sn74as245 octal bus transceivers with 3-state outputs sdas272a ? november 1994 ? revised january 2003 2 post office box 655303 ? dallas, texas 75265 description/ordering information(continued) these octal bus transceivers are designed for asynchronous two-way communication between data buses. the control-function implementation minimizes external timing requirements. the devices allow data transmission from the a bus to the b bus or from the b bus to the a bus, depending upon the logic level at the direction-control (dir) input. the output-enable (oe ) input can be used to disable the device so that the buses are effectively isolated. the -1 version of the sn74als245a is identical to the standard version, except that the recommended maximum i ol is increased to 48 ma. there is no -1 version of the sn54als245a. function table inputs operation oe dir operation l l b data to a bus l h a data to b bus h x isolation logic diagram, each gate (positive logic) dir oe a1 b1 1 2 18 19 to seven other channels absolute maximum ratings over operating free-air temperature range (sn54als245a, sn74als245a) (unless otherwise noted) ? supply voltage, v cc 7 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . input voltage, v i : all inputs 7 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i/o ports 5.5 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . package thermal impedance, ja (see note 1): db package 70 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . dw package 58 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n package 69 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ns package 60 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . storage temperature range ? 65 c to 150 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ? stresses beyond those listed under ? absolute maximum ratings ? may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under ? recommended operating conditions ? is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. note 1: the package thermal impedance is calculated in accordance with jesd 51-7.
sn54als245a, sn54as245, sn74als245a, sn74as245 octal bus transceivers with 3-state outputs sdas272a ? november 1994 ? revised january 2003 3 post office box 655303 ? dallas, texas 75265 recommended operating conditions (see note 2) sn54als245a sn74als245a unit min nom max min nom max unit v cc supply voltage 4.5 5 5.5 4.5 5 5.5 v v ih high-level input voltage 2 2 v v il low-level input voltage 0.7 0.8 v i oh high-level output current ? 12 ? 15 ma i ol low level out p ut current 12 24 ma i ol low - level output current 48 ? ma t a operating free-air temperature ? 55 125 0 70 c ? applies only to the -1 version and only if v cc is between 4.75 v and 5.25 v note 2: all unused inputs of the device must be held at v cc or gnd to ensure proper device operation. refer to the ti application report, implications of slow or floating cmos inputs , literature number scba004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) parameter test conditions sn54als245a sn74als245a unit parameter test conditions min typ ? max min typ ? max unit v ik v cc = 4.5 v, i i = ? 18 ma ? 1.5 ? 1.5 v v cc = 4.5 v to 5.5 v, i oh = ? 0.4 ma v cc ? 2 v cc ? 2 v oh i oh = ? 3 ma 2.4 3.2 2.4 3.2 v v oh v cc = 4.5 v i oh = ? 12 ma 2 v i oh = ? 15 ma 2 i ol = 12 ma 0.25 0.4 0.25 0.4 v ol v cc = 4.5 v i ol = 24 ma 0.35 0.5 v i ol = 48 ma ? 0.35 0.5 i i control inputs v cc =55v v i = 7 v 0.1 0.1 ma i i a or b ports v cc = 5 . 5 v v i = 5.5 v 0.1 0.1 ma i ih control inputs v cc =55v v i =27v 20 20 a i ih a or b ports v cc = 5 . 5 v , v i = 2 . 7 v 20 20 a i il control inputs v cc =55v v i =04v ? 0.1 ? 0.1 ma i il a or b ports v cc = 5 . 5 v , v i = 0 . 4 v ? 0.1 ? 0.1 ma i o ? v cc = 5.5 v, v o = 2.25 v ? 20 ? 112 ? 30 ? 112 ma outputs high 30 48 30 45 i cc v cc = 5.5 v outputs low 36 60 36 55 ma outputs disabled 38 63 38 58 ? applies only to the -1 version and only if v cc is between 4.75 v and 5.25 v ? all typical values are v cc = 5 v, t a = 25 c. for i/o ports, the parameters i ih and i il include the off-state output current. ? the output conditions have been chosen to produce a current that closely approximates one-half of the true short-circuit output current, i os .
