spec no: dsad2552 rev no: v.12 date: apr/30/2010 page: 1 of 5 approved: wynec checked: allen liu drawn: xulina e rp: 1203000476 1.6x0.6mm right angle smd chip led lamp part number: KPA-1606SURCK hyper red features z 1.6mmx0.6mm right angle smt led,1.2mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package :2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. description the hyper red source color devices are made with al- gainp on gaas substrat e light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications.
spec no: dsad2552 rev no: v.12 date: apr/30/2010 page: 2 of 5 approved: wynec checked: allen liu drawn: xulina e rp: 1203000476 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 KPA-1606SURCK hyper red (algainp) water clear 110 250 110 iv (mcd) [2] @ 20ma symbol parameter device typ. max. units test conditions peak peak wavelength hyper red 650 nm i f =20ma d [1] dominant wavelength hyper red 630 nm i f =20ma ? 1/2 spectral line half-width hyper red 28 nm i f =20ma c capacitance hyper red 35 pf v f =0v;f=1mhz v f [2] forward voltage hyper red 1.95 2.5 v i f =20ma i r reverse current hyper red 10 ua v r =5v parameter hyper red units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 185 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsad2552 rev no: v.12 date: apr/30/2010 page: 3 of 5 approved: wynec checked: allen liu drawn: xulina e rp: 1203000476 hyper red KPA-1606SURCK
spec no: dsad2552 rev no: v.12 date: apr/30/2010 page: 4 of 5 approved: wynec checked: allen liu drawn: xulina e rp: 1203000476 KPA-1606SURCK reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsad2552 rev no: v.12 date: apr/30/2010 page: 5 of 5 approved: wynec checked: allen liu drawn: xulina e rp: 1203000476 packing & label specifications KPA-1606SURCK
|
