View LYGT670-LK_3753597.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lsg t670, lsp t670, lsy t670, lop t670, lyg t670 multi topled ? 2003-03-04 1 besondere merkmale ? geh ? usetyp: wei ? es p-lcc-4 geh ? use besonderheit des bauteils: beide leuchtdiodenchips getrennt ansteuerbar, hohe signalwirkung durch farbwechsel der led m ? glich wellenl ? nge: 628 nm (super-rot), 606 nm (orange), 590 nm (gelb), 570 nm (gr n), 560 nm (pure green) abstrahlwinkel: lambertscher strahler (120 ) technologie: gaalp (super-rot, orange, gelb, gr n), gap (pure green) optischer wirkungsgrad: 1,5 lm/w (super-rot, orange, gelb), 2,5 lm/w (gr n), 0,6 lm/w (pure green) gruppierungsparameter: lichtst ? rke verarbeitungsmethode: f r alle smt-best cktechniken geeignet l ? tmethode: ir reflow l ? ten und wellenl ? ten (ttw) vorbehandlung: nach jedec level 2 gurtung: 8 mm gurt mit 2000/rolle, ? 180 mm oder 8000/rolle, ? 330 mm anwendungen informationsanzeigen im innen- und au ? enbereich optischer indikator hinterleuchtung (schalter, tasten, displays, werbebeleuchtung, allgemeinbeleuchtung) innenbeleuchtung im automobilbereich (z. b. instrumentenbeleuchtung) markierungsbeleuchtung (z.b. stufen, fluchtwege, u. ? .) einkopplung in lichtleiter laufschriftanzeigen signal- und symbolleuchten features package: white p-lcc-4 package feature of the device: both chips can be controlled separately, high signal efficiency possible by color change of the led wavelength: 628 nm (super-red), 606 nm (orange), 590 nm (yellow), 570 nm (green), 560 nm (pure green) viewing angle: lambertian emitter (120 ) technology: gaalp (super-red, orange, yellow, green), gap (pure green) optical efficiency: 1.5 lm/w (super-red, orange, yellow), 2.5 lm/w (green), 0.6 lm/w (pure green) grouping parameter: luminous intensity assembly methods: suitable for all smt assembly methods soldering methods: ir reflow soldering and ttw soldering preconditioning: acc. to jedec level 2 taping: 8 mm tape with 2000/reel, ? 180 mm or 8000/reel, ? 330 mm applications indoor and outdoor displays optical indicators backlighting (switches, keys, displays, illuminated advertising, general lighting) interior automotive lighting (e.g. dashboard backlighting) marker lights (e.g. steps, exit ways, etc.) coupling into light guides light writing displays signal and symbol luminaire
2003-03-04 2 lsg t670, lsp t670, lsy t670, lop t670, lyg t670 typ type emissions- farbe color of emission farbe der lichtaustritts- fl ? che color of the light emitting area lichtst ? rke luminous intensity i f = 10 ma i v (mcd) bestellnummer ordering code color 1 color 2 lsg t670 lsg t670-j+j lsg t670-j+k lsg t670-j+l lsg t670-k+j lsg t670-k+k lsg t670-k+l lsg t670-l+j lsg t670-l+k lsg t670-l+l super-red / green colorless clear 4.5 ... 18.0 4.5 ... 7.1 4.5 ... 7.1 4.5 ... 7.1 7.1 ... 11.2 7.1 ... 11.2 7.1 ... 11.2 11.2 ... 18.0 11.2 ... 18.0 11.2 ... 18.0 4.5 ... 18.0 4.5 ... 7.1 7.1 ... 11.2 11.2 ... 18.0 4.5 ... 7.1 7.1 ... 11.2 11.2 ... 18.0 4.5 ... 7.1 7.1 ... 11.2 11.2 ... 18.0 q62703q4316 lsp t670 lsp t670-h+g lsp t670-h+h lsp t670-j+g lsp t670-j+h lsp t670-j+j lsp t670-k+g lsp t670-k+h lsp t670-k+j super-red / pure green colorless clear 2.8 ... 11.2 2.8 ... 4.5 2.8 ... 4.5 4.5 ... 7.1 4.5 ... 7.1 4.5 ... 7.1 7.1 ... 11.2 7.1 ... 11.2 7.1 ... 11.2 1.8 ... 7.1 1.8 ... 2.8 2.8 ... 4.5 1.8 ... 2.8 2.8 ... 4.5 4.5 ... 7.1 1.8 ... 2.8 2.8 ... 4.5 4.5 ... 7.1 q62703q4318 lsy t670 lsy t670-j+j lsy t670-j+k lsy t670-j+l lsy t670-k+j lsy t670-k+k lsy t670-k+l lsy t670-l+j lsy t670-l+k lsy t670-l+l super-red / yellow colorless clear 4.5 ... 18.0 4.5 ... 7.1 4.5 ... 7.1 4.5 ... 7.1 7.1 ... 11.2 7.1 ... 11.2 7.1 ... 11.2 11.2 ... 18.0 11.2 ... 18.0 11.2 ... 18.0 4.5 ... 18.0 4.5 ... 7.1 7.1 ... 11.2 11.2 ... 18.0 4.5 ... 7.1 7.1 ... 11.2 11.2 ... 18.0 4.5 ... 7.1 7.1 ... 11.2 11.2 ... 18.0 q62703q4317
