View EDSX7-60J_4507118.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

features data sheet fke ... 4 level transmitter date EDSX7-60J mar. 7, 2007 the fcx? 2 level transmitter accurately measures liquid level and transmits a proportional 4 to 20ma signal. the trans- mitter utilizes a unique micromachined capacitance silicon sensor with state-of-the-art microprocessor technology to provide exceptional performance and functionality. 1. high accuracy 0.2% accuracy for all calibrated spans is a standard fea- ture for all models covering 0.32kpa {3.2mbar} range to 500kpa {5bar} high differential pressure range. 0.1% ac- curacy is available as option. fuji? micro-capacitance silicon sensor assures this accuracy for all elevated or suppressed calibration ranges without additional adjust- ment. 2. minimum environmental influence the ?dvanced floating cell?design which protects the pressure sensor against changes in temperature, static pressure, and overpressure substantially reduces total measurement error in actual field applications. 3. fuji/hart bilingual communications protocol and foundation fieldbus and profibus compatibil- ity fcx? 2 series transmitter offers bilingual communica- tions to speak both fuji proprietary protocol and hart . any hart compatible devices can communicate with fcxa 2 . further, by upgrading electronics foundation fieldbus and profibus are also available. 4. application flexibility various options that render the fcx? 2 suitable for almost any process applications include: analog indicator at either the electronics side or ter- minal side full range of hazardous area approvals built-in rfi filter and lightning arrester 5-digit lcd meter with engineering unit stainless steel electronics housing wide selection of materials high temperature, high vacuum service. 5. programmable output linearization function output signal can be freely programmable. (up to 14 compensated points at approximation.) 6. burnout current flexibility (under scale: 3.2 to 3.8ma, over scale: 20.8 to 21.6ma) burnout signal level is adjustable using model fxw hand held communicator (hhc) to comply with namur ne43. 7. dry calibration without reference pressure thanks to the best combination of unique construction of mechanical parts (sensor unit) and high performance electronics circuit (electronics unit), reliability of dry cali- bration without reference pressure is at equal level as wet calibration.
fke ... 4 2 load limitations: see figure below note: for communication with hhc (1) (model: fxw), min. of 250 ? required. 2000 [ ? ] 1500 1000 load resistance 500 250 0 1533 ? 600 ? operating area 24v 45v 10 16.1 50 [ v ] 10.5v power voltage specifications functional specifications service: liquid, gas, or vapour static pressure, span, and range limit: remark: to minimize environmental influence, span should be greater than 1 /40 of the max. span in most applications. lower limit of static pressure (vacuum limit) ; silicone fill sensor: see fig.1 fluorinated fill sensor: 66kpa abs (500mmhg abs) at temperature below 60 c. the maximum span of each sensor can be converted to different units using factors as below. 1mpa=10 3 kpa=10bar=10.19716kgf/cm 2 =145.0377psi 1kpa=10mbar=101.9716mmh 2 o=4.01463inh 2 o overrange limit: to maximum static pressure limit output signal: 4 to 20ma dc with digital signal superim- posed on the 4 to 20ma signal power supply: transmitter operates on 10.5v to 45v dc at transmitter terminals. 10.5v to 32v dc for the units with op- tional arrester. range limit [kpa] {m bar} fke 3 fke 5 fke 6 type span limit [kpa] {m bar} +/?32 { +/?320} +/?130 { +/?1300} +/?500 { +/?5000} max. 0.32 {3.2} 1.3 {13} 5 {50} min. static pressure ? ? ? 