document number: 42027 revision 14-nov-03 www.vishay.com 80 type 431p vishay sprague for technical questions, contact spresale@vishay .com performance characteristics operating temperature: - 55 c to + 85 c. capacitance range: 0.0047 f to 10.0 f. capacitance tolerance: 20%, 10%, 5%. voltage rating: 50 wvdc to 600 wvdc. dissipation factor: 1.0% maximum. voltage test: 200% of rated voltage for 2 minutes. insulation resistance: at + 25 c: 25,000 megohm - microfarads or 50,000 megohm minimum. at + 85 c: 1000 megohm - microfarads or 2500 megohm minimum. vibration test (condition b): no mechanical damage, short, open or intermittent circuits. life validation test: 125% of rated voltage for 250 hours @ + 85 c. no visible damage. no open or short circuits. maximum cap change = 10%. minimum ir = 50% of initial limit. maximum df = 1.25%. humidity test: 95% relative humidity at + 40 c for 250 hours. no visible damage. maximum cap change = 10%. minimum ir = 20% of initial limit. maximum df = 2.0%. physical characteristics lead material: leads are bare, solid tinned copper wire. lead pull: 5 pounds (2.3 kilograms) for 1 minute. no physical damage. lead bend: after three complete consecutive bends, no damage. marking: sprague ? trademark, type or part number, capacitance and voltage. dimensions in inches [millimeters] * part numbers listed are for a capacitance tolerance of 10%. to specify another capacitance tolerance, change x9 to x5 for 5% or x0 for 20%. standard ratings* in inches [millimeters] 50 wvdc 1.75 [44.45] min. l 0.062 [1.575] 1.75 [44.45] min. t max. w max. case size 0.33 0.39 0.47 0.56 0.68 0.82 1.00 1.50 w (max.) capacitance ( f) 431p334x9050 431p394x9050 431p474x9050 431p564x9050 431p684x9050 431p824x9050 431p105x9050 431p155x9050 part number* 0.210 [5.334] 0.182 [4.623] 0.191 [4.851] 0.209 [5.309] 0.231 [5.867] 0.192 [4.877] 0.212 [5.385] 0.252 [6.401] 0.317 [8.052] 0.290 [7.366] 0.323 [8.204] 0.340 [8.636] 0.363 [9.220] 0.323 [8.204] 0.344 [8.738] 0.406 [10.312] 0.625 [15.875] 0.750 [19.050] 0.750 [19.050] 0.750 [19.050] 0.750 [19.050] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 22 22 22 22 22 22 22 20 lead awg no. l .062 [1.575] t (max.) metalized polyester film capacitors wrap-and-fill features economical extensive standard ratings rugged construction small size
www.vishay.com 81 type 431p vishay sprague document number: 42027 revision 14-nov-03 for technical questions, contact spresale@vishay .com standard ratings* in inches [millimeters] case size capacitance ( f) part number* lead awg no. l .062 [1.575] t (max.) w (max.) 50 wvdc 0.274 [6.960] 0.311 [7.899] 0.283 [7.188] 0.307 [7.798] 0.349 [8.865] 0.365 [9.271] 0.400 [10.160] 0.492 [12.497] 0.496 [12.598] 0.507 [12.878] 431p205x9050** 431p255x9050 431p305x9050 431p405x9050 431p505x9050 431p605x9050 431p705x9050 431p106x9050** 431p126x9050 431p156x9050 2.00 2.50 3.00 4.00 5.00 6.00 7.00 10.00 12.00 15.00 1.0 [25.400] 1.0 [25.400] 1.250 [31.750] 1.250 [31.750] 1.500 [38.100] 1.500 [38.100] 1.500 [38.100] 1.500 [38.100] 1.750 [44.450] 1.750 [44.450] 20 20 20 20 20 20 20 