View GT5P-1PP-HU_3833477.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

27 gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines coaxial cable connection of antennas, sensors, and communication trunk lines te rmination of coaxial cables in automotive, medical and instrumentation applications utilizes a single motion to crimp the center conductor, shield and outer insulation. gt5 series ?connectors for coaxial cables < several types and configurations: in-line, board mounted, combinations of coaxial cable with signal/power, multi-position and color/ keying variations. > features uscar standard titled "square outer conductor (sae/uscar-19)" excludes water proof type (gt5w) cost efficient termination highly efficient and reliable single motion "twin crimp tm " termination allows high volume production with semi-automatic equipment. space-saving design lock-release latching system shock / vibration resistant electrical connections verification of the full contact insertion color and polarizing variations excellent high frequency performance refer to v.s.w.r. data on the following pages. applications in-car communication, car sensors (temperature, pressure), automotive audio systems, gps antenna systems, racs antenna audio/video antenna systems, crt displays, medical and measuring instrumentation, variety of communication equipment, office automation equipment, lan systems. * "twin crimp "is a registered trade mark of hirose electric. sae/uscar-19 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
28 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines b t est data (using 1.5d-2v type cable) b t ermination sequence 3.5 9.5 5 2. crimp the cable to the terminal. 4. fully insert the retainer. 3. insert the terminal in the housing until is fully locked. 1. strip the cable. high frequency characteristics (v.s.w.r.) note: typical data using fully assemblied and connected gt5-1s-hu and the gt5-1pp-hu. 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1 1.0 2.0 3.0gh z the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
23.05 5.8 5.8 5.8 5.8 23.05 5.8 4.6 4.6 21.7 29 gt5 series gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines t erminals for coaxial shielded cable f connector terminals * * * * * * * gt5-30/0.7-1.5scf gt5-2428/1.6-2.5scf gt5-30/1.6-2.9scf gt5-2428/1.6-2.9scf gt5-2022/1.6-2.9scf gt5-2022/f2.7-3.5scf gt5-2022/f3.3-3.8scf gt5-30/3.3-5scf gt5-2428/f3.3-5scf gt5-2022/f3.3-5scf gt5-30/f4-5scf gt5-2428/f4-5scf gt5-2022/f4-5scf 755-0065-1 755-0078-3 755-0022-9 755-0002-1 755-0071-4 755-0077-0 755-0054-5 755-0016-6 755-0012-5 755-0034-8 755-0020-3 755-0024-4 755-0036-3 #30 or equivalent #30 or equivalent #24 to 28 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent #20 to 22 or equivalent #20 to 22 or equivalent #30 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent #30 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent part number cl no. inner insulation diameter 0.6 to 0.9mm 1.5 to 2.0mm 1.5 to 2.0mm 2.4 to 2.9mm 2.5 to 2.9mm 2.5 to 2.9mm 3.0 to 3.6mm 1.4 to 1.8mm 2.3 to 2.7mm 2.6 to 3.4mm 3.3 to 3.7mm 3.6 to 4.0mm 4.6 to 5.0mm 4.6 to 5.0mm 1,300 pcs. per reel 1,300 pcs. per reel 1,300 pcs. per reel 1,100 pcs. per reel 1,100 pcs. per reel 1,100 pcs. per reel 1,100 pcs. per reel outer diameter packaging conductor size (awg) note: products marked with an asterisk (*) indicate polyethylene foam