rej03g0580-0300 rev.3.00 dec 19, 2008 page 1 of 6 rjk5003dpd silicon n channel power mos fet high speed power switching use rej03g0580-0300 rev.3.00 dec 19, 2008 features ? v dss : 500 v ? r ds(on) : 1.5 ? (max.) ? i d : 5 a ? surface mount package (mp-3a) outline renesas package code: prss0004zg-a ( package name : mp-3a) 1 1 1. gate 2. drain 3. source 4. drain 3 3 2, 4 2 4 applications ? lighting ballast, smps, etc. maximum ratings (tc = 25c) parameter symbol ratings unit conditions drain to source voltage v dss 500 v v gs = 0 v gate to source voltage v gss 30 v v ds = 0 v drain current i d 5 a drain peak current i d (pulse) note1 20 a avalanche current i ap 5 a l = 200 h channel dissipation pch 62.5 w channel temperature tch 150 c storage temperature tstg ?55 to +150 c channel to case thermal impedance ch-c 2.0 c/w channel to case note: 1. pulse width limited by safe operating area.
rjk5003dpd rej03g0580-0300 rev.3.00 dec 19, 2008 page 2 of 6 electrical characteristics (tch = 25c) parameter symbol min. typ. max. unit test conditions drain to source breakdown voltage v (br)dss 500 ? ? v i d = 1 ma, v gs = 0 v zero gate voltage drain current i dss ? ? 1 ma v ds = 500 v, v gs = 0 v gate to source leak current i gss ? ? 0.1 a v gs = 25 v, v ds = 0 v gate to source cutoff voltage v gs(off) 3.0 3.5 4.0 v i d = 1 ma, v ds = 10 v static drain to source on state resistance r ds(on) ? 1.3 1.5 ? i d = 2 a, v gs = 10 v note2 input capacitance ciss ? 550 ? pf output capacitance coss ? 60 ? pf reverse transfer capacitance crss ? 10 ? pf v ds = 25 v, v gs = 0 v, f = 1 mhz turn-on delay time t d(on) ? 20 ? ns rise time t r ? 20 ? ns turn-off delay time t d(off) ? 60 ? ns fall time t f ? 25 ? ns v dd = 200 v, i d = 2 a, v gs = 10 v r g = 25 ? body-drain diode forward voltage v df ? 1.0 1.5 v i f = 2 a, v gs = 0 v note2 note: 2. pulse test
rjk5003dpd rej03g0580-0300 rev.3.00 dec 19, 2008 page 3 of 6 main characteristics 0 2 4 6 8 10 048121620 0 1 2 3 4 5 0246810 power vs. temperature derating case temperature tc (c) channel dissipation pch (w) maximum safe operating area drain to source voltage v ds (v) drain current i d (a) typical output characteristics drain current i d (a) drain to source voltage v ds (v) typical output characteristics drain current i d (a) drain to source voltage v ds (v) 0 10 20 30 40 50 60 70 0 50 100 150 200 p ds = 62.5 w tc = 25c pulse test tc = 25c pulse test 5 v 5 v 4v 10 v 7 v v gs = 20 v 6 v 10 v 7 v v gs = 20 v 6 v 4 v 0 4 8 12 16 20 0 4 8 12 16 20 0 0.8 1.6 2.4 3.2 4 drain to source saturation voltage vs. gate to source voltage (typical) gate to source voltage v gs (v) drain to source saturation voltage v ds(on) (v) static drain to source on state resistance vs. drain current (typical) drain current i d (a) drain to source on state resistance r ds(on) ( ? ) i d = 8 a tc = 25c pulse test 5 a 3 a v gs = 10 v 20 v tc = 25c pulse test 10 0 10 ?1 10 1 10 2 0.01 0.1 1 10 100 1 10 100 1000 pw = 10 s 100 s dc tc = 25 c single pulse operation in this area is limited by r ds(on)
rjk5003dpd rej03g0580-0300 rev.3.00 dec 19, 2008 page 4 of 6 10 1 10 2 2 3 5 7 10 3 2 3 5 7 transfer characteristics (typical) gate to source voltage v gs (v) drain current i d (a) switching characteristics (typical) drain to source voltage v ds (v) capacitance vs. drain to source voltage (typical) drain current i d (a) capacitance (pf) switching time (ns) 10 0 23 57 10 1 t d(off) t r tch = 25c v dd = 200 v v gs = 10 v r g = 25 ? pulse test t f t d(on) 0 4 8 12 16 01620 12 8 424 gate to source voltage vs. gate charge (typical) gate charge qg (nc) gate to source voltage v gs (v) reverse drain current vs. source to drain voltage characteristics (typical) source to drain voltage v sd (v) source current i dr (a) v ds = 100 v 200 v 400 v tch = 25c i d = 5 a 0.4 0.6 0.8 1.0 1.2 1.4 ?75 ?25 25 75 125 175 channel temperature tch (c) breakdown voltage vs. channel temperature (typical) v gs = 0 v i d = 1 ma drain to source breakdown voltage v (br)dss (tc) drain to source breakdown voltage v ( br)dss (25c) 0 2 4 6 8 10 0246 810 tc = 25 c v ds = 10 v pulse test 0 2 4 6 8 10 0 0.4 0.8 1.2 1.6 2 v gs = 0 v pulse test ta = 25 c 10 1 10 2 10 3 10 0 10 0 10 1 10 2 10 3 ciss coss crss tch = 25 c f = 1 mhz v gs = 0 v
rjk5003dpd rej03g0580-0300 rev.3.00 dec 19, 2008 page 5 of 6 10 ?1 10 0 2 3 4 5 7 10 1 2 3 4 5 7 ?75 ?25 25 75 125 175 10 5 2 1 0.5 0.2 100 m 1 10 100 1 m 10 m 0.1 channel temperature tch (c) gate to source cutoff voltage vs. channel temperature (typical) gate to source cutoff voltage v gs(off) (v) pulse width pw (s) static drain to source on state resistance vs. channel temperature (typical) channel temperature tch (c) v gs = 10 v i d = 2 a pulse test d = 1 0.5 0.2 0.1 0.01 0.02 0.05 single pulse drain to source on state resistance r ds(on) (tc) drain to source on state resistance r ds(on) (25c) t r t d(on) vin 90% 90% 10% 10% vout t d(off) 90% 10% t f vin monitor d.u.t. r l v dd vout monitor r g switching time measurement circuit switching waveform p dm pw t d = pw t 0 1.0 2.0 3.0 4.0 5.0 ?75 ?25 25 75 125 175 v ds = 10 v i d = 1 ma normalized transient thermal impedance s (t) normalized transient thermal impedance vs. pulse width
