spl pl85 impuls-laserdiode im plasti kgeh?use 10 w spitzenleistung pulsed laser diode in plas tic package 10 w peak power 2004-11-29 1 besondere merkmale ? kostengnstiges plastikgeh?use zuverl?ssiges ingaas/gaas kompressiv verspanntes halbleiter-material hochleistungslaser mit ?large-optical-cavity? (loc) struktur fr ein schmales fernfeld laterale austritts?ffnung 200 m anwendungen entfernungsmessung sicherheit, berwachung beleuchtung, zndung test- und messsysteme sicherheitshinweise je nach betriebsart em ittieren diese bauteile hochkonzentrierte, nicht sichtbare infrarot- strahlung, die gef?hrlich fr das menschliche auge sein kann. produkte, die diese bauteile enthalten, mssen gem?? den sicherheits- richtlinien der iec-norm 60825-1 behandelt werden. typ type opt. spitzenausgangsleistung opt. peak power wellenl?nge wavelength bestellnummer ordering code spl pl85 10 w 850 nm Q62702P1759 features low cost plastic package reliable strained ingaas/gaas material high power large-optical-cavity (loc) structure for a narrow far-field lateral laser aperture 200 m applications range finding security, surveillance illumination, ignition test and measurement systems safety advices depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. products which incorporate these devices have to follow the safety precautions given in iec 60825-1 ?safety of laser products?. deutschland: inselkammerstra?e 10 d-82008 unterhaching tel: 089 614 503-10 e-mail: power@hy-line.de url: www.hy-line.de schweiz: grndenstra?e 82 ch-8247 flurlingen tel.: 052 647 42 00 e-mail: power@hy-line.ch url: www.hy-line.ch
2004-11-29 2 spl pl85 grenzwerte ( t a = 25 c) maximum ratings parameter parameter symbol symbol werte values einheit unit min. max. spitzenausgangsleistung peak output power p peak ?13w durchla?strom forward current i f ?12a pulsbreite (halbwertsbreite) pulse width (fwhm) t p ? 100 ns tastverh?ltnis duty cycle d.c. ?0.1% sperrspannung reverse voltage v r ?3v betriebstemperatur operating temperature t op - 40 + 85 c lagertemperatur storage temperature t stg - 40 + 100 c l?ttemperatur ( t max = 10 s, 2 mm von geh?useunterseite) soldering temperature ( t max = 10 s, 2 mm from bottom edge of case) t s ? + 260 c
spl pl85 2004-11-29 3 optische kennwerte ( t a = 25 c) optical characteristics parameter parameter symbol symbol werte values einheit unit min. typ. max. zentrale emissionswellenl?nge 1) emission wavelength 1) peak 840 850 860 nm spektrale breite (halbwertsbreite) 1) spectral width (fwhm) 1) ?4 ?nm spitzenausgangsleistung 1) peak output power 1) p op 71013w schwellstrom threshold current i th 0.5 0.75 1 a betriebsspannung 1) operating voltage 1) v op 2.0 2.5 3.0 v minimale anstiegs- und abfallzeit (10% ? 90%) minimum rise and fall time (10% ? 90%) t r , t r -1 -ns austritts?ffnung aperture size w h 200 2 m 2 strahldivergenz (halbwertsbreite) beam divergence (fwhm) || ? 11 25 ? grad deg. temperaturkoeffizient der wellenl?nge 2) temperature coefficient of wavelength 2) / t ? 0.25 ? nm/k temperaturkoeffizient der opt. ausgangsleistung temperature coefficient of optical power p op / p op t ?-0.4?%/k thermischer widerstand thermal resistance r th ja ?160?k/w 1) standardbetriebsbedingungen beziehen sich auf eine pulsbreite von 100 ns bei einer frequenz von 1 khz und einem betriebsstrom von 10 a bei t a = 25 c. standard operating conditions refer to pulses of 100 ns width at 1 khz ra te with 10 a operating current at t a = 25 c.
spl pl85 2004-11-29 4 optical output power p opt and forward voltage v f vs. forward current i f ( t a = 25 c) far-field distribution parallel to junction i rel vs. || ( t a = 25 c, p opt = 10 w) optical spectrum, relative intensity i rel vs. wavelength ( t a = 25 c, p opt = 10 w) far-field distribution perpendicular to junction i rel vs. ( t a = 25 c, p opt = 10 w) ohw00914 0 f v f i 5 10 15 20 a v 1 2 3 4 opt p 0 10 20 30 40 v p w deg -30 0.25 0 0.50 0.75 i rel 1.00 ohl00746 -20 -10 0 10 30 ohw00901 0 838 rel 20 40 60 80 100 842 846 850 854 858 nm % ohl00747 0 -40 0.25 0.50 0.75 1.00 deg i rel -30 -20 -10 0 10 20 40
spl pl85 2004-11-29 5 ma?zeichnung package outlines ma?e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). 4.2 (0.165) 5.0 (0.197) 27.0 (1.063) 29.0 (1.142) 1.8 (0.071) 1.2 (0.047) spacing 2.54 (0.100) mm 0.4 (0.016) 0.6 (0.024) 0.8 (0.031) 0.4 (0.016) cathode chip position area not flat 5.5 (0.217) 5.9 (0.232) bottom view 0.4 (0.016) 0.6 (0.024) chip position geoy6066 3.5 (0.138) 0.1 (0.004) ... 0.7 (0.028) 5.1 (0.201) 4.8 (0.189) 1.7 (0.067) 3.7 (0.146) 1.9 (0.075) a a ?0.3 x y detail x detail y 5 5
2004-11-29 6 spl pl85 published by osram opto semico nductors gmbh wernerwerkstrasse 2, d-93049 regensburg www.osram-os.com ? all rights reserved. the information describes the type of component and shall not be considered as assured characteristics. terms of delivery and rights to change design reserv ed. due to technical requirements components may contain dangerous substances. for information on the types in question please contact our sales organization. packing please use the recycling operators known to you. we can also help you ? get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. y ou must bear the costs of transport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or system s must be expressly authorized for such purpose! critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of osram os. 1 a critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support de vice or system, or to affect its safety or effectiveness of that device or system. 2 life support devices or systems are intended (a) to be im planted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health of the user may be endangered. deutschland: inselkammerstra?e 10 d-82008 unterhaching tel: 089 614 503-10 e-mail: power@hy-line.de url: www.hy-line.de schweiz: grndenstra?e 82 ch-8247 flurlingen tel.: 052 647 42 00 e-mail: power@hy-line.ch url: www.hy-line.ch
|