insulation. part insulator crimp terminals outer terminals material pbt phosphor bronze brass finish color: dark gray tin plating tin plating * * * * * * * gt5-30/0.7-1.5pcf gt5-30/1.6-2.9pcf gt5-2428/1.6-2.9pcf gt5-2022/1.6-2.9pcf gt5-2022/f2.7-3.5pcf gt5-2022/f3.3-3.8pcf gt5-30/f3.3-5pcf gt5-2428/f3.3-5pcf gt5-2022/f3.3-5pcf gt5-30/f4-5pcf gt5-2428/f4-5pcf gt5-2022/f4-5pcf 755-0017-9 755-0021-6 755-0001-9 755-0094-0 755-0076-8 755-0053-2 755-0015-3 755-0011-2 755-0033-5 755-0019-4 755-0023-1 755-0035-0 #30 or equivalent #30 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent #20 to 22 or equivalent #20 to 22 or equivalent #30 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent #30 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent part number cl no. inner insulation diameter 0.6 to 0.9mm 1.5 to 2.0mm 2.4 to 2.9mm 2.5 to 2.9mm 2.5 to 2.9mm 3.0 to 3.6mm 1.4 to 1.8mm 2.6 to 3.4mm 3.3 to 3.7mm 3.6 to 4.0mm 4.6 to 5.0mm 4.6 to 5.0mm 900 pcs. per reel 900 pcs. per reel 900 pcs. per reel 900 pcs. per reel 900 pcs. per reel 900 pcs. per reel outer diameter packaging conductor size (awg) note: products marked with an asterisk (*) indicate polyethylene foam insulation. part insulator crimp terminals outer terminals material pbt brass brass finish color: dark gray tin plating tin plating m connector terminals low-insertion m connector terminals part insulator crimp terminals outer terminals material pbt brass brass finish color: dark gray tin plating tin plating gt5l-30/0.7-1.5pcf gt5l-30/1.6-2.9pcf gt5l-2428/1.6-2.9pcf gt5l-2428/1.6-2.5pcf 755-0068-0 755-0067-7 755-0066-4 755-0079-6 #30 or equivalent #30 or equivalent #24 to 28 or equivalent #24 to 28 or equivalent part number hrs no. inner insulation diameter 0.6 to 0.9mm 1.5 to 2.0mm 1.4 to 1.8mm 2.6 to 3.4mm 900 pcs. per reel 900 pcs. per reel outer diameter packaging conductor size (awg) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
30 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines 9.6 13 11.1 25 f connectors for single-conductor coaxial shielded cable housings 14.8 7.85 2.8 25 9.6 11.1 13 1.2 gt5r-1s/ hu gt5-1s-hu terminal extraction tool: gt-po(a), note 1: concept only retainer (-optional-used with the housings: gt5-1s-hu, gt5-1pp-hu, gt5n-1pp-hu, gt5h-1pp-hu) housing (not requiring use of the retainer) part number gt5-1p/s-r cl no. material color 755-0006-2 pbt dark gray part number gt5r-1s-hu cl no. material color 755-0047-0 pbt light gray terminal extraction tool: gt-po(a) (26.35) retainer gt5-1s-hu gt5-1s-hu(a) gt5-1s-hu(b) gt5-1s-hu(c) gt5-1s-hu(d) gt5-1s-hu(e) gt5-1s-hu( i ) gt5-1s-hu(j) gt5-1s-hu(k) 755-0004-7 755-0037-6 755-0038-9 755-0080-5 755-0081-8 755-0082-0 note 1 note 1 note 1 light gray brown green blue purple pink black cream white pastel orange figure q figure w figure e figure r figure t figure y figure u figure i figure o gt5-1pp-hu gt5-1pp-hu(a) gt5-1pp-hu(b) gt5-1pp-hu(c) gt5-1pp-hu(d) gt5-1pp-hu(e) gt5-1pp-hu( i ) gt5-1pp-hu(j) gt5-1pp-hu(k) gt5-1p-ds gt5-1p-ds(a) gt5-1p-ds(b) gt5-1p-ds(c) gt5-1p-ds(d) gt5-1p-ds(e) gt5-1p-ds( i ) gt5-1p-ds(j) gt5-1p-ds(k) part number cl no. material color key polarizing code corresponding m connector housing- in-line corresponding m connector assembly- board mounting - a b c d e i j k uscar-19 coding pbt b shown with inserted retainer. figure q figure w figure e figure r figure t figure y figure u figure i figure o keying configurations the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
