3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? hshm press-fit header 2 mm type fr, 88 signal contacts, 8 rows, straight hshm series ? up to 5 gb/s data rates ? low crosstalk at high frequencies ? 50/100 (single-ended /differential) impedance ? modular/scalable format iec 61076-4-101 ? 101 mated lines per linear inch ? end-to-end stackable with 8 row 3m ? metpak ? cp2, hm and hshm headers ? see the regulatory information appendix (ria) in the rohs compliance section of www.3mconnectors.com for compliance information (ria e1 & c1 apply) date modifed: june 15, 2009 ts-2062-b sheet 1 of 3 physical insulation: material: high temperature thermoplastic (lcp) flammability: ul 94v-0 color: material: copper alloy plating: see ordering information performance mechanical: normal force (nominal): 0.57 n [58 g] signal, 0.74 n [75 g] shield engagement force (nominal): 0.32 n [33 g] signal, 0.22 n [22 g] shield separation force (nominal): 0.20 n [20 g] signal, 0.20 n [20 g] shield wipe (nominal, shortest contact): 2.67 mm [0.105 in] signal, 1.57 mm [0.062 in] shield durability 250 cycles with tr40b plating application: this module is not suitable for stand-alone use, (refer to iec-61076-4-101) electrical: data rate:5 gb/s characteristic impedance: 50 single-ended, 100 differential current rating (fully loaded): 1 a @ 70 c signal insulation resistance: 10 4 m @ 100 v dc withstanding voltage: 750 v rms environmental temperature rating: -55 c to 125 c ul file no.: e68080
3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? hshm press-fit header 2 mm type fr, 88 signal contacts, 8 rows, straight hshm series ts-2062-b sheet 2 of 3 ordering information hshm - h088frx - 8cpx - xxxxx mm (inch) tolerance unless noted 0 0.0 0.00 mm 3 .0.0 .0.13 ( ) dimensions used for reference only d e n o t es s h i e l d c o lu m n ( t ail o nl y ) o m i t t e d f o r t h e r o w d i f f e r en t i a l p a i r p a r t ro w f ro w e ro w d ro w c ro w b ro w a ro w z p i n p o s i t i o n s s h i e l d p o s i t i o n s 1 2 3 4 5 6 7 8 9 1 0 1 2 3 4 5 6 7 8 9 1 0 1 1 r o w d i f f e r e n t i a l c o n f i g u r a t i o n s h o w n w i t h p r o t e c t i v e c a p s * * c a p s to b e r e m o v e d a ft e r p r e s s - f i t i n s t a ll a t i o n p r o c e s s d i m a = p i n m a t i n g l e n g t h d i m b = s h i e l d t a i l l e n g t h d i m c = p i n t a il l e n g t h c o axial , c ol u m n di f f e r e n t i a l c o n f ig u r a t io n s h o w n w i t h p r o t e c t i v e c a p s * h s h m - h xx x xx - 8 xp x - x x xx x r e v x x xy y h s h m - h xx x xx - 8 xp x - x x xx x r e v x x xy y 1 . 5 0 . 0 5 9 1 8 . 0 0 . 7 0 9 2 . 0 0 . 0 7 9 2 . 0 0 . 0 7 9 2 . 0 0 . 0 7 9 2 . 0 0 . 0 7 9 2 0 . 0 0 . 7 8 7 ro w g ro w h ro w i 2 4 . 9 2 . 9 8 1 2 1 . 4 0 . 8 4 3 1 5 . 0 0 . 5 9 1 5 . 0 0 . 1 9 7 1 3 . 4 0 . 52 8 4 . 5 0 . 1 7 7 d i m c d i m a d i m b i n t e r s t i t i a l g r o u n d c o n t a c t s s i g n a l c o n t a c t s high speed option: 4 = coaxial, column differential and stripline (75 ) applications 5 = row differential applications plating m [ ? ]: tg30 = 0.76 [30] min. au contact area 2.54 [100] min. snpb terminal area 1.27 [50] min. ni all over tr40b = 0.127 [5] min. hard au contact area 1.02 [40] min. pdni contact area 0.10 [4] min. pd strike contact area 2.54 [100] min. snpb terminal area 1.27 [50] min. ni all over standard confguration dim a = 5.3 mm for rows a through for non-standard confgurations contact sales representative tail length 1 = 4.4 mm pin and 3.5 mm shield 2 = 2 mm pin and 2 mm shield (rows f and z not loaded)
3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? hshm press-fit header 2 mm type fr, 88 signal contacts, 8 rows, straight hshm series ts-2062-b sheet 3 of 3 r e co m m e n d e d p c b h o l e m o u n t i n g p a t t e r n fo r co a x i a l , c o l u m n di f f ere n t i al a p p l ica t io n s r e co m m e n d e d p c b h o l e m o u n t i n g p a t t e r n f o r r o w di f f e r e n t i a l a p p l i ca t i o n s ( s a m e g e o m e t r y a s l e f t v i e w wi t h o u t t h e g r o u n d v i a s) p l a t ed t h r u h o l e s s e e h o l e p l a t i n g ta b l e 0 . 1 0 m a b 2 . 0 0 + 0 . 0 5 0 a b c d e a b 1 2 3 4 5 6 7 8 9 1 0 1 1 a b c d e 1 2 3 4 5 6 7 8 9 1 0 1 1 f g h f g h 3 . 0 0 20 . 0 0 2 . 0 0 1 . 0 0 1 . 0 0 2 . 0 0 ? d i m . d 6 . 0 0 0 . 1 0 a b ? ? ? hole plating table mm [in.] finished hole dia. (d) cu. thickness snpb thickness drilled hole dia. 0.457 - 0.559 [.0180 - .0220] 0.025 - 0.045 [.0010 - .0018] 0.008 -0.018 [.0003 - .0007] 0.584 - 0.625 [.0230 - .0246]
important notice all statements, technical information, and recommendations related to 3m?s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3m?s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of?cer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3m?s option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. prin te d in usa. ? 3m 200 9 . all r ig hts r es erved. ? 3m ele ct ronics soluti on s divi sion 6801 river p la ce blvd. austin, tx 78726-9 000 u .s .a. 1-8 00 -225-5373 ww w.3mconnectors.com 3m is a trademark of 3m company.
|
