1 jal connector board-to-board connectors 0.4mm pitch emboss tape smt configuration 0.4mm pitch board-to- board connector with 4-row staggered leads that are located just below the surface of the wafer. with the csp (chip size package) technology, mounting area on the board is minimized. features ?minimized mounting area on the board bottom lead method reduces the projected pc board area. ?low profile only 1.5mm height after assembly. ?recommended and developed for small equipment such as dvc and mobile equipment specifications ?current rating: 0.3a ac, dc ?voltage rating: 30v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/40m ? max. after environmental testing/30m ? max. (variation from initial value) ?insulation resistance: 800m ? min. ?withstanding voltage: 200v ac/minute * rohs compliant products are published. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812
2 jal connector 0.4 0.15 2.2 0.25 0.7 b c a bc 11.6 14.0 17.2 14.15 16.55 19.75 3,000 3,000 3,000 60 72 88 a 11.6 14.0 17.2 60p-jalk-g1-tf 72p-jalk-g1-tf 88p-jalk-g1-tf contact: copper alloy, nickel-undercoated, gold-plated housing: heat resisting resin, ul94v-0 solder tab: copper alloy, copper-undercoated, tin-plated (reflow treatment) cir- cuits model no. dimensions (mm) q'ty / reel material and finish rohs compliance this product displays (lf)(sn) on a label. note: the products listed above are supplied on embossed-tape. plug c 0.3 1.6 b a 0.15 2.2 0.25 bc 11.6 14.0 17.2 15.95 18.35 21.55 3,000 3,000 3,000 60 72 88 a 11.6 14.0 17.2 60r-jalk-g1-tf 72r-jalk-g1-tf 88R-JALK-G1-TF contact: copper alloy, nickel-undercoated, gold-plated housing: heat resisting resin, ul94v-0 solder tab: copper alloy, copper-undercoated, tin-plated (reflow treatment) cir- cuits model no. dimensions (mm) q'ty / reel material and finish rohs compliance this product displays (lf)(sn) on a label. note: the products listed above are supplied on embossed-tape. receptacle 2.6 0.05 0.5 0.03 1.5 0.03 a 0.05 0.4 0.03 (board pattern) 0.8 0.03 0.4 0.03 0.65 0.05 1.4 0.05 0.4 (no pattern allowed) 0.4 0.03 (board pattern) 2.7 0.05 2.6 0.05 1.7 0.03 0.5 0.03 0.65 0.05 0.5 0.05 0.8 0.03 0.4 0.03 a 0.05 +0.05 0 plug receptacle pc board layout (viewed from soldering side) note: 1. tolerances are non-cumulative: 0.03mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guidel ine. contact jst for details. 3.7 1.5 assembly layout
|
