published date : feb 29,2008 drawing no : sdsa6493 v1 checked : shi n chi p.1/4 part number: DBBA14C2 14.22mm (0.56?) dual digit numeric display www.sunled.com part number emitting color emitting material luminous intensity (if=10ma) ucd wavelength nm p description min. typ. DBBA14C2 blue ingan 8000 17990 468 common cathode, rt. hand decimal absolute maximum ratings (t a =25c ) bba (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 120 mw operating temperature t a -40 ~ +85 storage temperature tstg -40 ~ +85 electrostatic discharge threshold (hbm) 1000 v lead solder temperature [2mm below package base] 260c for 3 ?5seconds c bba (ingan) unit forward voltage (typ.) (i f =10ma) v f 3.05 v forward voltage (max.) (i f =10ma) v f 4.0 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 468 nm wavelength of dominant emission (typ.) (i f =10ma) d 470 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 21 nm capacitance (typ.) (v f =0v, f=1mhz) c 100 pf operating characteristics (ta=25c ) attention observe precautions for handling electrostatic discharge sensitive devices features 0.56 inch digit height. low current operation. excellent character appearance. easy mounting on p.c. boards or sockets. two digit package simplifies alignments & assembly. i.c. compatible. mechanically rugged. standard: gray face, white segment. rohs compliant. preliminary spec notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0. 01") unless otherwise noted. 3.specifications are subject to change without notice.
published date : feb 29,2008 drawing no : sdsa6493 v1 checked : shi n chi p.2/4 part number: DBBA14C2 14.22mm (0.56?) dual digit numeric display www.sunled.com ? bba
published date : feb 29,2008 drawing no : sdsa6493 v1 checked : shi n chi p.3/4 part number: DBBA14C2 14.22mm (0.56?) dual digit numeric display www.sunled.com remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : feb 29,2008 drawing no : sdsa6493 v1 checked : shi n chi p.4/4 part number: DBBA14C2 14.22mm (0.56?) dual digit numeric display www.sunled.com packing & label specifications DBBA14C2
|