32 {320} 130 {1300} 500 {5000} up to flange rating hazardous locations: a tex ex ii 2 gd eex d iic t6 ip66/67 t85 c tamb = 40 c to +65 c eex d iic t5 ip66/67 t100 c tamb = 40 c to +85 c factory mutual class i div.1 groups b, c, d t6 type 4x class ii iii div.1 groups e, f, g t6 type 4x tamb max = +60 c csa class i div.1 groups c, d class ii div.1 groups e, f, g class iii div.1 note) ?eal not required?enclosure is allowed. tiis ex do iib+h 2 t4 tamb max = +55 c maximum process temp. = +120 c iecex scheme /saa ex d iic t5 ip66/67 pending tamb = 40 c to +85 c ex d iic t6 ip66/67 pending tamb = 40 c to +65 c authorities flameproof a tex ex ii 1 gd eex ia iic t5 tamb = 40 c to +40 c eex ia iic t4 tamb = 40 c to +80 c entity parameters: ui=28v, ii=93.3ma, pi=0.66w, ci=27nf (without arrester), ci=34.2nf (with arrester), li=1.134mh factory mutual class i ii iii div.1 groups a, b, c, d, e, f, g t4 entity type 4x entity parameters: vmax=42.4v, imax=113ma, pi=1w, ci=34.2nf, li=1.134mh csa class i div.1 groups a, b, c, d class ii div.1 groups e, f, g class iii div.1 temp code t4 tamb max = +40 c temp code t3c tamb max = +85 c entity parameters: vmax=28v, imax=93ma, ci=27nf (without arrester), ci=34.2nf (with arrester), li=1.4mh tiis ex ia iic t4 tamb max = +60 c entity parameters: ui=28v, ii=94.3ma, pi=0.66w, ci=32.6nf, li=1.134mh iecex scheme /saa ex ia iic t4 ip66/67 tamb = 40 c to +70 c ex ia iic t5 ip66/67 tamb = 40 c to +50 c entity parameters: ui=28v, ii=93.3ma, pi=0.66w, ci=0.033 f, li=1.034mh authorities intrinsic safety model code 9th digit 13th digit a,b,d y,g,h,j,s,t,k 40 c to +85 c l,p,1,2 y,g,h,j,s,t,k 20 c to +80 c q ,s,4,5 y,g,h,j,s,t,k 20 c to +60 c e,f,h y,g,h,j,s,t,k 40 c to +60 c w,a,d ?0 c to +60 c t amb
3 ?utput underscale? adjustable within the range 3.2ma to 3.8ma from hhc (1) 3.8 3.2 4 20 20.8 21.6 [ma] over scale burnout probable over range probable under range normal operating range under scale burnout loop-check output: transmitter can be configured to provide constant signal 3.8ma through 21.6ma by hhc (1) . temperature limit: ambient: ?40 to + 85 c (?20 to + 80 c for lcd indicator) (?40 to + 60 c for arrester option) (?10 to + 60 c for fluorinated oil fill transmitter) for explosionproof units (flameproof or intrinsic safety), ambient temperature must be within the limits speci- fied in each standard. process: a tex ex ii 3 gd eex nl iic t5 tamb = 40 c to +40 c eex nl iic t4 tamb = 40 c to +80 c specific parameters: model without arrester: ui=42.4v, ii=113ma, pi=1w, ci=27nf, li=1.134mh model with arrester: ui=32v, ii=113ma, pi=1w, ci=34.2nf, li=1.134mh eex nal iic t5 tamb = 40 c to +40 c eex nal iic t4 tamb = 40 c to +80 c specific parameters: model without arrester: umax=42.4v, imax=113ma, pmax=1w model with arrester: umax=32v, imax=113ma, pmax=1w factory mutual class i ii iii div.2 groups a, b, c, d, f, g t4 entity type 4x csa class i div.2 groups a, b, c, d class ii div.2 groups e, f, g class iii div.2 temp code t4 tamb max = +40 c temp code t3c tamb max = +85 c entity parameters: vmax=28v, ci=27nf (without arrester), ci=34.2nf (with arrester), li=1.4mh tiis iecex scheme /saa authorities t ype n nonincendive model code 9th digit 13th digit a,b,d y,g,h,j,s,t,k 40 c to +85 c l,p,1,2 y,g,h,j,s,t,k 20 c to +80 c q ,s,4,5 y,g,h,j,s,t,k 20 c to +60 c e,f,h y,g,h,j,s,t,k 40 c to +60 c w,a,d ?0 c to +60 c t amb zero/span adjustment : zero and span are adjustable from the hhc (1) . zero and span are also adjustable externally from the adjustment screw (span adjustment is not available with 9th digit code ?, p, q , s?. damping: adjustable from hhc or local adjustment unit with lcd display. the time constant is adjustable between 0.12 to 32 seconds. zero elevation/suppression: ?100% to + 100% of url normal/reverse action: selectable from hhc (1) indication: analog