connectors for pc card for pcb right-angle smt conforming to pcmcia/jeita right-angle smt type 15-contacts male board connector rmc-ea15my-om( )-m( )( )( ) mating connectors : refer to the table shown components ? contacts ? insulator ? shell ? locking hardware ? hold down locations of polarization keys rmc-ea15my-om15-m ( ) rmc-ea15my-om15-m ( ) 1 rmc-ea15my-om15-m ( ) 2 rmc-ea15my-om15-m ( ) 3 part no. mating connectors a a1 a2 a3 identification examples - 1 2 3 key location 123 20 1.5 2.8 2 2.9 2.7 ref. 9.7ref. 0.2 0.8 7 pcb layout for reference only for om15 connectors off-set pcb layout for reference only for other than om15 connectors 0.8(15-1)=11.2 0.8 0.814=11.2 - + 0.15 0.3 off-set honda japan a2 115 ? ? ? 17.9 - + 0.2 2-r0.3 contact pos. no. ? ? recommended pcb thickness: t = 0.5 mm. however, t = 0.4 when using connectors with off-set of 0.9 mm (om09). connectors with off-set of 1.5 mm (om15) are recommended for small sized applications such as mobile computers. note: this is not an i/o connector for pc card. this is a similar type connector to rmc-e15my type connector, with high accuracy of smt coplanarity because the contacts are fo rm ed together with the insulator as one piece. this model is av ailable with various offsets. some models may not be quickly supplied depending on the contiguration of part number (key position and off-set dimension). f or the availability of the model required, consult your supplier. 23 ref. 18.66 ref. r1 ref. 10 5 3-?.6 2.03 - + 0.1 4.03 ref. 2.35 ref. 2 1.2 3 4.2 ref. 6.2 ref. 1.45 - + 0.2 6.7 ref. 0.8(15-1)=11.2 0.1 0.5 ref. 2 0.8 - + 0.05 15.1 0.1 2.4 - + 0.1 edge of pcb : pad : pad configuration of product part no. rmc -ea 15 my - om( ) m ( ) ( ) ???? ???? ( ) ? ? series name ? ea: contact, hold down, locking hardware, one-piece molded, emi-filtered ? no. of contacts: 15 ? my: smt type male ? off-set om00: off-set 0 mm, om02: off-set 0.2 mm om03: off-set 0.3 mm, om06: off-set 0.6 mm om09: off-set 0.9 mm, om15: off-set 1.5 mm ? m: one-piece molded key ? fo rm of polarization keys ? locations of polarization keys blank: key-less, 1: 1, 2: 2, 3: 3 a: a type, b: b type ? insulator colors applicable only to models with the mb fo rm of key(for the models with other key forms, these insulator colors are all b lack.) blank:brown (standard) bk :black for ms of keys a type lan modem b type * typical use is shown here. these types may also be applicable to other uses. use* rmc-e15f4s-lc5 ( ) -m ( )( ) rmc-e15f4s-lc5( )-m( )23 rmc-e15f4s-lc5( )-m( )13 rmc-e15f4s-lc5( )-m( )12 rmc-e(b)15fb-bsl ( ) -m ( )( ) rmc-e(b)15fb-bsl ( ) -m ( ) 23 rmc-e(b)15fb-bsl ( ) -m ( ) 13 rmc-e(b)15fb-bsl ( ) -m ( ) 12 23 ref. 18.66 ref. 17.07 2.03 0.1 4.03 ref. 4.2 ref. 6.2 ref. 1.45 0.2 6.7 ref. 0.8(15-1)=11.2 0.1 0.5 ref. 0.8 0.05 15.1 0.1 2.4 0.1 pos.#15 pos.#1 others wire wrapping crimping soldering idc press-in smt dip
|
