hdmi? port hdmi 1.4 - esd & overcurrent protection half-duplex ethernet hdmi asic MF-FSMF020X-2 vcc +5v tmds_d2+ tmds_d2- tmds_d1+ tmds_d0+ tmds gnd tmds_d0- tmds_dclk+ tmds_dclk- hec+ hec- cg0402mlu-05g tmds_d1- tmds gnd hdmi connector cg0402mlu-05g cg0402mlu-05g te schematic above illustrates the application protection and does not constitute the complete circuit design. customers should verify actual device performance in their specifc applications. cg0402mlu-05g MF-FSMF020X-2 copyright? 2011 ? bourns, inc. ? 9/11 ? e/cpk1137 ? portnote is a registered service mark of bourns, inc. bourns, multifuse and chipguard are registered trademarks of bourns, inc. in the u.s. and other countries. hdmi is a registered mark of its owner. solution products asia-pacifc: tel +886-2 256 241 17 fax +886-2 256 241 16 bourns? portnote? solutions provide protection recommendations for typical port threats. for more information, go to: www.bourns.com or email: protection@bourns.com americas: tel +1-951 781-5500 fax +1-951 781-5700 europe: tel +41-(0)41 768 55 55 fax +41-(0)41 768 55 10 compliance iec 61000-4-2 level 4 (8 kv / 15 kv) alternate recommendations other portnote? solutions: ? hdmi: hdmi 1.3 - esd & overcurrent protection other chipguard? protectors: cg0603mlu-05e, cg0402mlc-05lga cg0603mlc-05lea beneft tis solution provides iec 61000 level 4 esd protection without impairing the hdmi signal. objective hdmi 1.4 is a hot-pluggable interface combining video, audio & ethernet signals. voltages are 5 v or lower and the bandwidth is 340 mhz. tis solution privides hdmi 1.4 ports with protection against esd and short circuits without impairing the transmission of power or data solution 9 chipguard? esd suppressors: cg0402mlu-05g 1 multifuse? ptc resettable fuse: MF-FSMF020X-2 pn-designkit-12 design kit
|
