micro-measurements@vishay.com MAK-1 vishay micro-measurements document number: 11040 revision 10-jan-03 www.vishaymg.com 83 master strain gage application kit surface preparation materials: csm degreaser, 1 can mca-1, m-prep conditioner a, 1 bottle mn5a-1, m-prep neutralizer 5a, 1 bottle silicon-carbide paper: 220, 320, 400 grit, one 10-ft [3-m] roll each csp-1, cotton swab, 4 packages gsp-1, gauze sponges, 2 packages rsk-1, rosin solvent, two 1-oz [30-ml] bottles application tools: ssh-1, surgical shears ssc-1, surgical scalpel and blade ssc-2, scalpel blades (5) btw-1, tweezers stw-1, tweezers dp-1, 4-h drafting pencil dwc-1, diagonal cutters dpr-1, dental probe (2) nnp-1, needle-nosed pliers sss-1, steel scale spt-1, spatula spt-2, spatula hardware: pct-2a, cellophane tape, 2 dispenser rolls pdt-1, drafting tape, 2 dispenser rolls mjg-2, mylar tape, 1 roll hsc-1, no. 1 spring clamps (4) hsc-2, no. 2 spring clamps (2) hsc-3, no. 3 spring clamp (1) tfe-1, teflon film, 1 roll gt-14, pressure pads & plates kit adhesives: m-bond 200, 1 kit m-bond ae-10, 1 kit m-bond 610, 1 kit soldering supplies: m8s-1-xxx, mark viii soldering unit (specify 115 or 230 vac) 361a-20r, 1 lb [0.45 kg] 361a-20r-25, 1 roll 450-20s-25, 1 roll 570-28r-20, 1 roll far-1, m-flux ar, 1 kit cpf-ast, terminal strip assortment, 1 box leadwire: 134-awp, 100 ft [30-m] 126-dwv: red, white, black, green, one 100-ft [30 m] roll each 326-dfv, 100 ft [30 m] 130-fwt: red, white, black, green, one 50-ft [15 m] roll each protective coatings: m-coat a, two 1-oz [30-ml] bottles m-coat b, two 1-oz [30-ml] bottles m-coat c, 1-oz [30-ml] bottle m-coat d, 1-oz [30-ml] bottle m-coat f, 1 kit 3145 rtv silicone rubber, 3-oz [85-g] tube features includes all supplies and special tools for making a wide range of strain gage installations for both laboratory and field applications. successfully complete any organic strain gage installation for operation from 452 to +500 f [?69 to +260 c]. all materials, including complete instructions, conveniently packaged in a molded, crush-proof, copolymer toolbox. reference: an adhesive selection table is provided in the ?-bond strain gage adhesives. mylar and teflon are registered trademarks of dupont. MAK-1 kit contents
|
