document number: 36023 for technical questions, contact: connectors@vishay.com www.vishay.com revision: 27-mar-07 1 printed circuit dip solder connector series 300 vishay dale applications where permanent mounting of male connector to printed circuit board is required with mating female connector available. electrical specifications current rating: 7.5 a breakdown voltage: at sea level: 3600 v rms at 70 000 feet: 975 v rms features ? right angle or straight through dip solder terminals ? threaded mounting studs ? male contacts molded in ? mating connector has solder cup or dip solder terminals ? female contacts float to aid in alignment and resist vibration ? permanent mounting provides greater reliability ? polarization provided by co ntact arrangement and guide pin location ? meets applicable paragraphs of mil-c-55302 material specifications contact pin: phosphor bronze contact socket: phosphor bronze contact plating: gold plated guide pins: stainless steel, passivated standard body: glass-filled diallyl phthalate per mil-m-14, type sdg-f green. other body material supplied upon request physical specifications number of contacts: 7, 15, 19 and 25 contact spacing: 0.250", staggered rows provide a 0.125" grid contact gauge: #20 awg minimum creepage path between contacts: 0.16" minimum air spaceb etween contacts: 0.11" dimensions in inches (millimeters) 2.150 + 0.015/- 0.000 b c a d e f h b c a d e f h j k l m n p r s b c a d e f h j k l m n p r s t u v w bb z y x w v u t s r p n m l k j h f e d a c b aa cc 3/16 [4.76] 1.150 + 0.015/- 0.000 [29.200 + 0.381/- 0.000] 1.450 + 0.015/- 0.000 [36.800 + 0.381/-0.000] (0.750) ([19.0]) 0.36 [9.14] 7 contacts 0.125 0.003 [3.180 0.076] 15 contacts 19 contacts 25 contacts [54.600 + 0.381/- 0.000] 2.450 + 0.015/- 0.000 [62.200 + 0.381/- 0.000] [9.14] 0.36 (1.750) ([44.4]) 0.36 [9.14] 2.650 + 0.015/- 0.000 [67.300 + 0.381/- 0.000] 2.950 + 0.015/- 0.000 [74.900 + 0.381/- 0.000] [9.14] 0.36 (2.250) ([57.2]) 3.400 + 0.015/- 0.000 [86.400 + 0.381/- 0.000] 3.700 + 0.015/- 0.000 [94.000 + 0.381/- 0.000] (3.000) ([76.2]) 0.453 [11.5] 0.200 [5.08] [5.08] 0.200 0.010 0.181 [4.60] 0.242 [6.15] 0.06 [1.52] (typ.) 7/64 [2.78] 7/64 [2.78] (typ.) 0.06 [1.52] 0.242 [6.15] 0.181 [4.60] [3.180 0.076] 0.125 0.003 4-40 u n c 2a (typ.) (typ.) 4-40 u n c 2a 7/64 [2.78] 4-40 u n c 2a (typ.) 0.125 0.003 [3.180 0.076] 0.181 [4.60] 0.242 [6.15] 0.06 [1.52] (typ.) 7/64 [2.78] (typ.) 0.06 [1.52] 0.242 [6.15] 0.181 [4.60] [3.180 0.076] 0.125 0.003 (typ.) 4-40 u n c 2a 0.125 0.003 [3.180 0.076] (typ.) 0.220 [5.59] 0.032 [0.813] (typ.) 0.125 0.002 [3.180 0.051] 0.300 [7.62] 15/64 [5.95] ? 0.040 [1.02] (typ.) co n tact pi n ? 0.093 [2.36] (typ.) guide pi n typical side view 300pr
www.vishay.com for technical questions, contact: connectors@vishay.com document number: 36023 2 revision: 27-mar-07 series 300 vishay dale printed circuit dip solder connector dimensions in inches (millimeters) a b c d e f h j k l m n p r s t u v w a b c d e f h j k l m n p r s t u v w x y z aa bb cc s r p n m l k j h f e d c b a h f e d c b a "a" 1.150 + 0.015/- 0.000 [29.200 + 0.381/- 0.000] 1.450 + 0.015/- 0.000 [36.800 + 0.381/- 0.000] (0.750) ([19.0]) 0.36 [9.14] 7 contacts 0.117 [2.97] 0.125 0.003 [3.180 0.076] 15 contacts 19 contacts 25 contacts 2.150 + 0.015/- 0.000 [54.600 + 0.381/- 0.000] 2.450 + 0.015/- 0.000 [62.200 + 0.381/- 0.000] [9.14] 0.36 (1.750) ([44.4]) [3.180 0.076] 0.125 0.003 [2.97] 0.117 0.36 [9.14] 0.117 [2.97] 0.125 0.003 [3.180 0.076] 2.650 + 0.015/- 0.000 [67.300 + 0.381/- 0.000] 2.950 + 0.015/- 0.000 [74.900 + 0.381/- 0.000] [9.14] 0.36 [3.180 0.076] 0.125 0.003 [2.97] 0.117 (2.250) ([57.2]) 3.400 + 0.015/- 0.000 [86.400 + 0.381/- 0.000] 3.700 + 0.015/- 0.000 [94.000 + 0.381/- 0.000] (3.000) ([76.2]) 3/32 [2.38] 0.453 [11.5] 0.200 [5.08] [5.08] 0.200 0.125 0.003 [3.180 0.076] (typ.) typical side view 0.010 guide socket 4-40 u n c 2a (typ.) 3/16 [4.76] hex n ut (typ.) 0.06 [1.52] (typ.) ? 