spec no: dsae2547 rev no: v.5 date: mar/16/2005 page : 1 of 6 approved: j. lu checked: allen liu drawn: b.h.li 3.2x1.0mm right angle full color smd chip led lamp features low power consumption. 3.2mmx1.0mm right angle smt led,1.5mm thickness. wide viewing angle. package : 2000pcs / reel. preliminary spe c package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3. specifications are subject to change without notice. attention observe precautions for handling electrostatic discharge sensitive device s kpfa - 3210qbcvgsekc blue green super bright orange description the blue source color devices are made with gan on sapphire light emitting diode. the green source color devices are made with ingan on sic light emitting diode. the super bright orange source color devices are made with dh ingaalp on gaas substrate light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti - electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded.
spec no: dsae2547 rev no: v.5 date: mar/16/2005 page : 2 of 6 approved: j. lu checked: allen liu drawn: b.h.li selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. symbol parameter device typ. max. test conditions units peak peak wavelength blue green super bright orange 470 520 610 nm i f =20ma d dominant wavelength blue green super bright orange 470 525 601 nm i f =20ma ? 1/2 spectral line half - width blue green super bright orange 25 38 29 nm i f =20ma c capacitance blue green super bright orange 105 45 15 pf v f =0v;f=1mhz v f forward voltage blue green super bright orange 3.3 3.5 2.1 4.0 4.5 2.5 v i f =20ma i r reverse current all 10 ua v r = 5v parameter blue green super bright orange units power dissipation 105 105 75 mw dc forward current 30 30 30 ma peak forward current [1] 150 150 195 ma reverse voltage 5 5 5 v operating/storage temperature - 40c to +85c part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 kpfa - 3210qbcvgsekc blue (gan) water clear 36 70 green (ingan) 50 200 super bright orange (ingaalp) 70 200 130
spec no: dsae2547 rev no: v.5 date: mar/16/2005 page : 3 of 6 approved: j. lu checked: allen liu drawn: b.h.li kpfa - 3210qbcvgsekc blue
spec no: dsae2547 rev no: v.5 date: mar/16/2005 page : 4 of 6 approved: j. lu checked: allen liu drawn: b.h.li green
spec no: dsae2547 rev no: v.5 date: mar/16/2005 page : 5 of 6 approved: j. lu checked: allen liu drawn: b.h.li super bright orange
spec no: dsae2547 rev no: v.5 date: mar/16/2005 page : 6 of 6 approved: j. lu checked: allen liu drawn: b.h.li recommended soldering pattern (units : mm ) tape specifications (units : mm ) kpfa - 3210qbcvgsekc smt reflow soldering instruction s number of reflow process shall be 2 times or less and cooling process to normal temperature is required between first and second soldering process. remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