lsg t670, lsp t670, lsy t670, lop t670, lyg t670 2003-03-04 3 helligkeitswerte werden mit einer stromeinpr ? gedauer von 25 ms und einer genauigkeit von 11 % ermittelt. luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11 %. anm.: die standardlieferform von serientypen beinhaltet eine familiengruppe. einzelne gruppen sind nicht erh?ltlich. in einer verpackungseinheit / gurt ist immer nur eine gruppe pro farbe enthalten. streuung der lichtst?rke in einer verpackungseinheit i v max / i v min 2.0 streuung der lichtst?rke in einer led i v max / i v min 3.0 (lsg t670, lsy t670), 4.0 (lsp t670, lop t670) note: the standard shipping format for serial types includes a family group. individual groups are not available. no packing unit / tape ever contains more than one luminous intensity group per color. luminous intensity ratio in one packaging unit i v max / i v min 2.0 luminous intensity ratio in one led i v max / i v min 3.0 (lsg t670, lsy t670), 4.0 (lsp t670, lop t670) lop t670 lop t670-j+g lop t670-j+h lop t670-j+j lop t670-k+g lop t670-k+h lop t670-k+j orange / pure green colorless clear 4.5 ... 11.2 4.5 ... 7.1 4.5 ... 7.1 4.5 ... 7.1 7.1 ... 11.2 7.1 ... 11.2 7.1 ... 11.2 1.8 ... 7.1 1.8 ... 2.8 2.8 ... 4.5 4.5 ... 7.1 1.8 ... 2.8 2.8 ... 4.5 4.5 ... 7.1 q62703q4319 lyg t670 lyg t670-j+j lyg t670-j+k lyg t670-j+l lyg t670-k+j lyg t670-k+k lyg t670-k+l lyg t670-l+j lyg t670-l+k lyg t670-l+l yellow / green colorless clear 4.5 ... 18.0 4.5 ... 7.1 4.5 ... 7.1 4.5 ... 7.1 7.1 ... 11.2 7.1 ... 11.2 7.1 ... 11.2 11.2 ... 18.0 11.2 ... 18.0 11.2 ... 18.0 4.5 ... 18.0 4.5 ... 7.1 7.1 ... 11.2 11.2 ... 18.0 4.5 ... 7.1 7.1 ... 11.2 11.2 ... 18.0 4.5 ... 7.1 7.1 ... 11.2 11.2 ... 18.0 q62703q4502 typ type emissions- farbe color of emission farbe der lichtaustritts- fl ? che color of the light emitting area lichtst ? rke luminous intensity i f = 10 ma i v (mcd) bestellnummer ordering code color 1 color 2
2003-03-04 4 lsg t670, lsp t670, lsy t670, lop t670, lyg t670 grenzwerte maximum ratings bezeichnung parameter symbol symbol wert value einheit unit ls, lo, ly, lg lp betriebstemperatur operating temperature range t op ? 40 ? + 100 c lagertemperatur storage temperature range t stg ? 40 ? + 100 c sperrschichttemperatur junction temperature t j + 100 c durchlassstrom forward current i f 30 ma sto ? strom surge current t 10 s, d = 0.005 i fm 0.5 a sperrspannung 1) reverse voltage v r 12 v leistungsaufnahme power consumption p tot 95 90 mw w ? rmewiderstand thermal resistance sperrschicht / umgebung 1 chip on junction / air 2 chips on sperrschicht / l ? tpad 1 chip on junction / solder point 2 chips on montage auf pc-board fr 4 (padgr ?? e 16 mm 2 ) mounted on pc board fr 4 (pad size 16 mm 2 ) r th ja r th ja r th js r th js 480 650 260 430 k/w k/w k/w k/w 1) f r kurzzeitigen betrieb geeignet / suitable for short term application
lsg t670, lsp t670, lsy t670, lop t670, lyg t670 2003-03-04 5 bezeichnung ( t a = 25 c) parameter symbol symbol wert value einheit unit ls lo ly lg lp wellenl ? nge des emittierten lichtes (typ.) wavelength at peak emission i f = 10 ma peak 635 610 586 572 557 nm dominantwellenl ? nge 1) (typ.) dominant wavelength 1) i f = 10 ma dom 628 ?6 606 ?6 590 ?6 570 ?6 560 ?6 nm spektrale bandbreite bei 50 % i rel max (typ.) spectral bandwidth at 50 % i rel max i f = 10 ma ? 45 40 45 25 22 nm abstrahlwinkel bei 50 % i v (vollwinkel) (typ.) viewing angle at 50 % i v 2 ? 