u.s. cage code 06324 ipt series bayonet lock connectors www.glenair.com e-mail: sales@glenair.com b-60 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. ipt 02 pp rear box mount square flange receptacle through bulkhead application notes 1. through bulkhead receptacle with solid feedthrough contacts. rear box mount square fange version. 2. threaded mount holes. 3. standard materials confguration consists of aluminum alloy with stainless steel coupling pins. 4. standard contact material consists of copper alloy with gold plating over nickel. 5. standard insert is high insulation synthetic rubber. ipt 02 pp 18-11 p/s z xx mil-c-26482 series l type 02 - rear box mount square flange receptacle pp - thru-bulkhead shell size and insert arrangements mod code options see table ii alternate insert rotation (w, x, y, z) omit for normal solid contact gender p/p - pin/pin s/s - socket/socket p/s - pin/socket g h m
u.s. cage code 06324 ipt series bayonet lock connectors www.glenair.com e-mail: sales@glenair.com b-61 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. table i: dimensions shell size a +0.2 -0 c 0.1 l +0.2 -0 g 0.4 h 0.1 m 0.12 8 14.5 1.6 26.5 20.6 15.10 3.04 10 14.5 1.6 26.5 23.8 18.25 3.04 12 14.5 1.6 26.5 26.2 20.60 3.04 14 14.5 1.6 26.5 28.6 23.00 3.04 16 14.5 1.6 26.5 31.0 24.60 3.04 18 14.5 1.6 26.5 33.3 27.00 3.04 20 17.8 2.5 33.5 36.5 29.35 3.04 22 17.8 2.5 33.5 39.7 31.75 3.04 24 17.8 2.5 33.5 42.9 34.90 3.73 ipt 02 pp rear box mount square flange receptacle through bulkhead table ii: modification codes shell finish (omit for standard cad/olive drab finish) assembly with accessories (omit for standard version) f2 - bright nickel plating (rohs) key polarization (omit for n version) w, x, y, z = alternates f6 - black electrodeposited paint (rohs) nxxx - custom designed connector f7 - black zn-co plating (rohs) f8 - olive drab zn-co plating standard finishes (for qq-a-591 aluminum shells) requirements iaw rohs not iaw rohs f2 electrolytic nickel f6 black non conductive f7 black conductive g3 cadmium with olive drab passivation f8 zinc cobalt with olive drab passivation thermal shock -40c + 100c -55c + 125c -55c + 125c -55c + 125c -40c + 100c salt spray after thermal shock 24 hour 500 hour 500 hour 500 hour 200 hour electical conductivity very good no very good very good good abrasion resistance very good very good good very good good
|