sn54als245a, sn54as245, sn74als245a, sn74as245 octal bus transceivers with 3-state outputs sdas272a ? november 1994 ? revised january 2003 4 post office box 655303 ? dallas, texas 75265 switching characteristics (see figure 1) parameter from (input) to (output) v cc = 4.5 v to 5.5 v, c l = 50 pf, r1 = 500 ?, r2 = 500 ? , t a = min to max ? unit sn54als245a sn74als245a min max min max t plh aorb bora 1 19 3 10 ns t phl a or b b or a 1 14 3 10 ns t pzh oe aorb 2 30 5 20 ns t pzl oe a or b 2 29 5 20 ns t phz oe aorb 2 14 2 10 ns t plz oe a or b 2 30 4 15 ns ? for conditions shown as min or max, use the appropriate value specified under recommended operating conditions. absolute maximum ratings over operating free-air temperature range (sn54as245, sn74as245) (unless otherwise noted) ? supply voltage, v cc 7 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . input voltage, v i : all inputs 7 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i/o ports 5.5 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . package thermal impedance, ja (see note 1): dw package 58 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n package 69 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ns package 60 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . storage temperature range ? 65 c to 150 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ? stresses beyond those listed under ? absolute maximum ratings ? may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under ? recommended operating conditions ? is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. note 1: the package thermal impedance is calculated in accordance with jesd 51-7. recommended operating conditions (see note 2) sn54as245 sn74as245 unit min nom max min nom max unit v cc supply voltage 4.5 5 5.5 4.5 5 5.5 v v ih high-level input voltage 2 2 v v il low-level input voltage 0.8 0.8 v i oh high-level output current ? 12 ? 15 ma i ol low-level output current 48 64 ma t a operating free-air temperature ? 55 125 0 70 c note 2: all unused inputs of the device must be held at v cc or gnd to ensure proper device operation. refer to the ti application report, implications of slow or floating cmos inputs , literature number scba004.
sn54als245a, sn54as245, sn74als245a, sn74as245 octal bus transceivers with 3-state outputs sdas272a ? november 1994 ? revised january 2003 5 post office box 655303 ? dallas, texas 75265 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) parameter test conditions sn54as245 sn74as245 unit parameter test conditions min typ ? max min typ ? max unit v ik v cc = 4.5 v, i i = ? 18 ma ? 1.2 ? 1.2 v v cc = 4.5 v to 5.5 v, i oh = ? 2 ma v cc ? 2 v cc ? 2 v oh i oh = ? 3 ma 2.4 3.2 2.4 3.2 v v oh v cc = 4.5 v i oh = ? 12 ma 2 v i oh = ? 15 ma 2 v ol v cc =45v i ol = 48 ma 0.3 0.55 v v ol v cc = 4 . 5 v i ol = 64 ma 0.35 0.55 v i i control inputs v cc =55v v i = 7 v 0.1 0.1 ma i i a or b ports v cc = 5 . 5 v v i = 5.5 v 0.1 0.1 ma i ih control inputs v cc =55v v i =27v 50 20 a i ih a or b ports ? v cc = 5 . 5 v , v i = 2 . 7 v 70 70 a i il control inputs v cc =55v v i =04v ? 0.5 ? 0.5 ma i il a or b ports ? v cc = 5 . 5 v , v i = 0 . 4 v ? 0.75 ? 0.75 ma i o v cc = 5.5 v, v o = 2.25 v ? 50 ? 150 ? 50 ? 150 ma outputs high 62 97 62 97 i cc v cc = 5.5 v outputs low 95 143 95 143 ma outputs disabled 79 123 79 123 ? all typical values are v cc = 5 v, t a = 25 c. ? for i/o ports, the parameters i ih and i il include the off-state output current. the output conditions have been chosen to produce a current that closely approximates one-half of the true short-circuit output current, i os . switching characteristics (see figure 1) parameter from (input) to (output) v cc = 4.5 v to 5.5 v, c l = 50 pf, r1 = 500 ? , r2 = 500 ?, t a = min to max ? unit sn54as245 sn74as245 min max min max t plh aorb bora 2 9.5 2 7.5 ns t phl a or b b or a 2 9 2 7 ns t pzh oe aorb 2 11 2 9 ns t pzl oe a or b 2 10.5 2 8.5 ns t phz oe aorb 2 7.5 2 5.5 ns t plz oe a or b 2 12 2 9.5 ns ? for conditions shown as min or max, use the appropriate value specified under recommended operating conditions.
