spec no: dsaa6577 rev no: v.4 date: mar/21/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: j.f.wang package dimension s kpd - 2520sgc - 03 super bright green description the super bright green source color devices are made with gallium phosphide green light emitting diode. 4.5x2mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .2(0.008") unless otherwise noted. 3.specifications are subject to change without notice. features 4.5x2mm smt led,0.5mm thickness low power consumption. ideal for backlight and indicator. various colors and lens types available. package : 1000pcs/reel. rohs compliant.
spec no: dsaa6577 rev no: v.4 date: mar/21/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: j.f.wang selection guid e electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 kpd - 2520sgc - 03 super bright green (gap) water clear 36 90 20 note: 1. 1/10 duty cycle, 0.1ms pulse width. note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. symbol parameter device typ. max. test conditions units peak peak wavelength super bright green 565 nm i f =20ma d dominant wavelength super bright green 568 nm i f =20ma ? 1/2 spectral line half - width super bright green 30 nm i f =20ma c capacitance super bright green 15 pf v f =0v;f=1mhz v f forward voltage super bright green 2.2 2.5 v i f =20ma i r reverse current super bright green 10 ua v r = 5v parameter super bright green units power dissipation 105 mw dc forward current 25 ma peak forward current [1] 140 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaa6577 rev no: v.4 date: mar/21/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: j.f.wang super bright green kpd - 2520sgc - 03
spec no: dsaa6577 rev no: v.4 date: mar/21/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: j.f.wang recommended soldering pattern (units : mm ) kpd - 2520sgc - 03 tape specifications (units : mm ) remarks: if special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|