12.2 9.2 6.8 30 25 17 13.5 9.95 15.9 3 0.6 14.3 11.8 13.4 9.85 0.8 30 25 31 gt5 series gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines part housing ground terminal material pbt phosphor bronze finish color: dark gray tin plating housings 14.8 13.4 outside ground connection mounting bracket attachment side 30 (41.4) (11.4) 20.25 (1.35) (1.35) gt5h-1pp-hu gt5-1p/s-r gt5-1s-hu gt5-1p/s-r (41.4 ) 30 (11.4 ) (1.35 ) (1.35 ) gt5n-1pp-hu gt5-1p/s-r gt5-1s-hu gt5-1p/s-r figure q figure w figure e figure r figure t figure y figure u figure i figure o m connectors gt5-1pp-hu gt5-1pp-hu(a) gt5-1pp-hu(b) gt5-1pp-hu(c) gt5-1pp-hu(d) gt5-1pp-hu(e) gt5-1pp-hu( i ) gt5-1pp-hu(j) gt5-1pp-hu(k) 755-0005-0 755-0039-1 755-0040-0 755-0103-9 755-0104-1 755-0105-4 note 1 note 1 note 1 light gray brown green blue purple pink black cream white pastel orange figure q figure w figure e figure r figure t figure y figure u figure i figure o - a b c d e i j k part number cl no. corresponding f connector housing color key polarizing code uscar-19 coding * refer to pages 32 and 34 for panel brackets used with in-line connectors. * terminal extraction tool: gt-po(a) note 1: concept only gt5-1s-hu gt5-1s-hu(a) gt5-1s-hu(b) gt5-1s-hu(c) gt5-1s-hu(d) gt5-1s-hu(e) gt5-1s-hu( i ) gt5-1s-hu(j) gt5-1s-hu(k) housings (for use with h type mounting bracket) housing (for use with n type mounting bracket) b fully mated connector assemblies. b fully mated connector assemblies. part number gt5h-1pp-hu (10) gt5h-1pp-hu (41) cl no. 755-0093-7 10 755-0093-7 41 color corresponding f connector housing light gray blue gt5-1s-hu gt5r-1s-hu part number gt5n-1pp-hu cl no. 755-0090-9 color corresponding f connector housing light gray gt5-1s-hu gt5r-1s-hu b keying configurations (31.35) retainer b shown with inserted retainer. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
15 12.4 9.95 11.8 13 4 14 11.15 13.4 30 9.5 7 6.2 15 12.4 9.95 11.8 26 13.4 14 11.15 30 19 7 6.2 11.6 5.8 19 10.4 m3 30 15 gt5-1p/s-r gt5-1s-hu m3 panel thickness:1.6 32 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines housings panel mounting, enhanced shielding configuration part number gt5a-1pp-hu cl no. 755-0025-7 part material finish housing ground terminal pbt brass color: light gray tin plating [] b recommended panel cut-out b mounted and fully mated connector assemblies note 1: terminal extraction tool: gt-po(a) note 2: retainer is optional. note 3: use jis b 1111 and 1101 m3 screws for the mounting screws. part number GT5P-1PP-HU cl no. 755-0030-7 part material finish housing ground terminal pbt brass color: light gray tin plating note 1: terminal extraction tool: gt-po(a) note 2: retainer is optional. note 3: use jis b 1111 and 1101 m3 screws for the mounting screws. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