20 20 20 100 wvdc 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00 7.00 10.00 12.00 15.00 200 wvdc 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00 7.00 10.00 12.00 0.480 [12.192] 0.517 [13.132] 0.488 [12.395] 0.513 [13.030] 0.554 [14.072] 0.620 [15.748] 0.654 [16.612] 0.747 [18.974] 0.740 [18.796] 0.860 [21.844] 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 0.625 [15.875] 0.625 [15.875] 0.750 [19.050] 0.750 [19.050] 0.750 [19.050] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.250 [31.750] 1.250 [31.750] 1.250 [31.750] 1.250 [31.750] 1.250 [31.750] 1.250 [31.750] 1.500 [38.100] 1.500 [38.100] 1.500 [38.100] 1.500 [38.100] 1.750 [44.450] 2.250 [57.150] 2.250 [57.150] 0.289 [7.341] 0.307 [7.798] 0.265 [6.731] 0.303 [7.696] 0.335 [8.509] 0.285 [7.239] 0.317 [8.052] 0.336 [8.534] 0.319 [8.103] 0.339 [8.611] 0.403 [10.236] 0.444 [11.278] 0.509 [12.929] 0.542 [13.767] 0.600 [15.240] 0.648 [16.459] 0.692 [17.577] 0.733 [18.618] 0.831 [21.107] 0.738 [18.745] 0.857 [21.768] 0.181 [4.597] 0.200 [5.080] 0.177 [4.496] 0.196 [4.978] 0.203 [5.156] 0.178 [4.521] 0.185 [4.699] 0.204 [5.182] 0.188 [4.775] 0.208 [5.283] 0.246 [6.248] 0.288 [7.315] 0.304 [7.722] 0.337 [8.560] 0.345 [8.763] 0.393 [9.982] 0.437 [11.100] 0.479 [12.167] 0.478 [12.141] 0.483 [12.268] 0.505 [12.827] 431p184x9100 431p224x9100 431p274x9100 431p334x9100** 431p394x9100 431p474x9100 431p564x9100 431p684x9100 431p824x9100 431p105x9100** 431p155x9100 431p205x9100 431p255x9100 431p305x9100 431p405x9100 431p505x9100 431p605x9100 431p705x9100 431p106x9100 431p126x9100 431p156x9100 431p104x9200** 431p124x9200 431p154x9200 431p184x9200 431p224x9200** 431p274x9200 431p334x9200 431p394x9200 431p474x9200** 431p564x9200 431p684x9200** 431p824x9200 431p105x9200** 431p155x9200 431p205x9200** 431p255x9200 431p305x9200 431p405x9200** 431p505x9200 431p605x9200 431p705x9200 431p106x9200 431p126x9200 0.191 [4.851] 0.199 [5.055] 0.186 [4.724] 0.194 [4.928] 0.215 [5.461] 0.190 [4.826] 0.200 [5.080] 0.218 [5.537] 0.231 [5.867] 0.254 [6.452] 0.282 [7.163] 0.258 [6.553] 0.287 [7.290] 0.336 [8.534] 0.341 [8.661] 0.366 [9.296] 0.407 [10.338] 0.427 [10.846] 0.486 [12.344] 0.496 [12.598] 0.544 [13.818] 0.558 [14.173] 0.622 [15.799] 0.298 [7.569] 0.331 [8.407] 0.293 [7.442] 0.326 [8.280] 0.347 [8.814] 0.297 [7.544] 0.332 [8.433] 0.350 [8.890] 0.387 [9.830] 0.410 [10.414] 0.438 [11.125] 0.414 [10.516] 0.443 [11.252] 0.541 [13.741] 0.547 [13.894] 0.628 [15.951] 0.662 [16.815] 0.682 [17.323] 0.741 [18.821] 0.848 [21.539] 0.897 [22.784] 0.910 [23.114] 0.975 [24.765] 0.625 [15.875] 0.625 [15.875] 0.750 [19.050] 0.750 [19.050] 0.750 [19.050] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.250 [31.750] 1.250 [31.750] 1.250 [31.750] 1.500 [38.100] 1.500 [38.100] 1.500 [38.100] 1.750 [44.450] 1.750 [44.450] 1.750 [44.450] 1.750 [44.450] 2.250 [57.150] 2.250 [57.150] 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 20 20 20 * part numbers listed are for a capacitance tolerance of 10%. to specify another capacitance tolerance, change x9 to x5 for 5% or x0 for 20%. ** inventoried.
