cat.8100y aluminum electrolytic capacitors improved safety feature for abnormally excessive voltage. high ripple current product. compliant to the rohs directive (2002/95/ec). as series wide temperature range, miniature type permissible abnormal voltage please refer to page 20, 21, 22 about the formed or taped product spec. please refer to page 4 for the minimum order quantity. frequency coefficient of rated ripple current frequency coefficient 50, 60hz 120hz 300hz 1khz 10khz or more 0.80 1.00 1.25 1.40 1.60 category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current tangent of loss angle (tan ) stability at low temperature endurance shelf life safety performance marking printed with white color letter on dark brown sleeve. performance characteristics item 40 to +105 c 200v 33 to 330f 20% at 120hz, 20 c measurement frequency:120hz, temperature:20 c measurement frequency : 120hz after leaving capacitors under no load at 105 c for 1000 hours they shall meet the specified values for the endurance characteristics listed above. the pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case. after 1 minute's application of rated voltage, leakage current is 0.04cv+100 ( a) or less. the specifications listed at right shall be met when the capacitors are restored to 20 c after d.c. bias plus rated ripple current is applied for 2000 hours at 105 c , the peak voltage shall not exceed the rated voltage. specifications type numbering system (example : 200v 220 f) d p 10 5.0 d 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 u 1 a 2 s 3 2 4 d 5 2 6 2 7 1 8 m 9 h 10 d 11 12 configuration capacitance tolerance ( 20%) rated capacitance (220 f) rated voltage (200v) series name type size code in case l>25 for 12.5 (d) case sizes, lead diameter 0.8 (d) will be applied. d 10 pb-free leadwire pb-free pet sleeve pd 12.5 to 18 hd configuration (mm) l + 2 .0max. 15 min 4 min d + 0.5 max. sleeve (p.e.t.) d pressure relief vent p 0.5 radial lead type rated voltage (v) tan (max.) 200 0.15 z 25 c / z+20 c z 40 c / z+20 c rated voltage (v) impedance ratio zt / z20 (max.) 200 3 6 capacitance change leakage current tan within 20 % of the initial capacitance value less than or equal to the initial specified value 200 % or less than the initial specified value voltage (v) test conditions 200 limited dc current 4a (5a : 330 f) test voltage 300vdc and 375vdc rated ripple current (marms) at 105 c 120hz : in this case, 6 will be put at 12th digit of type numbering system. dimensions v cap.(f) 33 47 56 68 82 100 150 180 220 270 330 200 (2d) 10 10 20 10 25 160 195 12.5 12.5 20 12.5 20 12.5 25 12.5 25 12.5 31.5 195 210 320 360 430 16 16 20 16 25 16 31.5 430 460 600 18 18 20 18 25 18 31.5 18 35.5 18 40 460 600 710 890 910 330 470 560 680 820 101 151 181 221 271 331 code d case size d l (mm) rated ripple as aq smaller please refer to page 20 about the end seal configulation.
|
