schurter, inc. ? phone 707-778-6311 ? fax 707-778-6401 ? e-mail 73024.2314@compuserve.com ? website http://www.schurterinc.com 12 snap fit - screw fit ? for cold connections 65?c, protection class i or ii ? pcb mount with snap-in or screw-on feet (self-tapping screws provided) ? panel mount from rear or sandwich between top and bottom panels for optimum stability (see page 10 for further information) ? ground terminal solder / quick-connect 4.8 x 0.8mm or 6.3 x 0.8mm; positioned for access from top or back of connector ? optional insulation cover for protection against electrical contact ? material: thermoplastic, polyamid 6.6 (ul 94v-o) terminals: brass, tin and nickel-plated ul recognition 15a/250v file #e96454 csa certification 15a/250v file #lr38456 vde approval 10a/250v file #73753 semko approval 10a/250v sev approval 10a/250v file numbers on request screw-on d1 = 6 0.05 for snap fit d1 = 3.6 for screw fit screw fit snap fit with insulation cover rear panel mounting split panel mounting standards: en60320; iec 320 / c14 snap-in complete multi fit family on page 10 ac inlets for pcb mounting C snap-in or screw-on *standard configuration. contact schurter for non-standard order minimums. ** for additional insulation cover (spare part only), use order number 0098.0077 basic specification gsp2* = appliance connector for mounting on pcb terminal spacing 0 = no pcb terminals 1 = type spacings 7/9.7mm 2 = type spacings 9.05/7.3mm 3* = type spacings 9.05/9.7mm 4* = type spacings 7/7.3mm printed circuit board mounting 0* = with 3mm self-tapping screws (screws not included) 1* = with 3mm self-tapping screws (2 screws included) 2* = with snap-in feet for pcb 1.6mm 3 = with snap-in feet for pcb 1mm 4 = with snap-in feet for pcb 1.2mm 5 = with snap-in feet for pcb 1.5mm 6 = with snap-in feet for pcb 2mm 7 = with snap-in feet for pcb 2.4mm 8 = with snap-in feet for pcb 3.2mm insulation cover 0* = without insulation cover 1* = black insulation cover, mounted ** 2 = black insulation cover included (separate) ** ground terminal 0 = protection class ii, without ground terminal 1* = protection class i, solder/quick connect 4.8 x 0.8mm, 90? to connector axis 2 = same as 1, but not connected with pcb 3* = protection class i, solder/quick connect terminal 4.8 x 0.8mm, in connector axis 4 = same as 3, but not connected with pcb 5 = protection class i, solder/quick connect terminal 6.3 x 0.8mm, 90? to connector axis 6 = same as 5, but not connected with pcb 7 = protection class i, solder/quick connect terminal 6.3 x 0.8mm, in connector axis 8 = same as 7, but not connected with pcb a = protection class i, solder terminals, no pcb terminals b = protection class i, quick connect terminals 4.8 x 0.8mm, no pcb terminals c = protection class i, solder terminals, 90? to the connector axis d = same as c, but not connected with pcb e = protection class i, solder terminals, in connector axis f = same as e, but not connected with pcb color of housing 1* = black 2 = grey panel mounting 1 = 1.0mm panel thickness 2 = 1.2mm panel thickness 3* = 1.5mm panel thickness 4 = 2.0mm panel thickness 5 = 2.5mm panel thickness 6 = 3.0mm panel thickness gsp 2 . x x x x . x x order numbers: new
|