document number: 42027 revision 14-nov-03 www.vishay.com 82 type 431p vishay sprague for technical questions, contact spresale@vishay .com case size capacitance ( f) part number* lead awg no. l .062 [1.575] t (max.) w (max.) standard ratings in inches [millimeters] 400 wvdc 22 22 22 22 22 22 22 22 22 22 20 22 20 20 20 20 20 20 20 20 20 20 20 20 0.625 [15.875] 0.625 [15.875] 0.625 [15.875] 0.750 [19.050] 0.750 [19.050] 0.750 [19.050] 0.750 [19.050] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.250 [31.750] 1.250 [31.750] 1.500 [38.100] 1.500 [38.100] 1.500 [38.100] 1.750 [44.450] 1.750 [44.450] 1.750 [44.450] 1.750 [44.450] 1.750 [44.450] 1.750 [44.450] 2.250 [57.150] 2.250 [57.150] 0.280 [7.112] 0.295 [7.493] 0.313 [7.950] 0.287 [7.290] 0.305 [7.747] 0.339 [8.611] 0.362 [9.195] 0.322 [8.179] 0.345 [8.763] 0.367 [9.322] 0.407 [10.338] 0.388 [9.855] 0.415 [10.541] 0.402 [10.211] 0.428 [10.871] 0.455 [11.557] 0.453 [11.506] 0.513 [13.030] 0.550 [13.970] 0.665 [16.891] 0.740 [18.796] 0.860 [21.844] 0.820 [20.828] 0.910 [23.114] 0.173 [4.394] 0.188 [4.775] 0.206 [5.232] 0.180 [4.572] 0.198 [5.029] 0.207 [5.258] 0.230 [5.842] 0.191 [4.851] 0.214 [5.436] 0.235 [5.969] 0.251 [6.375] 0.232 [5.893] 0.258 [6.553] 0.246 [6.248] 0.272 [6.909] 0.299 [7.595] 0.297 [7.544] 0.307 [7.798] 0.344 [8.738] 0.411 [10.439] 0.486 [12.344] 0.507 [12.878] 0.467 [11.862] 0.557 [14.148] 431p333x9400 431p393x9400 431p473x9400 431p563x9400 431p683x9400 431p823x9400 431p104x9400** 431p124x9400 431p154x9400 431p184x9400 431p224x9400 431p274x9400 431p334x9400 431p394x9400 431p474x9400 431p564x9400 431p684x9400 431p824x9400 431p105x9400 431p155x9400 431p205x9400 431p255x9400 431p305x9400 431p405x9400 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 1.50 2.00 2.50 3.00 4.00 600 wvdc 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 431p103x9600 431p123x9600 431p153x9600 431p183x9600 431p223x9600 431p273x9600 431p333x9600 431p393x9600 431p473x9600 431p563x9600 431p683x9600 431p823x9600 431p104x9600** 431p124x9600 431p154x9600 431p184x9600 431p224x9600** 431p274x9600 431p334x9600 431p394x9600 431p474x9600** 431p564x9600 431p684x9600 431p824x9600 431p105x9600 0.171 [4.343] 0.187 [4.750] 0.199 [5.055] 0.171 [4.343] 0.189 [4.801] 0.199 [5.055] 0.221 [5.613] 0.263 [6.680] 0.191 [4.851] 0.209 [5.309] 0.231 [5.867] 0.245 [6.223] 0.272 [6.909] 0.244 [6.198] 0.275 [6.985] 0.262 [6.655] 0.292 [7.417] 0.305 [7.747] 0.302 [7.671] 0.332 [8.433] 0.348 [8.839] 0.386 [9.804] 0.432 [10.973] 0.434 [11.024] 0.488 [12.395] 0.278 [7.061] 0.294 [7.468] 0.331 [8.407] 0.278 [7.061] 0.296 [7.518] 0.331 [8.407] 0.353 [8.966] 0.290 [7.366] 0.323 [8.204] 0.341 [8.661] 0.363 [9.220] 0.401 [10.185] 0.429 [10.897] 0.400 [10.160] 0.432 [10.973] 0.418 [10.617] 0.448 [11.379] 0.510 [12.954] 0.507 [12.878] 0.537 [13.640] 0.603 [15.316] 0.640 [16.256] 0.687 [17.450] 0.689 [17.501] 0.742 [18.847] 0.625 [15.875] 0.625 [15.875] 0.625 [15.875] 0.750 [19.050] 0.750 [19.050] 0.750 [19.050] 0.750 [19.050] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.0 [25.400] 1.250 [31.750] 1.250 [31.750] 1.500 [38.100] 1.500 [38.100] 1.500 [38.100] 1.750 [44.450] 1.750 [44.450] 1.750 [44.450] 1.750 [44.450] 1.750 [44.450] 2.0 [50.080] 2.0 [50.080] 22 22 22 22 22 22 22 20 22 22 22 20 20 20 20 20 20 20 20 20 20 20 20 20 20 * part numbers listed are for a capacitance tolerance of 10%. to specify another capacitance tolerance, change x9 to x5 for 5% or x0 for 20%. ** inventoried. ordering information 431p type 124 capacitance this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. values must conform to the decade rating for the tolerance specified. x9 capacitance tolerance x0 = 20% x9 = 10% x5 = 5% 050 dc voltage rating this is expressed in volts.
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
