? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 low cost two-way gmic smt power divider, 2200 - 2500 mhz rev. v5 ds52-0007 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? small size and low profile ? typical insertion loss: 1.0 db ? typical amplitude balance: 0.1 db ? 1 watt power handling ? sot-25 package description m/a-com?s ds52-0007 is an ic-based monolithic power divider using m/a-com?s gmic technology in a low cost sot-25 plastic package. this 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/ amplitude tracking and low co st are required. typi- cal applications include handsets, base station switching networks and other communication appli- cations where size and pcb real estate are at a premium. available in tape and reel. the ds52-0007 is fabricated using a passive- integrated circuit process. the process features full- chip passivation for increased performance and reli- ability. ordering information part number package ds52-0007 bulk packaging ds52-0007-tr 1000 piece reel DS52-0007SAM sample test board note: reference application note m513 for reel size information. pin configuration pin no. function 1 rf1 (out) 2 gnd 3 rf2 (out) 4 gnd 5 rf in functional block diagram 4 5 3 2 1 rf in gnd rf1 (out) gnd rf2 (out)
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 low cost two-way gmic smt power divider, 2200 - 2500 mhz rev. v5 ds52-0007 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications: t a = 25c, z 0 = 50 parameter frequency units min typ max insertion loss (above 3.0 db theoretical loss) 2200 - 2500 mhz db ? 1.0 1.1 isolation 2200 - 2500 mhz db 15 22 ? input vswr 2200 - 2500 mhz ratio ? 1.6:1 1.8:1 output vswr 2200 - 2500 mhz ratio ? 1.3:1 1.5:1 amplitude balance 2200 - 2500 mhz db ? 0.1 ? phase balance 2200 - 2500 mhz ? 2 ? recommended pcb configuration absolute maximum ratings 1,2 parameter absolute maximum input power 3 1 w cw operating temperature -40c to +85c storage temperature -65c to +150c 1. exceeding any one or combination of these limits may cause permanent damage to this device. 2. m/a-com does not recommend sustained operation near these survivability limits. 3. with internal load dissipation of 0.125 w maximum. handling procedures please observe the following precautions to avoid damage: static sensitivity gmic circuits are sens itive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices. dimensions in inches. circuit material: fr-4, .016 thick.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 low cost two-way gmic smt power divider, 2200 - 2500 mhz rev. v5 ds52-0007 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. isolation vs. frequency vswr vs. frequency typical performance curves @ 25oc insertion loss vs. frequency 0.0 0.5 1. 0 1. 5 2200 2275 2350 2425 2500 fre qu e n cy (mh z ) insertion loss (db) 14 16 18 20 22 24 26 2200 2275 2350 2425 2500 fre qu e n cy (mh z ) isolation (db) 1. 0 1. 2 1. 4 1. 6 1. 8 2.0 2200 2275 2350 2425 2500 frequency (mhz) vswr input output
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 4 low cost two-way gmic smt power divider, 2200 - 2500 mhz rev. v5 ds52-0007 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. sot-25 ? ? reference application note m 538 for lead-free solder reflow recommendations.
|
