? 2000 teledyne relays 800-284-7007 ? www.teledynerelays.com gd 1 6a, 230/240vac, 300vdc single throw four pole electrical specifications general specifications parameter min typ max units operate time (see note 1) 17 msec release time (see note 1) 7 msec switching frequency 5 hz shock (11 msec, see note 3) 10 g vibration (10-200 hz, see note 3) 5 g electrical life 10 5 cycles mechanical life 10 7 cycles ambient temperature -25 80 o c contact specifications maximum load current 1 contacts 6 a 2 contacts 4.2 a 3 contacts 3.5 a maximum switching voltage 230/240 vac 300 vdc maximum load capacity (resistive) 1500/30 va/w maximum switching capacity ac15-230/240v 4 arms (inductive) dc13-24v 2 adc contact resistance (see note 2) 100 mohm dielectric test voltage (o=iii, p=2) coil to contact 2500 vac contact to contact 2000 vac series gd force guided relay rated for 6a, 230/240 vac, 300 vdc available in 4 pole configuration. polarized dc drive. see table 1 for part numbers. features: ? force guided contacts per en50205: consists of at least one no and one nc contact mechanically linked. this allows the contacts behavior to be pre- determined and the user the ability to monitor the contact.the mechanism provides true status. ? dielectric designed for 3-phase systems. ? contacts are physically linked making it impossible for a no and nc to be closed simultaneously. ? internal creepage distances and clearances are designed for overvoltage category iii and degree of pollution 2 per iec 60664. ? wide range of contact configurations and coil voltages. approvals: cul: approved tv / vde: pending accessories:contact factory current regulator unit dil housing current regulator unit so.8 housing removing tool socket with soldering pins for pcb mounting socket for conventional mounting. new series gd relays
gd 2 specifications are subject to change without notice ? 2000 teledyne relays outline dimensions series gd part no. contacts contact material coil resistance coil voltage (/gold plating) (ohm)12% (nominal @ 25c) gd31-1002 3no/1nc agni/0.2 255 12 gd31-1003 3no/1nc agni/0.2 1,020 24 gd31-1009 3no/1nc agni/2.0 255 12 gd31-1010 3no/1nc agni/2.0 1,020 24 GD22-1016 2no/2nc agni/0.2 255 12 gd22-1017 2no/2nc agni/0.2 1,020 24 gd22-1019 2no/2nc agni/0.2 3,910 48 gd22-1023 2no/2nc agni/2.0 255 12 gd22-1024 2no/2nc agni/2.0 1,020 24 gd31-1050 3no/1nc agni/0.2 820 22 gd22-1051 2no/2nc agni/0.2 820 22 gd31-1130 3no/1nc agni/2.0 820 22 gd31-1133 3no/1nc agni/0.2 1,020 24 gd31-1140 3no/1nc agni/2.0 1,020 24 characteristics table 3no/1nc 2no/2nc (mm) (mm) 4 pole package (mm) notes: 1) timing varies with coils voltage. 2) for new contacts only. 3) contacts will not chatter in excess of 1ms. view from terminals table 1
|