sn54als245a, sn54as245, sn74als245a, sn74as245 octal bus transceivers with 3-state outputs sdas272a ? november 1994 ? revised january 2003 6 post office box 655303 ? dallas, texas 75265 parameter measurement information series 54als/74als and 54as/74as devices t phz t plz t phl t plh 0.3 v t pzl t pzh t plh t phl load circuit for 3-state outputs from output under test test point r1 s1 c l (see note a) 7 v 1.3 v 1.3 v 1.3 v 3.5 v 3.5 v 0.3 v 0.3 v t h t su voltage waveforms setup and hold times timing input data input 1.3 v 1.3 v 3.5 v 3.5 v 0.3 v 0.3 v high-level pulse low-level pulse t w voltage waveforms pulse durations input out-of-phase output (see note c) 1.3 v 1.3 v 1.3 v 1.3 v 1.3 v 1.3 v 1.3 v 1.3 v 1.3 v 1.3 v 3.5 v 3.5 v 0.3 v 0.3 v v ol v oh v oh v ol output control (low-level enabling) waveform 1 s1 closed (see note b) waveform 2 s1 open (see note b) 0 v v oh v ol 3.5 v in-phase output 0.3 v 1.3 v 1.3 v voltage waveforms propagation delay times voltage waveforms enable and disable times, 3-state outputs r2 v cc r l test point from output under test c l (see note a) load circuit for open-collector outputs load circuit for bi-state totem-pole outputs from output under test test point c l (see note a) r l r l = r1 = r2 notes: a. c l includes probe and jig capacitance. b. waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. c. when measuring propagation delay items of 3-state outputs, switch s1 is open. d. all input pulses have the following characteristics: prr 1 mhz, t r = t f = 2 ns, duty cycle = 50%. e. the outputs are measured one at a time with one transition per measurement. figure 1. load circuits and voltage waveforms
packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) 84030012a active lccc fk 20 1 tbd post-plate n / a for pkg type 8403001ra active cdip j 20 1 tbd a42 snpb n / a for pkg type 8403001sa active cfp w 20 1 tbd a42 n / a for pkg type SN54ALS245AJ active cdip j 20 1 tbd a42 snpb n / a for pkg type sn54as245j active cdip j 20 1 tbd a42 snpb n / a for pkg type sn74als245a-1dw active soic dw 20 25 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245a-1dwe4 active soic dw 20 25 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245a-1dwr active soic dw 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245a-1dwre4 active soic dw 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245a-1n active pdip n 20 20 pb-free (rohs) cu nipdau n / a for pkg type sn74als245a-1ne4 active pdip n 20 20 pb-free (rohs) cu nipdau n / a for pkg type sn74als245a-1nsr active so ns 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245a-1nsre4 active so ns 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245adble obsolete ssop db 20 tbd call ti call ti sn74als245adbr active ssop db 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245adbre4 active ssop db 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245adw active soic dw 20 25 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245adwr active soic dw 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245adwre4 active soic dw 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245an active pdip n 20 20 pb-free (rohs) cu nipdau n / a for pkg type sn74als245an3 obsolete pdip n 20 tbd call ti call ti sn74als245ane4 active pdip n 20 20 pb-free (rohs) cu nipdau n / a for pkg type sn74als245ansr active so ns 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245ansre4 active so ns 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74als245ansrg4 active so ns 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74as245dw active soic dw 20 25 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74as245dwe4 active soic dw 20 25 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74as245dwr active soic dw 20 2000 green (rohs & cu nipdau level-1-260c-unlim package option addendum www.ti.com 18-jul-2006 addendum-page 1
orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) no sb/br) sn74as245dwre4 active soic dw 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74as245n active pdip n 20 20 pb-free (rohs) cu nipdau n / a for pkg type sn74as245ne4 active pdip n 20 20 pb-free (rohs) cu nipdau n / a for pkg type sn74as245nsr active so ns 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn74as245nsre4 active so ns 20 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim snj54als245afk active lccc fk 20 1 tbd post-plate n / a for pkg type snj54als245aj active cdip j 20 1 tbd a42 snpb n / a for pkg type snj54als245aw active cfp w 20 1 tbd a42 n / a for pkg type snj54as245fk active lccc fk 20 1 tbd post-plate n / a for pkg type snj54as245j active cdip j 20 1 tbd a42 snpb n / a for pkg type (1) the marketing status values are defined as follows: active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device. (2) eco