0.156 [3.96] (2 plcs.) 0.125 [3.18] (typ.) 0.125 [3.18] 0.375 [9.52] mi n . "b" 0.010 [ 0.254] "c" panel cutout 1/32 [0.794] r. (typ.) r. (typ.) 5/16 [7.94] ? 0.046 [1.17] solder cup #20 a w g (typ.) 300s a b c d e f h j k l m n p r s t u v w a b c d e f h j k l m n p r s t u v w x y z aa bb cc s r p n m l k j h f e d c b a h f e d c b a 1.150 + 0.015/- 0.000 [29.200 + 0.381/- 0.000] 1.450 + 0.015/- 0.000 [36.800 + 0.381/- 0.000] (0.750) ([19.0]) 0.36 [9.14] 7 contacts 0.117 [2.97] 0.125 0.003 [3.180 0.076] 15 contacts 19 contacts 25 contacts 2.150 + 0.015/- 0.000 [54.600 + 0.381/- 0.000] 2.450 + 0.015/- 0.000 [62.200 + 0.381/- 0.000] [9.14] 0.36 (1.750) ([44.4]) [3.180 0.076] 0.125 0.003 [2.97] 0.117 0.36 [9.14] 0.117 [2.97] 0.125 0.003 [3.180 0.076] 2.650 + 0.015/- 0.000 [67.300 + 0.381/- 0.000] 2.950 + 0.015/- 0.000 [74.900 + 0.381/- 0.000] [9.14] 0.36 [3.180 0.076] 0.125 0.003 [2.97] 0.117 (2.250) ([57.2]) 3.400 + 0.015/- 0.000 [86.400 + 0.381/- 0.000] 3.700 + 0.015/- 0.000 [94.000 + 0.381/- 0.000] (3.000) ([76.2]) 3/32 [2.38] 0.453 [11.5] 7/32 [5.56] 1/8 [3.18] 0.200 [5.08] [5.08] 0.200 0.125 0.003 [3.180 0.076] (typ.) typical side view 0.010 guide socket 4-40 u n c 2a (typ.) 3/16 [4.76] hex n ut (typ.) 0.06 [1.52] (typ.) ? 0.032 [0.813] (typ.) ? 0.156 [3.96] (2 plcs.) 0.125 [3.18] (typ.) 0.125 [3.18] 0.375 [9.52] mi n . "b" 0.010 [ 0.254] "a" "c" panel cutout 1/32 [0.794] r. (typ.) r. (typ.) 300se
document number: 36023 for technical questions, contact: connectors@vishay.com www.vishay.com revision: 27-mar-07 3 series 300 printed circuit dip solder connector vishay dale ordering information 300 pr -7 w model contacts number of contacts without guides s = socket with solder cup pe = pin with dip solder terminals se = socket with dip solder terminals pr = pin with right angle dip solder terminals (optional on s, pe, and se models only) dimensions in inches (millimeters) a b d c f e h e f c d b a s h j l k n m r p p r m n k l j h w a b d c f e s t u v v u t s e f c d b a w h j l k n m r p u v u v u v (0.750) ([19.05]) ? 0.093 [? 2.36] (typ.) 0.06 [1.52] (typ.) 0.032 (typ.) [? 0.813] 0.125 0.003 [3.18 0.08] (typ.) 0.200 [5.08] (typ.) 1/8 [3.18] 3/16 [4.76] 15/64 [5.95] 0.453 [11.5] 7/32 [5.56] ? 0.040 [? 1.02] (typ.) 3/16 hex n ut [4.76] (typ.) 4-40 u n c 2a (typ.) 0.010 0.36 [9.14] 7 contacts 1.150 + 0.015/- 0.000 [29.21 + 0.38/- 0.00] 1.450 + 0.015/- 0.005 [36.83 + 0.38/- 0.13] 0.125 0.003 [3.18 0.08] 0.117 [2.97] [2.97] 0.117 [3.18 0.08] 0.125 0.003 [62.23 + 0.38/- 0.13] 2.450 + 0.015/- 0.005 [54.61 + 0.38/- 0.00] 2.150 + 0.015/- 0.000 15 contacts [9.14] 0.36 ([44.45]) (1.750) (2.250) ([57.15]) 0.36 [9.14] 19 contacts 2.650 + 0.015/- 0.000 [67.31 + 0.38/- 0.00] 2.950 + 0.015/- 0.005 [74.93 + 0.38/- 0.13] 0.125 0.003 [3.18 0.08] 0.117 [2.97] [2.97] 0.117 [3.18 0.08] 0.125 0.003 [93.98 + 0.38/- 0.13] 3.700 + 0.015/- 0.005 [86.36 + 0.38/- 0.00] 3.400 + 0.015/- 0.000 25 contacts [9.14] 0.36 ([76.20]) (3.000) typical side view 300pe
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