120 120 120 120 120 grad deg. durchlassspannung 2) (typ.) forward voltage 2) (max.) i f = 10 ma v f v f 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 v v sperrstrom (typ.) reverse current (max.) v r = 12 v i r i r 0.01 10 0.01 10 0.01 10 0.01 10 0.01 10 a a temperaturkoeffizient von peak (typ.) temperature coefficient of peak i f = 10 ma; ? 10 c t 100 c tc peak 0.11 0.12 0.10 0.11 0.11 nm/k temperaturkoeffizient von dom (typ.) temperature coefficient of dom i f = 10 ma; ? 10 c t 100 c tc dom 0.07 0.07 0.07 0.07 0.05 nm/k temperaturkoeffizient von v f (typ.) temperature coefficient of v f i f = 10 ma; ? 10 c t 100 c tc v -1.9 -1.9 -1.9 -1.4 -2.1 mv/k optischer wirkungsgrad (typ.) optical efficiency i f = 10 ma opt 1.5 1.5 1.5 2.5 0.6 lm/w 1) wellenl ? ngen werden mit einer stromeinpr ? gedauer von 25 ms und einer genauigkeit von 1 nm ermittelt. wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. 2) spannungswerte werden mit einer stromeinpr ? gedauer von 1 ms und einer genauigkeit von 0,1 v ermittelt. voltages are tested at a current pulse duration of 1 ms and a tolerance of ?.1 v.
2003-03-04 6 lsg t670, lsp t670, lsy t670, lop t670, lyg t670 relative spektrale emission i rel = f ( ), t a = 25 c, i f = 10 ma relative spectral emission v( ) = spektrale augenempfindlichkeit standard eye response curve abstrahlcharakteristik i rel = f ( ? ) radiation characteristic % rel ohl01697 100 80 60 40 20 0 400 450 500 550 600 650 700 nm i pure-green green yellow orange super-red v 0 0.2 0.4 1.0 0.8 0.6 ? 1.0 0.8 0.6 0.4 0? 10? 20? 40? 30? ohl01660 50? 60? 70? 80? 90? 100? 0? 20? 40? 60? 80? 100? 120?
lsg t670, lsp t670, lsy t670, lop t670, lyg t670 2003-03-04 7 durchlassstrom i f = f ( v f ) forward current t a = 25 c maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current relative lichtst ? rke i v / i v(10 ma) = f ( i f ) relative luminous intensity t a = 25 c maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current 10 -1 v pure-green 5 super-red orange/yellow green ohl0214 5 i f f v 0 10 1 10 2 10 5 ma 1.0 1.4 1.8 2.2 2.6 3.0 3.4 1 chip on 2 chips on ma 35 30 25 20 15 10 5 ? c 0 i f 0 ohl00241 20 40 60 80 100 t a temp. ambient t v v (10 ma) 10 -1 0 10 10 12 10 ma red yellow green super-red orange pure-green 10 -3 5 ohl02146 f 5 -2 10 5 -1 10 0 10 1 10 55 0 ohl00956 ? c 0 20 40 60 80 100 5 10 15 20 25 30 35 1 chip on 2 chips on temp. solder point t s t f i
lsg t670, lsp t670, lsy t670, lop t670, lyg t670 2003-03-04 8 relative lichtst ? rke i v / i v(25 c) = f ( t a ) relative luminous intensity i f = 10 ma zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c yellow green orange super-red pure-green 0.0 ohl02150 ? c a 0 20 40 60 80 100 v v i i 0.4 0.8 1.2 1.6 2.0 (25 ? c) t ohl01686 s 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 t d i t t p f t p = d = 0.005 0.01 0.02 0.05 0.2 0.5 dc 10 1 5 i f t 2 10 0.1 p 10 3 ma
lsg t670, lsp t670, lsy t670, lop t670, lyg t670 2003-03-04 9 ma ? zeichnung package outlines ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). kathodenkennung: abgeschr ? gte ecke cathode mark: bevelled edge gewicht / approx. weight: 35 mg marking package gply6837 23 4 1 0.8 (0.031) 0.6 (0.024) 2.6 (0.102) 2.1 (0.083) 2.3 (0.091) 3.0 (0.118) 3.4 (0.134) 3.0 (0.118) (2.4 (0.094)) 2.1 (0.083) 1.7 (0.067) 0.9 (0.035) 0.7 (0.028) 4 ? 1 0.1 (0.004) typ 1.1 (0.043) 3.3 (0.130) 3.7 (0.146) 0.5 (0.020) 0.12 (0.005) 0.18 (0.007) 0.4 (0.016) 0.6 (0.024) c a circuit diagram c a l color 1 color 2 t670 led emission color 1 emission color 2 package cathode: pin 1 cathode: pin 3
2003-03-04 10 lsg t670, lsp t670, lsy t670, lop t670, lyg t670 l ? tbedingungen vorbehandlung nach jedec level 2 soldering conditions preconditioning acc. to jedec level 2 ir-reflow l ? tprofil (nach ipc 9501) ir reflow soldering profile (acc. to ipc 9501) ohly0597 0 0 50 100 150 200 250 50 100 150 200 250 300 t t ? c s 240-245 ? c 10-40 s 183 ? c 120 to 180 s defined for preconditioning: up to 6 k/s ramp-down rate up to 6 k/s ramp-up rate up to 6 k/s defined for preconditioning: 2-3 k/s
