description ?high performance, ferrite-based, low profile, surface mount inductors ?small footprint and closed magnetic field construction allow for low emi ?low dcr and high efficiency ?rohs compliant (-r option) applications ?pc cards, cellular telephones, pagers, and disk drives ?gps systems environmental data ?storage temperature range: -40c to +125c ?operating ambient temperature range: -40c to +85c (range is application specific). ?infrared reflow temperature: +240? for 30 seconds maximum pa ck a ging ?supplied in tape and reel packaging, 3900 per reel pa rt inductance ocl (1) irms (2) isat (3) dcr (4) q (5) srf number ? ? 20% amperes amperes ohms (typ.) mhz (typ.) (typ.) (max.) (typ.) MP2-R47 0.47 0.40 2.02 3.40 0.075 10 300 mp2-1r0 1.0 1.02 1.67 2.10 0.103 20 160 mp2-1r5 1.5 1.59 1.51 1.70 0.118 25 155 mp2-2r2 2.2 2.29 1.39 1.40 0.130 32 150 mp2-3r3 3.3 3.58 1.25 1.10 0.156 42 140 mp2-4r7 4.7 4.60 1.18 1.00 0.180 46 130 mp2-6r8 6.8 7.02 1.06 0.80 0.202 46 110 mp2-100 10.0 9.95 0.98 0.68 0.240 55 100 mp2-150 15.0 15.30 0.88 0.54 0.300 65 60 mp2-220 22.0 21.80 0.80 0.45 0.360 65 45 mp2-330 33.0 33.70 0.64 0.37 0.556 65 35 mp2-470 47.0 46.40 0.52 0.31 0.833 65 28 micro-pac low profile power inductors (surface mount) 1) open circuit inductance test parameters: 100khz, 0.250 vrms, 0.0 adc 2) rms current, delta temp. of 40 c ambient temperature of 85 c 3) peak current for approximately 30% roll-off 4) values @ 20 c 5) measured @ 300khz mechanical diagrams yww xxx 7.50 max 5.88 5.2 max. 1.8 max. 1.05 2.00 5.40 7.50 dimensions in millimeters. specifications are subject to change without notice. yww = date code xxx = inductance value per family chart 0 20 40 60 80 100 120 04080 120 160 % of isat % of initial inductance inductance vs saturation current option code option code description -r rohs compliant version
micro-pac low profile power inductors (surface mount) visit us on the web at www.cooperet.com 3601 quantum boulevard boynton beach, florida 33426-8638 t el: +1-561-752-5000 toll free: +1-888-414-2645 fax: +1-561-742-1178 this bulletin is intended to present product design solutions and technical information that will help the end user with design applications. cooper electronic t echnologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit d istribution of any products. cooper electronic technologies also reserves the right to change or update, without notice, any technical information contained in thi s bulletin. once a product has been selected, it should be tested by the user in all possible applications. life support policy: cooper electronic technologies does not authorize the use of any of its products for use in life support d evices or systems without the express written approval of an officer of the company. life support systems are devices which support or sustain life, and whos e failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in signifi cant injury to the user. pm-4108 7/05 ? cooper electronic t echnologies 2005
|