for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 1 the HMC722LC3C is an and/nand/or/nor fun- ction designed to support data transmission rates of up to 13 gbps, and clock frequencies as high as 13 ghz. the hmc772lc3c may be easily con- fgured to provide any of the following logic functions: and, nand, or and nor. the HMC722LC3C also features an output level control pin, vr, which allows for loss compensation or for signal level optimization. all input signals to the HMC722LC3C are terminated with 50 ohms to ground on-chip, and may be either ac or dc coupled. the differential outputs of the HMC722LC3C may be either ac or dc coupled. outputs can be connected directly to a 50 ohm to ground terminated system, while dc blocking capacitors may be used if the terminating system is 50 ohms to a non- ground dc voltage. the HMC722LC3C operates from a single -3.3v dc supply, and is available in a ceramic rohs compliant 3x3 mm smt package. general description HMC722LC3C features functional diagram supports high data rates: up to 13 gbps differential & singe-ended operation fast rise and fall times: 19 / 18 ps low power consumption: 230 mw typ. programmable differential output voltage swing: 600 - 1100 mv propagation delay: 95 ps single supply: -3.3v 16 lead ceramic 3x3mm smt package: 9mm 2 typical applications the HMC722LC3C is ideal for: ? rf ate applications ? broadband test & measurement ? serial data transmission up to 13 gbps ? digital logic systems up to 13 ghz ? nrz-to-rz conversion electrical specifcations, t a = +25 c, vee = -3.3v parameter conditions min. typ. max units power supply voltage -3.6 -3.3 -3.0 v power supply current 70 ma maximum data rate 13 gbps maximum clock rate 13 ghz input high voltage -0.5 0.5 v input low voltage -1.0 0.0 v input return loss frequency <13 ghz 10 db output amplitude single-ended, peak-to-peak 550 mvp-p differential, peak-to-peak 1100 mvp-p output high voltage -10 mv 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage v03.1209
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 2 electrical specifcations, (continued) HMC722LC3C v03.1209 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage parameter conditions min. typ. max units output low voltage -570 mv output rise / fall time differential, 20% - 80% 19 / 18 ps output return loss frequency <13 ghz 10 db small signal gain 27 db random jitter jr rms 0.2 ps rms deterministic jitter, jd peak-to-peak, 2 15 -1 prbs input [1] 2 ps, p-p propagation delay, td 95 ps [1] deterministic jitter calculated by simultaneously measuring the jitter of a 300 mv, 13 ghz, 2 15 -1 prbs input, and a single-ended output [1] vr = 0.0v [2] frequency = 13 ghz [3] frequency = 10 ghz dc current vs. supply voltage [1] [2] output differential vs. supply voltage [1] [3] output differential vs. vr [2] 55 60 65 70 75 80 85 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9 +25c +85c -40c dc current (ma) supply voltage (v) 400 500 600 700 800 900 1000 1100 1200 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 +25c +85c -40c vr (v) differential voltage (mv) 800 850 900 950 1000 1050 1100 1150 1200 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9 +25c +85c -40c differential voltage (mv) supply voltage (v) output differential vs. frequency [3] 600 700 800 900 1000 1100 1200 1300 2 4 6 8 10 12 14 16 output differential (mv) input frequency (ghz)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 3 HMC722LC3C v03.1209 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage [1] vr = 0.0v [2] frequency = 13 ghz [3] frequency = 10 ghz input return loss vs. frequency output return loss vs. frequency -35 -30 -25 -20 -15 -10 0 2 4 6 8 10 12 14 return loss (db) frequency (ghz) -50 -40 -30 -20 -10 0 0 2 4 6 8 10 12 14 return loss (db) frequency (ghz) rise / fall time vs. vr [3] 15 17 19 21 23 25 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 tr tf rise/fall time (ps) vr (v) rise / fall time vs. supply voltage [3] 15 17 19 21 23 25 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 -2.9 tr tf rise/fall time (ps) supply voltage (v)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 4 HMC722LC3C v03.1209 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage eye diagram timing diagram truth table input outputs a b d l l l l h l h l l h h h notes: a = ap - an b = bp - bn d = dp - dn h - positive voltage level l - negative voltage level [1] test conditions: pattern generated with an agilent n4903a serial bert. eye diagram presented on a tektronix csa 8000. device input = 10 gbps pn code, vin = 300mvp-p differential.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 5 absolute maximum ratings electrostatic sensitive device observe handling precautions outline drawing power supply voltage (vee) -3.75v to +0.5v input signals -2v to +0.5v output signals -1.5v to +1v storage temperature -65c to +150c operating temperature -40c to +85c HMC722LC3C v03.1209 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage notes: 1. package body material: alumina 2. lead and ground paddle plating: 30-80 microinches gold over 50 microinches minimum nickel. 3. dimensions are in inches [millimeters]. 4. lead spacing tolerance is non-cumulative. 5. package warp shall not exceed 0.05mm datum -c- 6. all ground leads must be soldered to pcb rf ground. 7. ground paddle must be soldered to vee.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 6 HMC722LC3C v03.1209 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage pin descriptions pin number function description interface schematic 1, 4, 5, 8, 9, 12 gnd signal grounds 2, 3 an, ap clock / data input a 6, 7 bn, bp clock / data input b 10, 11 dp, dn clock / data output 13, 16 gnd supply ground 14 vr output level control. output level may be adjusted by either applying a voltage to vr per output differential vs. vr plot. 15, package base vee negative supply
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 7 evaluation pcb HMC722LC3C v03.1209 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage list of materials for evaluation pcb 118777 [1] item description j1 - j6 pcb mount sma rf connectors j7 - j9 dc pin c1, c2 100 pf capacitor, 0402 pkg. c3, c4 4.7 f capacitor, tantalum r1 10 ohm resistor, 0603 pkg. u1 HMC722LC3C high speed logic, and / nand / or / nor pcb [2] 118775 evaluation board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 item description j1 an j2 ap j3 bn j4 bp j5 dp j6 dn j7 vee j8 vr j9 gnd the circuit board used in the application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package gro- und leads should be connected directly to the ground plane similar to that shown. the exposed package base should be connected to vee. a suffi - cient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com high speed logic - smt 3 3 - 8 HMC722LC3C v03.1209 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage application circuit
|