7 8.1 assembly diagram (1:1) 4 3.2 13.4 11.15 14 3.6 2.6 27.4 12.3 gt5-1s-hu gt5-1p/s-r chassis 30 12.65 11.8 12.8 19 26 12.65 3.2 30 11.8 16.8 19 26 2.6 1.2 1.2 11.15 5 13.4 15.9 7 8.1 5 assembly diagram(1:1) 27.4 12.3 1 gt5-1s-hu gt5-1p/s-r chassis 33 gt5 series gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines part number gt5b-1pp-hu cl no. 755-0051-7 part material finish housing ground terminal pbt copper alloy color: light gray tin plating note 1: terminal extraction tool: gt-po(a) with nominal diameter 3l-6 (for a board thickness of 1.6 mm). note 2: retainer is optional. note 3: use jis b 1115 and 1122 class 4, nominal diameter 3, length 6 screws for the mounting screws. part number gt5s-1pp-hu cl no. 755-0050-4 part material finish housing ground terminal pbt copper alloy color: light gray tin plating note 1: terminal extraction tool: gt-po(a) with nominal diameter 3l-6 (for a board thickness of 1.6 mm). note 2: retainer is optional. note 3: use jis b 1115 and 1122 class 4, nominal diameter 3, length 6 screws for the mounting screws. b mounted and fully mated connector assemblies b mounted and fully mated connector assemblies the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
34 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines 20.4 15.4 21.3 21.3 gt5-1 gt5-1p/s-r note gt5-1p-ds t=1.6 15.4 7.7 outlines connector assembly, printed circuit board mounting type 11.8 13.9 3 11.8 12.8 13.9 4 3 11.8 12.8 13.9 4 3 12.8 figure q figure w figure e gt5-1p-ds gt5-1p-ds(a) gt5-1p-ds(b) gt5-1p-ds(c) gt5-1p-ds(d) gt5-1p-ds(e) gt5-1p-ds( i ) gt5-1p-ds(j) gt5-1p-ds(k) 755-0007-5 755-0041-3 755-0042-6 755-0083-3 755-0084-6 755-0085-9 note 2 note 2 note 2 figure q figure w figure e figure r figure t figure y figure u figure i figure o gt5-1p-ds gt5-1p-ds(a) gt5-1p-ds(b) gt5-1p-ds(c) gt5-1p-ds(d) gt5-1p-ds(e) gt5-1p-ds( i ) gt5-1p-ds(j) gt5-1p-ds(k) gt5-1s-hu gt5-1s-hu(a) gt5-1s-hu(b) gt5-1s-hu(c) gt5-1s-hu(d) gt5-1s-hu(e) gt5-1s-hu( i ) gt5-1s-hu(j) gt5-1s-hu(k) part number cl no. color key polarizing code m connector-board type corresponding f connector housing note: use jis b 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board thickness of 1.6 mm) for the mounting screws. * eight types of keys are available. please use a mating f connector housing of a matching key type. light gray brown green blue purple pink black cream white pastel orange part housing 0.65 x 1.1 terminals insulator outer terminals material pbt brass pbt phosphor bronze finish - tin plating dark gray tin plating b recommended pcb mounting pattern b diagram of mated connector in use 12.8 figure r figure t figure y figure u figure i figure o 12.8 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
note 1: used with separate retainer (gt5-2p/s-r). note 2: please use a mating f connector of a matching key type. note 3: terminal extraction tool: gt-po(a) 35 gt5 series gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines f connectors t wo-position type-each single-conductor coaxial cable 16.6 25 13.3 11.5 0.4 1.2 figure q figure w figure e figure r gt5-2p/s-r 25 41.4 cav no 30 25 1.2 21.8 more than 4.75 17.75 5 2.8 1 1.52 0.6 tin plating 14.5 8 5 1.3 1.5 4.2 7.8 9.8 6.8 1.6 gt5-2p/s-r gt5-2s-hu gt5-2p/s-r housings gt5-2s-hu gt5-2s-hu(a) gt5-2s-hu(b) gt5-2s-hu(c) 755-0044-1 755-0059-9 755-0060-8 755-0097-8 figure q figure w figure e figure r d2 a2 b2 c2 part number cl no. color key polarizing code uscar-19 coding light gray brown green blue material pbt shown with inserted retainer. m connectors housings [ panel mounted housing ] figure q figure w figure e figure r gt5-2pp-hu gt5-2pp-hu(a) gt5-2pp-hu(b) gt5-2pp-hu(c) 755-0045-4 755-0063-6 755-0064-9 755-0099-3 part number cl no. key polarizing code note: used with separate retainer (gt5-2p/s-r). coding d2 at uscar-19 is gt5-2pp-hu. figure q figure w figure e figure r color light gray brown green blue b recommended mounting bracket dimensions. b fully mated connector assemblies part housing ground terminal material pbt phosphor bronze finish - tin plating b keying configurations b keying configurations the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
