MX-170 oven controlled crystal oscillator vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com ultra-high stability ? excellent temperature stability ? sc-cut crystal ? frequency range: 5 mhz to 15 mhz ? low package height ? cdma2000, wimax, lte and umts base stations ? test and measurement equipment ? broadcast reference standard ? features applications MX-170 performance specifcations frequency stabilities 1 parameter min typ max units condition vs. operating temperature range (referenced to +25c) -0.4 +0.4 ppb 0c to +70c (height code 1 only) -0.5 +0.5 ppb 0c to +70c (height code 0,1) -0.6 +0.6 ppb -20c to +70c (height code 1 only) -0.7 +0.7 ppb -20c to +70c (height code 0,1) -0.8 +0.8 ppb -40c to +85c (5v supply, height code 1 only) -1 +1 ppb -40c to +85c (5 v supply, height code 0,1) initial tolerance -50 +50 ppb at time of shipment, nominal efc vs. supply voltage change -0.5 +0.5 ppb v s 5% vs. load change -0.1 +0.1 ppb load 5% vs. aging / day -0.5 +0.5 ppb after 72 hours of operation vs. aging / day -0.1 +0.1 ppb after 7 days vs. aging / 1 year -20 +20 ppb after 72 hours of operation vs. aging / year (following years) -10 +10 ppb warm-up time 5 minutes to 10 ppb of fnal frequency (1 hour) @25c the MX-170 is a high stability single oven oscillator that ofers sub part per billion stability levels in a compact industry standard package. the MX-170 is the ideal foundation for high stability frequency reference solutions. description performance specifcations
performance specifcations vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com supply parameter min typ max units condition supply voltage (standard) 4.75 5.0 5.25 vdc supply voltage (option) 11.4 12.0 12.6 vdc power consumption @+5v (warm-up) 4 watts power consumption @+5v (steady state) 2 watts steady state @ +25c power consumption @+12v (warm-up) 4 watts power consumption @+12v (steady state) 2 watts steady state @ +25c rf output signal [option] hcmos load 15 pf signal level (vol) 0.5 vdc with 15pf load signal level (voh) 3.5 vdc with 15pf load duty cycle 45 55 % (voh-vol)/2 signal [standard] sinewave load 50 ohm output power +5.0 +7.0 +9.0 dbm 50 ohm load harmonics -40 dbc 50 ohm load sub-harmonics -40 dbc 50 ohm load frequency tuning (efc) tuning range 0.15 0.2 0.25 ppm linearity 5 % control voltage range 0 +2.5 +5.0 vdc tuning slope positive additional parameters phase noise @ 10 mhz -95 dbc/hz 1 hz -125 dbc/hz 10 hz -140 dbc/hz 100 hz -145 dbc/hz 1 khz -145 dbc/hz >10 khz short term stability 3 e-12 1 second tau weight 55 g processing & packing handling & processing note absolute maximum ratings supply voltage 15 vdc output load 50 25 pf ohm with hcmos signal with sinewave signal operable temperature range -55 +85 c storage temperature range -55 +125 c
type a code height h pin length l 0 15 6.35 1 19 6.35 pin connections 1 electronic frequency control (efc) 2 n/c 3 rf output 4 ground (case) 5 supply voltage input (vs) dimensions in mm outline drawing / enclosure vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com
ordering information mx - 170 0 - d a j - 400 1 - 10m0000000 product family mx: ocxo package 36 x 27 mm height 0: 15mm 1: 19 mm supply voltage b: 12 vdc d: 5 vdc stability code 109:1 ppb (temp code e, height code 0,1) 800: 0.8ppb (temp code e, height code 1) 700: 0.7ppb (temp code j, height code 0,1) 600: 0.6ppb (temp code j, height code 1) 500: 0.5ppb (temp code t, height code 0,1) 400: 0.4ppb (temp code t, height code 1) frequency frequency control 0: fixed frequency (no efc) 1: electrical tuning (efc) vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com disclaimer vectron international reserves the right to make changes to the product(s) and or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. rev: 02-14-12 for additional information, please contact usa: ero eraioa 267 lowell road hudson, nh 03051 tel: 1.888.328.7661 fax: 1.888.329.8328 europe: ero eraioa landstrasse, d-74924 neckarbischofsheim, germany tel: +49 (0) 3328.4784.17 fax: +49 (0) 3328.4784.30 asia: ero eraioa 1f-2f, no 8 workshop, no 308 fenju road waigaoqiao free trade zone pudong, shanghai, china 200131 tel: 86.21.5048.0777 fax: 86.21.5048.1881 rf output code a: hcmos e: sinewave temperature range e: -40c to +85c (supply voltage d only) j: -20c to +70c t: 0c to +70c notes: contact factory for improved stabilities or additional product options. 1. unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency 2. control voltage, load, temperature (25c). phase noise degrades with increasing output frequency. 3. subject to technical modifcation. 4. contact factory for availability. 5.
|