rjk5003dpd rej03g0580-0300 rev.3.00 dec 19, 2008 page 6 of 6 package dimensions sc-63 0.32g mass[typ.] ? prss0004zg-a renesas code jeita package code previous code unit: mm 10.4max 1max 0.5 0.2 0.1 0.1 0.5 0.2 0.76 0.76 0.2 2.3 0.2 5.3 0.2 6.6 1.4 0.2 6.1 0.2 1 0.2 2.3 2.5min 2.3 1 package name mp-3a ordering information part name quantity shipping container RJK5003DPD-00-J2 3000 pcs taping
notes: 1. this document is provided for reference purposes only so that renesas customers may select the appropriate renesas product s for their use. renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of renesas or any third party with respect to the information in this document. 2. renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of t he use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. you should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. when exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. all information included in this document such as product data, diagrams, charts, programs, algorithms, and application ci rcuit examples, is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas products listed in this document, please confirm the latest product information with a renesas sales office. also, please pay regular and careful attentio n to additional and different information to be disclosed by renesas such as that disclosed through our website. (http://www.renesas.com ) 5. renesas has used reasonable care in compiling the information included in this document, but renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. when using or otherwise relying on the information in this document, you should evaluate the information in light of the t otal system before deciding about the applicability of such information to the intended application. renesas makes no representations, warranties or guaranties regarding th e suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this do cument or renesas products. 7. with the exception of products specified by renesas as suitable for automobile applications, renesas products are not desi gned, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of h uman injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion co ntrol, aerospace and aeronautics, nuclear power, or undersea communication transmission. if you are considering the use of our products for such purposes, please contact a r enesas sales office beforehand. renesas shall have no liability for damages arising out of the uses set forth above. 8. notwithstanding the preceding paragraph, you should not use renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to us e renesas products in any of the foregoing applications shall indemnify and hold harmless renesas technology corp., its affiliated companies and their officers, dir ectors, and employees against any and all damages arising out of such applications. 9. you should use the products described herein within the range specified by renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas sha ll have no liability for malfunctions or damages arising out of the use of renesas products beyond such specified ranges. 10. although renesas endeavors to improve the quality and reliability of its products, ic products have specific characteristic s such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. please be sure to implement safety measures to guard against the poss ibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas product, such as safety design for hardware and software includin g but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. among others, sinc e the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. in case renesas products listed in this document are detached from the products to which the renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. you should implement safety measures so that renesas products may not be easily detached from your products. renesas shall have no liability for damages arising out of such detachment. 12. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from r enesas. 13. please contact a renesas sales office if you have any questions regarding the information contained in this document, renes as semiconductor products, or if you have any other inquiries. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to " http://www.renesas.com/en/network " for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology (shanghai) co., ltd. unit 204, 205, aziacenter, no.1233 lujiazui ring rd, pudong district, shanghai, china 200120 tel: <86> (21) 5877-1818, fax: <86> (21) 6887-7858/7898 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2377-3473 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 3518-3399 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas technology korea co., ltd. kukje center bldg. 18th fl., 191, 2-ka, hangang-ro, yongsan-ku, seoul 140-702, korea tel: <82> (2) 796-3115, fax: <82> (2) 796-2145 renesas technology malaysia sdn. bhd unit 906, block b, menara amcorp, amcorp trade centre, no.18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, m alaysia tel: <603> 7955-9390, fax: <603> 7955-9510 renesas sales offices ? 2008. renesas technology corp., all rights reserved. printed in japan. colophon .7.2
|