plan - the planned eco-friendly classification: pb-free (rohs), pb-free (rohs exempt), or green (rohs & no sb/br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. tbd: the pb-free/green conversion plan has not been defined. pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. pb-free (rohs exempt): this component has a rohs exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. the component is otherwise considered pb-free (rohs compatible) as defined above. green (rohs & no sb/br): ti defines "green" to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material) (3) msl, peak temp. -- the moisture sensitivity level rating according to the jedec industry standard classifications, and peak solder temperature. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis. package option addendum www.ti.com 18-jul-2006 addendum-page 2

mechanical data mlcc006b october 1996 post office box 655303 ? dallas, texas 75265 fk (s-cqcc-n**) leadless ceramic chip carrier 4040140 / d 10/96 28 terminal shown b 0.358 (9,09) max (11,63) 0.560 (14,22) 0.560 0.458 0.858 (21,8) 1.063 (27,0) (14,22) a no. of min max 0.358 0.660 0.761 0.458 0.342 (8,69) min (11,23) (16,26) 0.640 0.739 0.442 (9,09) (11,63) (16,76) 0.962 1.165 (23,83) 0.938 (28,99) 1.141 (24,43) (29,59) (19,32) (18,78) ** 20 28 52 44 68 84 0.020 (0,51) terminals 0.080 (2,03) 0.064 (1,63) (7,80) 0.307 (10,31) 0.406 (12,58) 0.495 (12,58) 0.495 (21,6) 0.850 (26,6) 1.047 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.035 (0,89) 0.010 (0,25) 12 13 14 15 16 18 17 11 10 8 9 7 5 4 3 2 0.020 (0,51) 0.010 (0,25) 6 1 28 26 27 19 21 b sq a sq 22 23 24 25 20 0.055 (1,40) 0.045 (1,14) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) notes: a. all linear dimensions are in inches (millimeters). b. this drawing is subject to change without notice. c. this package can be hermetically sealed with a metal lid. d. the terminals are gold plated. e. falls within jedec ms-004

mechanical data msso002e ? january 1995 ? revised december 2001 post office box 655303 ? dallas, texas 75265 db (r-pdso-g**) plastic small-outline 4040065 /e 12/01 28 pins shown gage plane 8,20 7,40 0,55 0,95 0,25 38 12,90 12,30 28 10,50 24 8,50 seating plane 9,90 7,90 30 10,50 9,90 0,38 5,60 5,00 15 0,22 14 a 28 1 20 16 6,50 6,50 14 0,05 min 5,90 5,90 dim a max a min pins ** 2,00 max 6,90 7,50 0,65 m 0,15 0 ? 8 0,10 0,09 0,25 notes: a. all linear dimensions are in millimeters. b. this drawing is subject to change without notice. c. body dimensions do not include mold flash or protrusion not to exceed 0,15. d. falls within jedec mo-150
important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all products are sold subject to ti?s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with ti?s standard warranty. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. ti assumes no liability for applications assistance or customer product design. customers are responsible for their products and applications using ti components. to minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any ti patent right, copyright, mask work right, or other ti intellectual property right relating to any combination, machine, or process in which ti products or services are used. information published by ti regarding third-party products or services does not constitute a license from ti to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alteration is an unfair and deceptive business practice. ti is not responsible or liable for such altered documentation. resale of ti products or services with statements different from or beyond the parameters stated by ti for that product or service voids all express and any implied warranties for the associated ti product or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. following are urls where you can obtain information on other texas instruments products and application solutions: products applications amplifiers amplifier.ti.com audio www.ti.com/audio data converters dataconverter.ti.com automotive www.ti.com/automotive dsp dsp.ti.com broadband www.ti.com/broadband interface interface.ti.com digital control www.ti.com/digitalcontrol logic logic.ti.com military www.ti.com/military power mgmt power.ti.com optical networking www.ti.com/opticalnetwork microcontrollers microcontroller.ti.com security www.ti.com/security low power wireless www.ti.com/lpw telephony www.ti.com/telephony video & imaging www.ti.com/video wireless www.ti.com/wireless mailing address: texas instruments post office box 655303 dallas, texas 75265 copyright ? 2006, texas instruments incorporated

▲Up To Search▲

Price & Availability of SN54ALS245AJ

	To Download SN54ALS245AJ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .