DBA500G no. a0699-1/3 features plastic molded structure peak reverse voltage : v rm =600v average output current : i o =50a specifications absolute maximum ratings at tc=25 c parameter symbol conditions ratings unit peak reverse voltage v rm 600 v average output current i o 50hz sine 1cycle peak value, tc=95 c, with heatsink 50 a surge forward current i fsm 50hz sine wave, non-repetitive, 1cycle peak value, tj=25 c 500 a current squared time i 2 t 1ms t<10ms, tj=25 c, rating of per diode 800 a 2 s junction temperature tj 150 c storage temperature tstg --40 to +150 c dilective strength voltage vdis terminals tc case, ac 1 minute 2 kv tightening torque tor ( ): recommended value 0.8(0.6) n? electrical characteristics at tc=25 c per constituent element of bridge. ratings parameter symbol conditions min typ max unit forward voltage v f i f =25a 1.05 v reverse current i r v r =600v 10 a thremal resistance rth(j-c) with heatsink (junction-case) 0.5 c / w marking: ba500g sanyo semiconductors data sheet ordering number : ena0699a 70710 tk im / 62007rb ti im tc-00000624 specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, av equipment, communication device, office equipment, industrial equipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. http:// semicon.sanyo.com/en/network DBA500G diffused junction silicon diode 50a single-phase bridge rectifier
DBA500G no. a0699-2/3 package dimensions electrical connection unit : mm (typ) 7806-001 * * : in case of over 30a of i o . bigger fasten hole should be filled by solder. lead-wire with solder connection also requested for over 30a of i o . 1234 24.0max 11.5max 1.5 4.0 5.0 9.0 6.35 7.0 12.8 13.1 12.5 9.0 7.0 c3.7 r1.75 13.6 6.35 0.8 13.6 13.1 12.5 36.0max 36.0max 12.8 1 2 3 4 1.8 2.4 3.5 forward voltage, v f -- v forward current, i f -- a i f -- v f average output current, i o -- a average forward power dissipation, p f -- w p f -- i o case temperature, tc -- c average output current, i o -- a i o -- tc number of cycles, n peak surge forward current, i fsm -- a i fsm -- n 0.1 0.2 0.4 0.6 0 1.0 2 7 5 3 2 10 2 7 5 3 1.4 0.8 1.0 1.2 it12123 10 20 30 40 50 60 0 20 0 40 60 80 100 120 it12125 tc=150 c 25 c 20 40 60 80 120 140 100 0 10 0 20 30 60 50 40 160 it12124 sin 23 1.0 10 200 400 600 100 300 500 0 7 523 100 7 5 it12126 tj=25 c 50hz sin tj=150 c 100 7 5 3
DBA500G no. a0699-3/3 ps sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. this catalog provides information as of july, 2010. specifications and information herein are subject to change without notice.
|