cav no 14.8 10.9 2.8 30 25 18.8 13.4 15.8 22.4 14.15 4 18.8 27.4 7.7 7 21.3 5.45 36 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines 22.4 panel 2- for inner conductor for outer conductor 41.4 gt5-2s-hu gt5-2p/s-r gt5-2p/s-r 14.05 0.3 2-r0.7 2-r3.25 19.2 22.4 board 8.2 3.6 14.05 0.3 2-r0.7 2-r3.25 board 19.2 20.2 22 1.5 3.6 2-r0.7 14.05 0.3 r3.25 board r2.3 20.2 19.2 8.2 11.8 14.05 0.3 2-r3.25 3 2-r0.7 20.2 19.2 3 3 3 figure q figure w figure e figure r gt5-2p-ds (d) recommended panel cut-out gt5-2p-ds (a) gt5-2p-ds (b) gt5-2p-ds (c) housing retainer ?2 position (used with gt5-2s-hu, gt5-2pp-hu, and gt5n-2pp-hu) housings gt5n-2pp-hu 755-0055-8 part number cl no. color note 1: terminal extraction tool: gt-po(a) note 2: used with separate retainer (gt5-2p/s-r). light gray material pbt b diagram of mated connector in use gt5-2p/s-r 755-0046-7 part number cl no. color dark gray material pbt gt5-2p-ds gt5-2p-ds(a) gt5-2p-ds(b) gt5-2p-ds(c) 755-0043-9 755-0061-0 755-0062-3 755-0101-3 figure q figure w figure e figure r d2 a2 b2 c2 part number cl no. color key polarizing code uscar-19 coding note: use jis b 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board thickness of 1.6 mm) for the mounting screws. coding d2 at uscar-19 is gt5-2p-ds. light gray brown green blue material pbt b recommended board mounting pattern b mounted and fully mated connector assemblies b keying configurations the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
37 gt5 series gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines power supply terminals f connector terminals m connector terminals 2.3 2.8 19 2.8 1.9 2.7 20.7 gt7-2022scf gt7a-2022scf 757-0001-1 757-0003-7 #20 to 22 #20 to 22 part number cl no. 5,000 3,000 material finish conductor size (awg) outer diameter packaging note 1: sold by the reel. (see above table for number of packaging.) note 2: this component is used only with applicable hrs housings. copper alloy tin plating 1.4 to 2.4mm 2.6 to 3.1mm gt7-2022pcf gt7a-2022pcf 757-0002-4 757-0004-0 part number cl no. 5,000 3,000 material finish outer diameter packaging note 1: sold by the reel. (see above table for number of packaging.) note 2: this component is used only with applicable hrs housings. brass tin plating 1.4 to 2.4mm 2.6 to 3.1mm ( for use with combination type assemblies: gt5-2/1s-hu, gt5-2/1p-ds, gt5-2/1pp-hu, gt5n-2/1pp-hu) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
21.1 25 12.5 10.8 retainer 38 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines combinaton type (two single-conductor coaxial cables + one power contact) f connectors 17.28 16.6 2.8 housing note 1: terminal extraction tool: gt-po(a) note 2: used with separate retainer (gt5-2/1s-r). b shown with inserted retainer. retainer (exclusively for gt5-2/1s-hu) gt5-2/1s-r 755-0003-4 part number cl no. color dark gray material pbt m connectors connector assembly, printed circuit board mounting 31.9 26.9 21.3 23.3 13.4 gt5-2/1p-ds 755-0014-0 part number cl no. note: use jis b 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board thickness of 1.6 mm) for the mounting screws. housing 0. 64x1.1 terminal insulator outer terminal tub terminal for ds 070 pbt brass pbt phosphor bronze brass color: light gray tin plating dark gray tin plating tin plating part material finish for inner conductor thickness : 1.6mm for outside conductor for power supply b recommended board mounting pattern 26.9 23.7 4-r3.25 board 13.3 0.3 b recommended panel cut-out gt5-2/1s-hu 755-0009-0 part number cl no. color light gray material pbt the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
15.8 30 25 13.4 23.3 39 gt5 series gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines m connectors gt5-2 / 1pp-r 15.36 16.6 3.5 30 26.3 13.4 mounting bracket attachment side outside ground connection retainer 1.52 0.6 1 1.6 6.8 4.2 7.8 17.75 1.5 4.75min. 5 5 8 2.8 14.5 9.8 tin plating finish housing - with external ground b shown with inserted retainer. part number gt5n-2/1pp-hu cl no. 755-0013-8 material color pbt light gray note 1: terminal extraction tool: gt-po(a) note 2: used with separate retainer gt5-2/1pp-r. retainer (used with gt5n-2/1pp-hu and gt5-2/1pp-hu) part number gt5-2/1pp-r cl no. 755-0010-0 material color pbt dark gray b recommended mounting bracket dimensions housing - without external ground part number gt5-2/1pp-hu cl no. 755-0008-8 part material finish housing ground terminal pbt phosphor bronze color: light gray tin plating note 1: terminal extraction tool: gt-po(a) note 2: used with separate retainer (gt5-2/1pp-r ). the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
14.8 27.6 2.8 35.8 31.9 9.2 3 1.2 30 21.5 14.6 13.8 16.2 31.9 8.5 33.6 31.9 12.5 11.5 25 40 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines f connector gt5-4p/s-r part number gt5-4s-hu cl no. 755-0056-0 material color uscar-19 coding pbt light gray d4 note: used with separate retainer (gt5-4p/s-r). m connector part number gt5n-4pp-hu cl no. 755-0057-3 material color uscar-19 coding pbt light gray d4 note 1: the product should be used with a low-force insertion/withdrawal m connector terminal. note 2: used with separate retainer gt5-4p/s-r. retainer (used with gt5-4s-hu and gt5n-4pp-hu) part number gt5-4p/s-r cl no. 755-0058-6 material color pbt dark gray 4-position ?single conductor coaxial cable b shown with inserted retainer. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
12.6 lot no. 35.8 40.8 45.8 24 10 5.25 cav no pin no 10.6 3 4 0.5 3 14.3 15.1 21.3 41 gt5 series gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines m connector panel outline for outer conductors for inner conductors 36.2 14.2 0.3 pcb board outline 2-r3 2-r0.5 21.3 panel m3 screw board b recommended board mounting pattern b recommended panel cut-out b mounted and fully mated connector assemblies gt5-4p-ds 755-0087-4 d4 part number cl no. uscar-19 coding connector assembly, printed circuit board mounting housing 0.64 ? 1.1terminal insulator outside tube terminal pbt brass pbt phosphor bronze light gray tin plating dark gray tin plating item material color / finish the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
15.4 15.9 8.7 16.6 18.65 36 42 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines single conductor coaxial cable - waterproof type f connector housing part number gt5w-1s-hu cl no. 755-0027-2 materia l color pbt light gray note: specific retainer is determined by the type of the cable used. note: outer diameter of the cable must be within 2.9 to 3.4 mm. consult nearest hrs representative for other diameters. retainer (used with gt5w-1p-hu, gt5jw-1pp-hu, gt5w-1s-hu and gt5w-1p-hu) part number gt5w-1p/s-r cl no. 755-0028-5 materia l color pbt silicon rubber compound dark gray dark gray the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
