dimensions are shown in mm (inch) dimensions subject to change 159 d subminiature military/high reliability 40 a high power straight pcb (sizes de-dc) part numbers with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks de 5w1 demmv5h1sn demmz5h1sn demmn5h1sn da 7w2 dammv7h2sn dammz7h2sn dammn7h2sn da 11w1 dammv11h1sn dammz11h1sn dammn11h1sn da 3w3 dammv3h3sn dammz3h3sn dammn3h3sn da 3wk3 DAMMV3HK3SNTM dammz3hk3sntm dammn3hk3sntm db 5w5 dbmmv5h5sn dbmmz5h5sn dbmmn5h5sn db 9w4 dbmmv9h4sn dbmmz9h4sn dbmmn9h4sn db 13w3 dbmmv13h3sn dbmmz13h3sn dbmmn13h3sn db 17w2 dbmmv17h2sn dbmmz17h2sn dbmmn17h2sn db 21w1 dbmmv21h1sn dbmmz21h1sn dbmmn21h1sn dc 8w8 dcmmv8h8sn dcmmz8h8sn dcmmn8h8sn dc 13w6 dcmmv13h6sn dcmmz13h6sn dcmmn13h6sn dc 17w5 dcmmv17h5sn dcmmz17h5sn dcmmn17h5sn dc 21wa4 dcmmv21ha4sn dcmmz21ha4sn dcmmn21ha4sn dc 25w3 dcmmv25h3sn dcmmz25h3sn dcmmn25h3sn dc 27w2 dcmmv27h2sn dcmmz27h2sn dcmmn27h2sn notes: for dd shell sizes, see page 161. keyed. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) receptacle engaging face screw lock, boardlock and high power contact removed for clarity a c b d e 10 4,65 (.183) 7,62 0,25 (.300 .010) 6,50 0,25 (.256 .010) 3,18 (.125) 0,76 (.030) 2,92 (.115) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 2,84 (.112) l f w reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 257-258. for panel cutouts, see page 221. for hardware views (standard), see page 226.
|
