53 tcm type e case size see table above 108 capacitance code pf code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) m tolerance m=20% 004 rated dc voltage 004=4vdc 006=6.3vdc 010=10vdc 035=35vdc how to order r packaging r = lead free 7" reel s = lead free 13" reel technical data: all technical data relate to an ambient temperature of +25c capacitance range: 22 f to 1000 f capacitance tolerance: 20% leakage current dcl: 0.1cv rated voltage (v r ) +85c: 4 6.3 10 35 category voltage (v c ) +105c: 3.2 5 8 28 surge voltage (v s ) +85c: 5.2 8 13 46 surge voltage (v s ) +105c: 4 6 10 35 temperature range: -55oc to +105oc reliability: 1% per 1000 hours at 85c, v r with 0.1/v series impedance, 60% confidence level technical specifications tcm series tantalum solid electrolytic chip capacitors conductive polymer multianode case dimensions: millimeters (inches) code eia eia l0.20 w+0.20 (0.008) h+0.20 (0.008) w 1 0.20 a+0.30 (0.012) s min. code metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008) e 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) w 1 dimension applies to the termination width for a dimensional area only. 0010 esr in m for part marking see page 134 lead-free compatible component ? conductive polymer multianode ? extremely low esr ? reduced ignition failure mode ? 3x reflow 260c compatible ? volumetric efficiency ? high frequency capacitance retention
54 tcm series tantalum solid electrolytic chip capacitors conductive polymer multianode capacitance rated voltage dc (v r ) to 85c f code 4v (g) 6.3v (j) 10v (a) 35v (v) 22 226 e(25) 33 336 47 476 68 686 100 107 150 157 220 227 330 337 e* e(10) 470 477 e* e* 680 687 1000 108 e(10,12) 1500 158 capacitance and rated voltage, vr (voltage code) range (letter denotes case size) available ratings, (esr ratings in mohms in brackets) engineering samples - please contact manufacturer *codes under development C subject to change note: v oltage ratings ar e minimum values. avx reserves the right to supply higher ratings in the same case size, to the same reliability standards. ratings & part number reference moisture sensitivity level (msl) is defined according to j-std-020. all technical data relates to an ambient temperature of +25oc. capacitance and df are measured at 120hz, 0.5rms with dc bias of 2.2 volts. dcl is measured at rated voltage after 5 minutes. esr allowed to move up to 1.25 times catalog limit post mounting. for typical weight and composition see page 127. note: avx reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. voltage vs temperature rating 100% 80% 100% 80% 80% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% -55c 0c 40c 60c 85c 105c rated range recommended derating rated dcl df esr 100khz rms current (ma) 100khz rms voltage (mv) avx case capacitance voltage (a) % max. (m) msl part no. size (f) (v) max. max. @100khz 25oc 85oc 105oc 25oc 85oc 105oc 4 volt @ 85c (3.2 volt @ 105c) tcme108m004#0010 e 1000 4 400 8 10 3 4062 3656 2640 41 37 26 tcme108m004#0012 e 1000 4 400 8 12 3 3708 3337 2410 44 40 12 6.3 volt @ 85c (5 volt @ 105c) tcme337m006#0010 e 330 6.3 198 8 10 3 4062 3656 2640 41 37 26 tcme447m006#0010 e 470 6.3 282 8 10 3 4062 3656 2640 41 37 26 10 volt @ 85c (8 volt @ 105c) tcme337m010#0010 e 330 10 330 8 10 3 4062 3656 2640 41 37 26 35 volt @ 85c (28 volt @ 105c) tcme226m035#0025 e 22 35 77 8 25 3 2569 2312 1670 64 58 42
|