indicator or 5-digit lcd meter, as specified. burnout direction: selectable from hhc (1) if self-diagnostic detect transmitter fail- ure, the analog signal will be driven to ei- ther ?utput hold? ?utput overscale or ?utput underscale?modes. ?utput hold? output signal is hold as the value just be- fore failure happens. ?utput overscale? adjustable within the range 20.8ma to 21.6ma from hhc (1) storage: ?40 to + 90 c humidity limit: 0 to 100% rh communication: with hhc (1) (model fxw, consult data sheet no. eds8-47), following informa- tion can be remotely displayed or recon- figured. note: hhc? version must be more than 6.0 (or fxw 1 3), for fcx- a 2 . atmospheric pressure 2.7kpa abs {20.3mmhg abs} 0.13kpa abs {0.98mmhg abs} w, a and d h j y and g s t k fluorinated oil silicone oil ?0 to 120 c 15 to 250 c 85 to 300 c 40 to 120 c ?5 to 250 c 85 to 300 c ?5 to 150 c low pressure side contact liquid temperature on transmitter of code h, j, s, t is 120 c or lower. low pressure side contact liquid temperature of code k is 85 c or lower code in the 13th digit of ?ode symbols process temperature lower limit of static press items display set tag no. model no. serial no. engineering unit range limit measuring range damping output mode burnout direction calibration output adjust data self diagnoses printer external switch lock transmitter display linearize rerange vv vv v vv v vv vv v vv vv ? v v vv vv vv vv (note) (1) hhc: hand held communicator
fke ... 4 4 physical specifications electrical connections: g 1 /2 , 1 /2 -14 npt, pg13.5, or m20 x 1.5 conduit, as specified. and 1-conduit or 2-conduit, as specified. process connections: lp side: 1 /4 -18 npt or rc 1 /4 . hp side: ansi, din, or jis raised face flange. see outline diagram for de- tailed dimensions. refer to ?ode symbols process-wetted parts material: non-wetted parts material: electronics housing: low copper die-cast aluminum alloy finished with epoxy/ polyurethane double coating (standard), or 316 stainless steel (scs14a per jis g5121), as specified. bolts and nuts: cr-mo alloy (standard) or 304 stainless steel fill fluid: silicone oil (standard) or fluori- nated oil mounting flange: 304 stainless steel or carbon steel, as specified environmental protection: iec ip67 and nema 6 / 6p flange mounting: see drawings mass{weight}: transmitter approximately 13kg without options. add; 0.5kg for mounting bracket 0.8kg for indicator option 4.5kg for stainless steel housing option 1.0kg per 50mm extension of diaphragm v j c d e h m t b l u p r process cover 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) hastelloy-c monel lining tantalum 316 stainless (* 1 ) 316 stainless (* 1 ) diaphragm 316l stainless 316l stainless 316l stainless 316l stainless 316l stainless hastelloy-c monel tantalum hastelloy-c monel tantalum 316l stainless 316l stainless material code (7th digit in ?ode symbols? lp side wetted sensor body 316 stainless 316 stainless 316 stainless 316 stainless 316 stainless hastelloy-c lining monel lining tantalum lining hastelloy-c lining monel lining tantalum lining 316 stainless 316 stainless hp side diaphragm & flange face 316l stainless 316l stainless steel +au coating hastelloy-c monel tantalum hastelloy-c monel tantalum hastelloy-c monel hastelloy-c tantalum zirconium mounting position effect: zero shift, less than 0.3kpa{3m bar} for a 10 tilt in any plane. (no extension) no effect on span. this error can be corrected by adjusting zero. dielectric strength: 500v ac, 50/60hz 1 min., between cir- cuit and earth. insulation resistance: more than 100m ? at 500v dc. turn-on time: 4 sec internal resistance for external field indicator: 12 ? or less 0.1 x url span () 0.1 + 0.1 % of span 0.1 x url span () 0.05 + 0.05 % of span performance specifications reference conditions, silicone oil fill, 316ss isolating diaphragms, 4-20 ma analog output in linear mode. accuracy rating: (including linearity, hysteresis, and re- peatability) (standard) for spans greater than 1 /10 of url: 0.2% of span for spans below 1 /10 of url: (option) (code: 21th digit h, k) for span greater than 1 /10 of url: 0.1% of span for span below 1 /10 of url: stability: 0.2% of upper range limit (url) for 3 years. temperature effect: effects per 28 c change between the lim- its of ?40 c and + 85 c (standard) zero shift: 0.35% of url total effect: 0.5% of url (option) (code: 21th digit j, k) zero shift: 0.3% of url total effect: 0.4% of url static pressure effect: zero shift: 0.2% of url / 1mpa span shift: ?0.2% of calibrated span / 1mpa overrange effect: zero shift; 0.1% of url for flange rat- ing pressure supply voltage effect: less than 0.005% of calibrated span per 1v rfi effect: less than 0.2% of url for the frequen- cies of 20 to 1000mhz and field strength 30 v/m when electronics covers on. (classification: 2-abc: 0.2% span per sama pmc 33.1) update period: 120 msec * ) step response: (without electrical damping) * ) faster response is available as option (maximum update rate : 25 times per second) time constant *) 0.55 s 0.3 s range code ? ??and ? dead time *) 0.2 s programmable output linearization function: output signal can be characterized with ?4 points linear approximation function from hhc (1) . emc conformity: en61326 note: (* 1 ) scs14a per jis g 5121 (equivalent cf8m per astm a351/a351m) remark: sensor o-rings: viton o-ring and teflon gasket select- able.
5 optional features indicator: a plug-in analog indicator (2.5% accuracy) can be housed in the electronics compart- ment or in the terminal box of the hous- ing. an optional 5-digit lcd meter with engi- neering unit is also available. local adjustment unit with lcd display: an optional 5-digit lcd meter with zero/ span adjustment function, loop-check function and damping adjustment func- tion, is available. arrester: a built-in arrester protects the electron- ics from lightning surges. lightning surge immunity: 4kv (1.2 50 s) oxygen service: special cleaning procedures are followed throughout the process to maintain all process wetted parts oil-free. the fill fluid is fluorinated oil. chlorine service: oil-free procedures as above. includes fluorinated oil for fill. degreasing: process-wetted parts are cleaned, but the fill fluid is standard silicone oil. not for use on oxygen or chlorine measurement. vacuum service: special silicone oil and filling procedure are applied. see fig.1 and fig.2 optional tag plate: an extra stainless steel tag with customer tag data is wired to the transmitter. coating of cell: cell? surface is finished with epoxy/poly- urethane double coating. specify if environment is extremely cor- rosive. fig . 1 relation between process temperature and operating pressure fig . 2 relation between process temperature and operating pressure silicone (code y,g) silicone (code s) operating area silicone (code t) 101 {1010} 53.3 {533} 13.3 {133} 2.7 {27} [kpa abs] {mbar abs} operating pressure ?0 ?5 60 85 120 200 230 250 300 process temperature[ c ] operating area non-operating area 101 {1010} 0.13 {1.3} [kpa abs] {mbar abs} operating pressure ?5 150 process temperature[ c ] sealing liquid:silicone (code k) accessories oval flanges: (model ffp, refer to data sheet no. eds6-10) converts process connection to 1 /2 -14 npt or to rc 1 /2 ; in carbon steel or in 316 stainless steel. hand held communicator: (model fxw, refer to data sheet no. eds 8-47) z/s board: parts no.=zzpfcx4-a070 when z/s board is mounted on the fcx a 2 amplifier unit, external adjustment screw will be available for zero and span adjustment.
fke ... 4 6 the product conforms to the requirements of the electromagnetic compatibility directive 94/9/ec as detailed within the technical construction file number tn513035. the applicable standards used to demonstrate compliance are : frequency range mhz limits reference standard 30 to 230 40db ( v/m) quasi peak, measured at 10m distance 230 to 1000 47db ( v/m) quasi peak, measured at 10m distance cispr16-1 and cispr16-2 phenomenon test value basic standard performance criteria b electrostatic discharge conducted rf 0.15 to 80mhz 3v 80%am (1khz) electromagnetic field 4kv (contact) 8kv (air) 80 to 1000mhz 10v/m 80%am (1khz) en61000-4-2 burst a en61000-4-3 rated power frequency magnetic field 30a/m 50hz a en61000-4-8 2kv 5khz b en61000-4-4 surge 1.2 s/50 s 1kv (line to line) 2kv (line to ground) b en61000-4-5 a en61000-4-6 emi (emission) en61326 : 1997 class a (standard for industrial location) emi (immunity) en61326: 1997 annex a (standard for industrial location) note) definition of performance criteria a: during testing, normal performance within the specification limits. b: during testing, temporary degradation, or loss of function or performance which is self-recovering. ordering information when ordering this instrument, specify: 1. code symbols 2. measuring range 3. output orientation (burnout direction) when abnormality is occurred in the transmitter. hold / overscale (21.6ma) / underscale (3.2ma). unless otherwise specified, output hold function is sup- plied. 4. indication method (indicated value and unit) in case of the actual scale (code d, h, p, s on 9th digit). 5. tag no. (up to 26 alphanumerical characters), if required.
7 a b c d e s t v w x hp side lp side 0 1 2 3 4 5 6 7 8 9 m r a b c d e f g h j k s t u v w x 3 5 6 v c d e j h m t b l u p r diaphragm 316l stainless steel 316l stainless steel 316l stainless steel 316l stainless steel 316l stainless steel hastelloy-c monel tantalum hastelloy-c monel tantalum 316l stainless steel 316l stainless steel diaphragm and flange face 316l stainless steel hastelloy-c monel tantalum diaphram: 316l stainless steel +au coating flange face: 316 stainless steel hastelloy-c monel tantalum hastelloy-c monel tantalum titanium zirconium wetted sensor body 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel hastelloy-c lining monel lining tantalum lining hastelloy-c lining monel lining tantalum lining 316 stainless steel 316 stainless steel process connection rc 1 /4 1 /4 -18npt 1 /4 -18npt 1 /4 -18npt 1 /4 -18npt rc1/4 1 /4 -18npt 1 /4 -18npt 1 /4 -18npt 1 /4 -18npt material size and rating 304 stainless jis 10k 80a steel jis 10k 100a jis 30k 80a jis 30k 100a ansi/jpi 150lb 3" ansi/jpi 150lb 4" ansi/jpi 300lb 3" ansi/jpi 300lb 4" din pn40 dn80 din pn16 dn100 jis 20k 80a ansi/jpi 600lb 3b carbon steel jis 10k 80a jis 10k 100a jis 30k 80a jis 30k 100a ansi/jpi 150lb 3" ansi/jpi 150lb 4" ansi/jpi 300lb 3" ansi/jpi 300lb 4" din pn40 dn80 din pn16 dn100 316 stainless jis 10k 80a steel ansi/jpi 150lb 3b ansi/jpi 150lb 4b ansi/jpi 300lb 3b ansi/jpi 300lb 4b ansi/jpi 600lb 3b 0.32 32 {3.2 320} 1.3 130 {13 1300} 5 500 {50 5000} process cover 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel hastelloy-c lining monel lining tantalum lining 316 stainless steel 316 stainless steel oval flange screw 7 /16 -20unf 7 /16 -20unf m10 m10 7 /16 -20unf 7 /16 -20unf 7 /16 -20unf m10 m10 7 /16 -20unf conduit connection g 1 /2 ( 1) 1 /2 -14npt ( 1) pg13.5 ( 1) m20 1.5 ( 1) pg13.5 ( 1) g 1 /2 ( 2) 1 /2 -14npt ( 2) pg13.5 ( 2) m20 1.5 ( 2) pg13.5 ( 2) description note 1 note 3 note 2, 3 digit 4 5 6 7 4567 123 f4 ke 89 10 11 12 13 14 15 21 digit no. of code note note 1: (*1) 100: 1 turn down is possible, but should be used at a span greater than 1 /40 of the maximum span for better performance. note 2: (*2) material code r; 6th digit code "6" is not available. note 3: (*3) 5th digit code "0, 2, 4, 6, 8, a, c, e, g, j" are available. combination with 12th digit code "c, e, p, q " are not available. code symbols
fke ... 4 8 none (for ordinary locations) tiis, flameproof (conduit seal) (available for 4th digit code "a", "s") tiis, flameproof (cable gland seal) (available for 4th digit code "a", "s") fm, flameproof (or explosionproof) (available for 4th digit code "b", "t") csa, flameproof (or explosionproof) (available for 4th digit code "b", "t") atex, flameproof iecex scheme/saa, flameproof (approval pending) tiis, intrinsic safety fm, intrinsic safety and nonincendive csa, intrinsic safety and nonincendive atex, intrinsic safety atex, type n iecex scheme/saa, intrinsic safety fm, combined of flameproof and intrinsic safety extension [mm] applicable material code 0 any 50 100 150 200 50 100 150 200 extra ss tag plate stainless steel elec. housing coating of cell none none none yes none none none yes none yes (* 4) yes none none none yes yes none yes none yes yes yes yes yes treatment fill fluid standard silicone oil standard fluorinated oil degreasing silicone oil oxygen service fluorinated oil (7th digit code "v", "j" only) chlorine service fluorinated oil (7th digit code "h", "t", "b", "u", "c" and "e") high temp. 250 c high temp. 300 c high temp. and vacuum (250 c) high temp. and vacuum (300 c) high temp. and high vacuum silicone oil o-ring /gasket teflon membrane viton (o-ring) none teflon (gasket) none viton (o-ring) yes teflon (gasket) yes description note note 4 note 5 digit 10 11 12 13 14 4567 123 f4 ke 89 10 11 12 13 14 15 21 digit no. of code a b c d e x r g h j k p t v y b c e m n p q y a b c d e f g h y w g a d h j s t k a b c d (7th digit code "h" ,"b" ,"c" only) (7th digit code "v" only) 7th digit code "v" 7th digit code "v", "c", "h", "b" (* 5) note 4: (*4) customer tag number can be engraved on standard stainless steel name plate. if extra tag plate is required, select "yes" note 5: (*5) treatment; none (5th digit code "0", "2", "4", "6", "8", "a", "c", "e", "g", "j", "m", "r", "s", "t", "v", "x" and 11th digit code "y" are available. 13th digit code "h, j, s, t, k" are not available.) indicator arrester none none analog, 0 to 100% linear scale none analog, custom scale none none yes analog, 0 to 100% linear scale yes analog, custom scale yes digital, 0 to 100% none digital, custom scale none digital, 0 to 100% yes digital, custom scale yes digital, 0 to 100% (local adjustment unit with lcd display) none digital, custom scale (local adjustment unit with lcd display) none digital, 0 to 100% (local adjustment unit with lcd display) yes digital, custom scale (local adjustment unit with lcd display) yes 9 a b d e f h l p q s 1 2 4 5 z/s board attached.
9 (* 6) cr-mo alloy hexagon socket head cap screw/carbon steel nut cr-mo alloy hexagon bolt/nut 304 stainless steel bolt /304 stainless steel nut (* 7) high accuracy type instruction manual attached low temperature effect type instruction manual attached h+j instruction manual attached instruction manual unattached high accuracy type instruction manual unattached low temperature effect type instruction manual unattached t+u instruction manual unattached description note note 6 note 7 digit 15 21 4567 123 f4 ke 89 10 11 12 13 14 15 21 digit no. of code a b e note 6: (*6) in case of tropical use, select stainless bolts and nuts. note 7: (*7) if other option is not necessary, 21st digit code is blank. in case of 21st digit code is blank, instruction manual attached. h j k l t u v
fke ... 4 10 outline diagram (unit:mm) table 1 note 1) cable gland is supplied in case of flamproof packing type. ?1 cable is suitable. note 2) the pressure connector is located on the down side surface of the detector, when the vent/drainplug is attatched on the upper side of the detector (when the 21th digit of the code symbols: c, e or d). 0, a, s 1, b 3, d 4, e, t 6, g, v 5, f, u 7, h, w ? 150 195 175 152.5 168 190.5 200 ? 126 151 151 126 126 151 151 ? 100 103 103 100 100 103 103 ? 73 96 96 73 73 96 96 t 38 38 52 44 49 44 52 p 116 141 141 116 116 141 141 n-? 8-19 8-19 8-25 4-20 8-23 8-20 8-23 flange 5th digit of the code symbols jis 10k 100a 2, c 170 126 100 73 48 116 8-23 jis 10k 80a jis 30k 80a jis 30k 100a ansi 300lb 3b ansi 150lb 3b ansi 150lb 4b ansi 300lb 4b ? 185 210 240 191 210 r, x 168 126 100 73 52 116 8-23 ansi 600lb 3b 210 229 254 8, j 160 126 100 73 44 116 8-18 din pn40 dn80 200 9, k 180 151 103 96 40 141 8-18 din pn16 dn100 220 210 m 160 126 100 73 42 116 8-23 jis 20k 80a 200 y 50 100 150 200 9.5 ~ 13 10 ~ 17 10.5 ~ 17.5 11 ~ 18 11.5 ~ 18.5 0 a e b f c g d h 160 327 23 333 296 154 290 11th digit code mass approx. l (mm) (kg) 1 kmn j g1/2 17 8 rc1/4 7/16-20unf screw depth15 a, s 1/2-14npt 18 5 1/4-18npt 7/16-20unf screw depth15 b, t pg13.5 84 .5 1/4-18npt m10 screw depth15 c, v 16 5 1/4-18npt m10 screw depth15 d, w pg13.5 84 .5 1/4-18npt 7/16-20unf screw depth15 e, x 4th digit of the code symbols conduit conn. press.conn. oval flage screw m20 1.5 ck ck connection diagram detail "b" detail "c" detail "a" (conduit conn.) (l.p conn.) see table 1 see table 1 k m n ?5 j ?8.5 ? 82.5 ?3 g1/2 17 h.p. conn. "c" conduit conn. n holes h dia inner of gasket oval flang screw see table 1 flange : ansi/jpi -150lb-3b "a" l.p. conn. cable gland (option) vent / drain plug zero adj.screw with field ind. "b" conduit conn. vent / drain plug (when the vent /drain plug attatched on the upper side of the detector) fastener (flameproof only) ? ? ? ? ?0 l t 20 43.5 ? 48 43 41.3 143 27 ?0 52.5 94.5 88 (27) 105 105 8 10 59 in case of 4th digit code "t" in case of 4th digit code "a.b.c.d.e" in case of 4th digit code "s.v.w.x" up down earth terminal sensor unit electronics unit note 2) note 1) 2 1 3 < 7digit code : without "b", "l" and "u" >
