specification control drawing te connectivity 305 constitution drive menlo park, ca 94025, usa raychem products title: coaxial soldersleeve device with pre-installed stranded wires unless otherwise specified dimensions are in millim eters. inches dimensions are between brackets. document no.: b-040-ga-n tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 15-apr-11 doc issue: 3 drawn by: m. foronda replaces: d000433 dcr number: d000581 prod. rev. see table scale: none size: a sheet: 1 of 1 print date: 9-may-11 if this document is printed it becomes uncontrolled . check for the latest revision. product revision component dimensions ga cable d imensions product name l max ?a min ?b min ?c min wire gauge (awg) ?d ?e ?f min g0.5 (g0.02) m0.5 (m0.02) b-040-20-n d 20 1.70 1.50 b-040-22-n d 22 (0.065) (0.060) b-040-24-n d 30.0 4.40 2.80 1.60 24 to to 0.30 16.0 6.0 b-040-26-n d (1.180) (0.175) (0.110) (0.060) 26 4.4 0 2.80 (0.012) (0.630) (0.235) b-040-28-n d 28 (0.175) (0.110) b-040-30-n d 30 materials 1. & 5. insulation sleeve: heat-shrinkable, radiati on cross-linked modified polyvinylidene fluoride. t ransparent blue. 2. & 4. solder preforms with flux: solder: type sn63 per ansi j-std-006. flux: type rol1 per ansi j-std-004. 3. & 6. meltable rings: thermally stabilized thermo plastic. 7. conductor lead: mil-w-22759/32-ga-9, awg ga ( see table). etfe insulated, stranded tin plated cop per. color: white. 8. ground lead: mil-w-22759/32-ga-6, awg ga (see table). etfe insulated, stranded tin plated copper . color: blue. application 1. the parts covered by this scd are for use in ter minating the primary conductor and the braided shie ld of a coaxial cable having tin or silver plated conductor and shie ld, rated for at least 125 c and meeting the dimen sional requirements listed. 2. parts will meet the requirements of raychem spec ification rt-1404 when installed per raychem rpip-5 00-03. 3. temperature range: -55c to +150c. for best results, prepare the cable as shown:
|