absolute maximum ratings parameter symbol min max unit supply voltage v iocc -0.3 4.6 v input voltage v in -0.3 v cc v operating temperature t op storage temperature t stg electrical characteristics (vdd=2.80.115v 25c) parameter sym condition min typ max unit operating voltage v iovcc - -2.8- input high voltage v ih cc v input low voltage v il ledforwardvoltage v atif=15ma - 13.2 - v f f cd/m 2 physical data module size........................................43.6w x87.0h x3.0t mm viewing area size.........................................41.1w x53.2 h mm pitch size...............................................0.153w x 0.153h mm dimensional drawing 2.4? ,240 x 320 (tft) color graphics ,led(white) backlight gnd + 2.8v power supply HDA240A absolute maximum ratings features viewing angleu/d/r/l).............................60/45/60/60 degrees high contrast....................................................................300:1 built-in dc-dc converter built-in controller............................................................ili9325 features operating current i dd -5.57.7ma brightness l average 135 c c tft led+ -30 -20 80 70 backlight forward current i - fi -20ma fast response time ......................................................30 ms v 0.8v - v - cc -0.3-0.2v v led forward current i at vf = 13.2v - 15 - ma - 13.2v + weight................................................................................11.0g 15 ma led- - pin connections pin no. symbol function 12 nreset l reset input 32 nwr/scl l or h/l write strobe input or clock for spi mode 33 rs h/l control-index select input 34 ncs l chip select input 22 d08 h/l bi-directional data bus (8,16,18 bit wide) 5 nc - no connection 31 nrd li read strobe input 21 d09 h/l 20 d10 h/l 19 d11 h/l 18 d12 h/l 17 d13 h/l 16 d14 h/l 15 d15 h/l 14 d16 h/l 13 d17 h/l 23 d07 h/l 24 d06 h/l 25 d05 h/l 26 d04 h/l 27 d03 h/l 28 d02 h/l 29 d01 h/l 30 d00 h/l v iovcc 6 vss i ground 36 vcc i power supply voltage 3 led-k i led cathode 1 led-a i led anode 35 vci i power supply voltage (analog) 4 led-k i led cathode 2 led-a i led anode 7 nc - no connection 8 nc - no connection 9-11 nc - no connection recommended connector : molex 0541323662
|