lsg t670, lsp t670, lsy t670, lop t670, lyg t670 2003-03-04 11 wellenl ? ten (ttw) (nach cecc 00802) ttw soldering (acc. to cecc 00802) ohly0598 0 0 50 100 150 200 250 50 100 150 200 250 300 t t c s 235 c 10 s c ... 260 1. welle 1. wave 2. welle 2. wave 5 k/s 2 k/s ca 200 k/s cc ... 130 100 2 k/s zwangsk ? hlung forced cooling normalkurve standard curve grenzkurven limit curves
2003-03-04 12 lsg t670, lsp t670, lsy t670, lop t670, lyg t670 empfohlenes l ? tpaddesign ir reflow l ? ten recommended solder pad ir reflow soldering ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). ohlpy439 padgeometrie f ? r verbesserte w ? rmeableitung improved heat dissipation paddesign for l ? tstoplack solder resist 1.1 (0.043) 4.5 (0.177) 1.5 (0.059) 2.6 (0.102) 3.3 (0.130) 0.5 (0.020) 7.5 (0.295) 0.4 (0.016) cathode marking kathoden markierung / cu fl ? che / 12 mm per pad 2 cu-area _ < 3.3 (0.130)
lsg t670, lsp t670, lsy t670, lop t670, lyg t670 2003-03-04 13 empfohlenes l ? tpaddesign wellenl ? ten (ttw) recommended solder pad ttw soldering ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). gurtung / polarit ? t und lage verpackungseinheit 2000/rolle, 180 mm oder 8000/rolle, 330 mm method of taping / polarity and orientation packing unit 2000/reel, 180 mm or 8000/reel, 330 mm ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). ohay0583 6.1 (0.240) 2.8 (0.110) 2 (0.079) 3 (0.118) 6 (0.236) 3.5 (0.138) 1.5 (0.059) 2 (0.079) 3.5 (0.138) 1 (0.039) 8 (0.315) 2.8 (0.110) 0.5 (0.020) 7.5 (0.295) solder resist l ? tstoplack pcb-direction bewegungsrichtung der platine 2 (0.079) padgeometrie f ? r improved heat dissipation verbesserte w ? rmeableitung paddesign for 2 cu fl ? che / > 12 mm per pad cu-area ohay0093 4 (0.157) 2.9 (0.114) 1.5 (0.059) 4 (0.157) 3.6 (0.142) 3.5 (0.138) 2 (0.079) 1.75 (0.069) 8 (0.315) ca ac
2003-03-04 14 lsg t670, lsp t670, lsy t670, lop t670, lyg t670 published by osram opto semiconductors gmbh wernerwerkstrasse 2, d-93049 regensburg ? all rights reserved. attention please! the information describes the type of component and shall not be considered as assured characteristics. all typical data and graphs are basing on representative samples, but don t represent the production range. if requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. terms of delivery and rights to change design reserved. due to technical requirements components may contain dangerous substances. for information on the types in question please contact our sales organization. if printed or downloaded, please find the latest version in the internet. packing please use the recycling operators known to you. we can also help you get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of transport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or systems must be expressly authorized for such purpose! critical components 1 may only be used in life-support devices or systems 2 with the express written approval of osram os. 1 a critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health of the user may be endangered. revision history: 2003-03-04 date of change previous version: 2002-09-18 page subjects (major changes since last revision) 3 note changed 3 luminous intensity of lop t670 for pure green 5 dominant wavelength (yellow) 13 graphic (taping) 5 value (wavelength yellow) 14 annotations 2002-07-23 4, 5 value (reverse voltage from 5 v to 12 v) 2002-09-18

▲Up To Search▲

Price & Availability of LYGT670-LK

	To Download LYGT670-LK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .