unisonic technologies co., ltd utt50p06 preliminary power mosfet www.unisonic.com.tw 1 of 3 copyright ? 2011 unisonic technologies co., ltd qw-r502-596.a -50a, -60v p-channel (d-s) power mosfet ? description the utc utt50p06 is a p-channel power mosfet using utc?s advanced technology to provide the customers with high switching speed and a minimum on-state resist ance, and it can also withstand high energy in the avalanche. this utc utt50p06 is suitable for load switch,etc. ? features * v ds = -60v * i d = -50a * r ds(on) =0.012 ? @ v gs =-10v, i d =-17a * high switching speed ? symbol 1.gate 2.drain 3.source ? ordering information ordering number pin assignment lead free halogen free package 1 2 3 packing UTT50P06L-TA3-T utt50p06g-ta3-t to-220 g d s tube note: pin assignment: g: gate d: drain s: source
utt50p06 preliminary power mosfet unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r502-596.a ? absolute maximum ratings (t a =25c, unless otherwise specified) parameter symbol ratings unit drain-source voltage v dss -60 v gate-source voltage v gss 20 v t c =25c -50 (note 5) a continuous (t j =175c) t c =125c i d -27.5 a drain current pulsed i dm -80 a avalanche current i ar -50 a single pulse avalanche energy (note 2) l=0.1mh e as 125 mj t c =25c 113 (note 4) power dissipation t a =25c p d 2.5 (note 3, 4) w junction temperature t j -55~+150 c storage temperature t stg -55~+150 c notes: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. duty cycle 1%. 3. when mounted on 1" square pcb (fr-4 material). 4. see soa curve for voltage derating. 5. package limited. ? thermal characteristics parameter symbol ratings unit t 10s 18 junction to ambient (note 3) steady state ja 50 junction to case jc 1.1 c/w
utt50p06 preliminary power mosfet unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r502-596.a ? electrical characteristics (t j =25c, unless otherwise specified) parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss v gs =0v, i d =-250a -60 v gate threshold voltage v gs(th) v ds =v gs , i d =-250a -1 -3 v v ds =-60v, v gs =0v -1 v ds =-60v, v gs =0v, t j =125c -50 drain-source leakage current i dss v ds =-60v, v gs =0v, t j =150c -100 a forward v gs =+20v, v ds =0v +100 na gate- source leakage current reverse i gss v gs =-20v, v ds =0v -100 na on characteristics v gs =-10v, i d =-17a 0.012 0.015 v gs =-10v, i d =-50a, t j =125c 0.025 v gs =-10v, i d =-50a, t j =150c 0.028 static drain-source on-state resistance (note 1) r ds(on) v gs =-4.5v, i d =-14a 0.020 ? forward transconductance (note 1) g fs v ds =-15v, i d =-17a 61 s on state drain current (note 1) i d(on) v gs =-10v, v ds =-5v -50 a dynamic parameters (note 2) input capacitance c iss 4950 pf output capacitance c oss 480 pf reverse transfer capacitance c rss v gs =0v, v ds =-25v, f=1mhz 405 pf switching parameters (note 2, 3) total gate charge q g 110 165 nc gate to source charge q gs 19 nc gate to drain charge q gd v gs =-10v, v ds =-30v, i d =-50a 28 nc turn-on delay time t d(on) 15 23 ns rise time t r 70 105 ns turn-off delay time t d(off) 175 260 ns fall-time t f v dd =-30v, r l =0.6 ? , i d -50a, v gen =-10v, r g =6 ? 175 260 ns source- drain diode ratings and characteristics (t c =25c) (note 2) maximum body-diode continuous current i s -50 a maximum body-diode pulsed current i sm -80 a drain-source diode forward voltage (note 1) v sd i f =-50a, v gs =0v -1.0 -1.6 v body diode reverse recovery time t rr i f =-50a, di/dt=100a/s 45 70 ns notes: 1. pulse test; pulse width 300s, duty cycle 2%. 2. guaranteed by design, not subject to production testing. 3. independent of oper ating temperature. utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior wr itten consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