11 conduit conn. kmn oval flage screw g1/2 17 8 7/16-20unf screw depth10 a, s 1/2-14npt 16 5 7/16-20unf screw depth10 b, t pg13.5 8 4.5 m10 screw depth10 c, v m20 1.5 16 5 m10 screw depth10 d, w pg13.5 8 4.5 7/16-20unf screw depth10 e, x 4th digit of the code symbols y 50 100 150 200 11.5 ~ 15 12 ~ 19 12.5 ~ 19.5 13 ~ 20 13.5 ~ 20.5 0 a e b f c g d h 150 317 323 286 144 290 11th degit code mass apprpx. l (mm) (kg) table 1 0, a, s 2, c 1, b 3, d 4, e, t 6, g, v r, x ? 150 175 170 195 152.5 168 168 ? 126 126 151 151 126 126 126 ? 100 100 103 103 100 100 100 ? 73 73 96 96 73 73 73 t 38 48 38 52 44 49 52 p 116 116 141 141 116 116 116 n-? 8-19 8-23 8-19 8-25 4-20 8-23 8-23 flange 5th digit of the code symbols m 160 126 100 73 42 116 8-23 jis 10k 80a jis 20k 80a jis 30k 80a jis 10k 100a ansi 150lb 3b jis 30k 100a ansi 300lb 3b ansi 600lb 3b ? 185 210 210 240 191 210 210 5, f, u 190.5 151 103 96 44 141 8-20 ansi 150lb 4b 229 7, h, w 200 151 103 96 52 141 8-23 ansi 300lb 4b 254 8, j 160 126 100 73 44 116 8-18 din pn40 dn80 200 9, k 180 151 103 96 40 141 8-18 din pn16 dn100 220 200 note) cable gland is supplied in case of flameproof packing type. ?1 cable is suitable. 123 ?3 k m n ?5 g1/2 17 2 +0.2 +0.1 ?6 ?2 0 -0.1 1 ? ?6 1/4-18npt 10 see table 1 connection diagram ck ck detail "a" (l.p. conn.) 4th digit code "s" detail "c" (conduit conn.) detail "d" detail "b" (l.p conn.) h.p. conn. "d" conduit conn. cable gland (option) n holes h dia inner of gasket flange : ansi/jpi -150lb-3b zero adj.screw with field ind. "a" or "b" l.p. conn. "c" conduit conn. vent / drain plug oval flange screw see table 1 fastener (flameproof only) earth terminal ? ? ? ? 20 lt ? 40.5 ?0 52.5 88 (27) 41.3 107 105 8 94.5 91 43 186 46.4 ?0 in case of 4th digit code "t" up 105 10 in case of 4th digit code "s.v.w.x" down in case of 4th digit code "a.b.c.d.e" note) sensor unit electronics unit 3 2 1 < 7th digit code : "b", "l" or "u" >
fke ... 4 information in this catalog is subject to change without notice. printed in japan head office gate city ohsaki, east tower, 11-2, osaki 1-chome, shinagawa-ku, tokyo 141-0032, japan http://www.fesys.co.jp/eng instrumentation div. international sales dept. no.1, fuji-machi, hino-city, tokyo, 191-8502 japan phone: 81-42-585-6201, 6202 fax: 81-42-585-6187 http://www.fic-net.jp/eng caution on safety *before using this product, be sure to read its instruction manual in advance.

▲Up To Search▲

Price & Availability of EDSX7-60J

	To Download EDSX7-60J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .