spec no: dsad0133 rev no: v.3 date: nov/19/2005 page: 1 of 4 approved: j. lu checked: joe lee drawn: y.l.li notes: 1. all dimensions are in millimeters (inches), tolerance is 0 .25(0.01")unless otherwise noted. 2. specifications are subject to change without notice . p/n: kpda03 - 103 yellow description the yellow source color devices are made with gallium arsenide phosphide on gallium phosphide yellow light emitting diode. package dimensions & internal circuit diagram surface mount display features 0.3 inch digit height. low current operation. excellent character appearance. i.c. compatible. mechanically rugged. gray face,white segment. package :300pcs / reel. rohs compliant.
spec no: dsad0133 rev no: v.3 date: nov/19/2005 page: 2 of 4 approved: j. lu checked: joe lee drawn: y.l.li selection guide part no. dice lens type iv (ucd) @ 10ma min. typ. kpda03 - 103 yellow (gaasp/gap) white diffused 480 2290 common anode,rt. hand decimal. description absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. electrical / optical characteristics at t a =25 c symbol parameter device typ. max. test conditions units peak peak wavelength yellow 590 nm i f =20ma d dominant wavelength yellow 588 nm i f =20ma ? 1/2 spectral line half - width yellow 35 nm i f =20ma c capacitance yellow 20 pf v f =0v;f=1mhz v f forward voltage yellow 2.1 2.5 v i f =20ma i r reverse current yellow 10 ua v r = 5v parameter yellow units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 140 ma reverse voltage 5 v operating / storage temperature - 40c to +85c
spec no: dsad0133 rev no: v.3 date: nov/19/2005 page: 3 of 4 approved: j. lu checked: joe lee drawn: y.l.li yellow kpda03 - 103
spec no: dsad0133 rev no: v.3 date: nov/19/2005 page: 4 of 4 approved: j. lu checked: joe lee drawn: y.l.li tape specifications (units : mm ) recommended soldering pattern (units : mm ) kpda03 - 103 remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