34 18.4 18.2 43 gt5 series gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines m connectors housing part number gt5w-1p-hu cl no. 755-0026-0 part material color housing connector seal pbt silicon rubber light gray white note: use correct retainer. b mounted and fully mated connector assemblies b recommended bracket dimensions housings - bracket mounting gt5w-1pp-hu gt5jw-1pp-hu 755-0070-1 755-0069-2 part number cl no. b 1.3 3.0 a 1.5 3.2 part housing connector seal material pbt silicon rubber compound color light gray white the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
44 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines g terminals for direct coaxial cable termination 14.6 10.8 2.5 6.3 9.3 0.4 1 3 6.9 1.5d-2v or equivalent 3.5 2 7 r1 1.9 part number gtb-1.6cf cl no. 755-0049-5 material finish packaging brass tin plating 1,500 pcs. per reel 3.5 1.5d-2v or equivalent 3.5 heat-shrink tubing pre-solder 3.5 part number g-1.6pcf cl no. 755-0029-8 material finish packaging brass tin plating 1,500 pcs. per reel 6.3 6.9 3 2 0.4 10.6 7 1.9 r1 1.5d-2v or equivalent heat-shrink tubing 7 2 3.5 1.2 2.3 2.9 lands b board termination pattern b completed termination cross section b board termination pattern b completed termination cross section b board termination pattern b completed termination cross section 0.6 1.2 2.3 2.8 lands part number gta-1.6cf cl no. 755-0032-2 material finish packaging brass tin plating 1,500 pcs. per reel the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
2.5 5 8 3 r1 3.5 0.2 raised point of contact 8.2 a a b b 6 6.5 2.5 0.6 t-0.4 45 gt5 series gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines for direct coaxial cable termination 10.5 15 0.5 2 0.8 2.5 9 3 5.25 3.3 1 0.25 5 (0.25) 7.5 634 (0.52) c c 4.6 setscrew (m2.5) panel for use with coaxial cables 2.9 to 3.4 mm. outside diameter. for mid-cable termination part number gt-1.6pg-c cl no. 755-0031-0 material finish packaging brass tin plating 1 b recommended panel cut-out b attachment diagram 6.15 0.25 0.25 2.9 0.6 1.2 lands r0.3 1.9 pre-solder 2.8 3.5 r1 b recommended board termination pattern b completed termination cross section 13.6 9.8 8.55 0.5 1.5 2.5 4.75 2.4 2.6 0.25 0.8 2.8 0.25 0.15 1.9 2.4 1.8 1.1 lands 0.5 1.9 pre-soider 7.4 0.7 3.5 r1 0.7d equivalent b recommended board termination pattern b recommended completed termination cross section part number gta-0.7cf cl no. 755-0074-2 material finish packaging brass tin plating 1,500 pcs. per reel part number gtb-0.7cf cl no. 755-0075-5 material finish packaging brass tin plating 1,500 pcs. per reel lands the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
46 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines bottom shield cover 5.4 5.6 5 2.63 3.3 6.45 5.6 t=0.25 r1.6 part number gt5-1p/s-csb cl no. 755-0048-2 material finish brass tin plating mounted condition installed mounted condition installed gt5c-1p-csb 755-0088-7 part number cl no. t op shield cover for improved electronic noise compatibility the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
9.8 4.5 24.5 7.5 t=1 1.1 12 8 47 gt5 series gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines automatic crimping machine * crimp height setting tables are available for each cable type. please contact your nearest hirose electric account representative. different cables will require different crimp height settings. b t ermination tools user's manuals are available. please ask your hirose electric account representative. gt-bk gt-bk (01) panel mounting in-line bracket item specification stroke length number of strokes weight motor crimping speed specification 1.5tons 30mm 200spm(50hz) 75kg 0.2kw 2000 to 4000pcs. per day remarks 200spm(60hz) ac100v specifications part number gt-bk gt-bk(01) cl no. 751-0039-6 751-0039-6-01 material finish used with connectors spcc tin plating zinc plating gt5-1pp-hu(a), gt5-1pp-hu(b), gt5-1pp-hu(c), gt5-1pp-hu(d), gt5-1pp-hu(e), gt5-1pp-hu(i), gt5-1pp-hu(j), gt5-1pp-hu(k), gt5-2/1pp-hu, gt5-2pp-hu, gt5-2pp-hu(a), gt5-2pp-hu(b), gt5-2pp-hu(c) part number cm-105 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
48 gt5 series gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt5-30/1.6-2.9pcf gt5-30/1.6-2.9scf gt5-2428/1.6-2.9pcf gt5-2428/1.6-2.9scf gt5-2428/f3.3-5pcf gt5-2428/f3.3-5scf gt5-2022/f3.3-5pcf gt5-2022/f3.3-5scf gt5-30/f4-5pcf gt5-30/f4-5scf gt5-2428/f4-5pcf gt5-2428/f4-5scf gt5-2022/f4-5pcf gt5-2022/f4-5scf gt5-30/0.7-1.5pcf gt5-30/0.7-1.5scf gt5-2022/f2.7-3.5pcf gt5-2022/f2.7-3.5scf gt5-2022/1.6-2.9scf gt5-2022/f3.3-3.8pcf gt5-2022/f3.3-3.8scf gt5-2428/1.6-2.5pcf gt5-2428/1.6-2.5scf gt5-2428/1.6-2.9pcf gt5-2428/1.6-2.9scf gt5-2022/f4-5scf gt5-2022/f4-5pcf name of applicabe terminal name of applicabe applicator cl no. ap105-gt5-30/1.6-2.9p-id ap105-gt5-30/1.6-2.9p ap105-gt5-30/1.6-2.9p-a ap105-gt5-30/1.6-2.9s-id ap105-gt5-30/1.6-2.9s ap105-gt5-2428/1.6-2.9p ap105-gt5-2428/1.6-2.9pws ap105-gt5-2428/1.6-2.9s ap105-gt5-2428/1.6-2.9sws ap105-gt5-2428/f3.3-5p-id ap105-gt5-2428/f3.3-5s-id ap105-gt5-2022/f3.3-5p-id ap105-gt5-2022/f3.3-5p ap105-gt5-2022/f3.3-5p2.2d-id ap105-gt5-2022/f3.3-5s-id ap105-gt5-2022/f3.3-5s ap105-gt5-2022/f3.3-5s2.2d-id ap105-gt5-30/f4-5p-id ap105-gt5-30/f4-5s-id ap105-gt5-2428/f4-5p-id ap105-gt5-2428/f4-5p-3c2v ap105-gt5-2428/f4-5s-id ap105-gt5-2428/f4-5s-3c2v ap105-gt5-2022/f4-5p-id ap105-gt5-2022/f4-5p ap105-gt5-2022/f4-5s-id ap105-gt5-2022/f4-5s ap105-gt5-30/0.7-1.5p ap105-gt5-30/0.7-1.5s ap105-gt5-2022/f2.7-3.5p ap105-gt5-2022/f2.7-3.5s ap105-gt5-2022/1.6-2.9s ap105-gt5-2022/3.3-3.8p ap105-gt5-2022/3.3-3.8s ap105-gt5-2428/1.6-2.5p ap105-gt5-2428/1.6-2.5s ap105-gt5-2428/1.6-2.9p-b ap105-gt5-2428/1.6-2.9s-b ap105-gt5-2022/f4-5s-18id ap105-gt5-2022/f4-5s-rg58 ap105-gt5-2022/f4-5p-rg58 cl901-5019-6 cl901-5017-0 cl901-5040-2 cl901-5020-5 cl901-5018-3 cl901-5029-0 cl901-5031-1 cl901-5030-9 cl901-5032-4 cl901-5037-8 cl901-5038-0 cl901-5058-8 cl901-5059-0 cl901-5070-3 cl901-5060-0 cl901-5061-2 cl901-5071-6 cl901-5033-7 cl901-5034-0 cl901-5035-2 cl901-5056-2 cl901-5036-5 cl901-5057-5 cl901-5054-7 cl901-5052-1 cl901-5055-0 cl901-5053-4 cl901-5021-8 cl901-5080-7 cl901-5091-3 cl901-5092-6 cl901-5088-9 cl901-5100-3 cl901-5101-5 cl901-5103-0 cl901-5104-6 cl901-5102-8 cl901-5015-6 cl901-5016-9 harnes tool the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.

▲Up To Search▲

Price & Availability of GT5P-1PP-HU

	To Download GT5P-1PP-HU Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .