spec no: dsae7188 rev no: v.7 date: dec/18/2010 page: 1 of 5 approved: wynec checked: allen liu drawn: y.h.wu er p: 1102013061 t-1 (3mm) right angle led indicator part number: l-7104zh/1yd yellow features z pre-trimmed leads for pc board mounting. z black case enhances contrast ratio. z wide viewing angle. z high reliability life measured in years. z housing ul rating:94v-0. z housing material: type 66 nylon. z rohs compliant. description the yellow source color devices are made with gallium arsenide phosphide on galliu m phosphide yellow light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice .
spec no: dsae7188 rev no: v.7 date: dec/18/2010 page: 2 of 5 approved: wynec checked: allen liu drawn: y.h.wu er p: 1102013061 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3. 5mm below package base. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 l-7104zh/1yd yellow (gaasp/gap) yellow diffused 8 15 40 iv (mcd) [2] @ 10ma symbol parameter device typ. max. units test conditions peak peak wavelength yellow 590 nm i f =20ma d [1] dominant wavelength yellow 588 nm i f =20ma ? 1/2 spectral line half-width yellow 35 nm i f =20ma c capacitance yellow 20 pf v f =0v;f=1mhz v f [2] forward voltage yellow 2.1 2.5 v i f =20ma i r reverse current yellow 10 ua v r = 5v parameter yellow units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 140 ma reverse voltage 5 v operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds
spec no: dsae7188 rev no: v.7 date: dec/18/2010 page: 3 of 5 approved: wynec checked: allen liu drawn: y.h.wu er p: 1102013061 yellow l-7104zh/1yd
spec no: dsae7188 rev no: v.7 date: dec/18/2010 page: 4 of 5 approved: wynec checked: allen liu drawn: y.h.wu er p: 1102013061 packing & label specifications l-7104zh/1yd
spec no: dsae7188 rev no: v.7 date: dec/18/2010 page: 5 of 5 approved: wynec checked: allen liu drawn: y.h.wu er p: 1102013061
|
