spec no: dsaf1330 rev no: v.1 date: mar/29/2005 page: 1 of 5 approved: j. lu checked: allen liu drawn: b.h.li e rp: 1203000886 - 01 package dimension s 3.0x2.5mm surface mount led lam p features 3.0mmx2.5mm smt led, 1.4mm thickness. low power consumption. wide viewing angle. ideal for back light and indicator. various colors and lens types available. inner lens type package : 2000pcs / reel. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .2(0.008") unless otherwise noted. 3. specifications are subject to change without notice . description the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. the yellow source color devices are made with gallium arsenide phosphide on gallium phosphide yellow light emitting diode. apbl3025eyc - f01 high efficiency red yellow
spec no: dsaf1330 rev no: v.1 date: mar/29/2005 page: 2 of 5 approved: j. lu checked: allen liu drawn: b.h.li e rp: 1203000886 - 01 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 apbl3025eyc - f01 high efficiency red (gaasp/gap) water clear 7 20 yellow (gaasp/gap) 4 15 100 symbol parameter device typ. max. units test conditions peak peak wavelength high efficiency red yellow 627 590 nm i f =20ma d dominant wavelength high efficiency red yellow 625 588 nm i f =20ma ? 1/2 spectral line half - width high efficiency red yellow 45 35 nm i f =20ma c capacitance high efficiency red yellow 15 20 pf v f =0v;f=1mhz v f forward voltage high efficiency red yellow 2.0 2.1 2.5 2.5 v i f =20ma i r reverse current all 10 ua v r = 5v parameter high efficiency red yellow units power dissipation 105 105 mw dc forward current 30 30 ma peak forward current [1] 160 140 ma reverse voltage v operating/storage temperature - 40c to +85c 5
spec no: dsaf1330 rev no: v.1 date: mar/29/2005 page: 3 of 5 approved: j. lu checked: allen liu drawn: b.h.li e rp: 1203000886 - 01 apbl3025eyc - f01 high efficiency red
spec no: dsaf1330 rev no: v.1 date: mar/29/2005 page: 4 of 5 approved: j. lu checked: allen liu drawn: b.h.li e rp: 1203000886 - 01 yellow
spec no: dsaf1330 rev no: v.1 date: mar/29/2005 page: 5 of 5 approved: j. lu checked: allen liu drawn: b.h.li e rp: 1203000886 - 01 recommended soldering pattern (units : mm ) tape specifications (units : mm ) apbl3025eyc - f01 remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
