3 c0 0.1 f LM78L05 three-terminal positive voltage regulator absolute maximum ratings (operating temperat ure range applies unless otherwise specified) parameter symbol value unit input voltage v l 30 v operating junction temperature range t opr 0~+125 storage temperature range t stg -55~+150 electrical characteristics at specified virtual junction temperature (vi=10v,io=40ma,ci=0.33uf,co=0.1u f, unless otherwise specified ) parameter symbol test conditions min typ max unit 25 4.8 5.0 5.2 v 7v vi 20v, io=1ma~40ma 4.75 5.0 5.25 v output voltage vo io=1ma~70ma 0-125 4.75 5.0 5.25 v io=1ma~100ma 25 15 60 mv load regulation vo io=1ma~40ma 25 8 30 mv 7v vi l 20v 32 150 mv line regulation vo 8v vi 20v 25 26 100 mv quiescent current iq 25 3.8 6 ma iq 8v vi 20v 0-125 1.5 ma quiescent current change iq 1ma v l 40ma 0-125 0.1 ma output noise voltage v n 10hz f 100khz 25 42 uv ripple rejection rr 8v vi 20v,f=120hz 0-125 41 49 db dropout voltage vd 25 1.7 v typical application vi 2 1 vo utc ci 0.33 f note: bypass capacitors are recommended for optimum stability a nd transient response and should be located as close as possible to the regulators. LM78L05 1 date:2011/05 www.htsemi.com semiconductor jinyu 1. out 2. in 3. gnd 1 3 2 sot-89 sot-23-3l maximum output current i o: 0.1 a output voltage v o : 5 v continuous total dissipation p d : sot-23-3l 0.35 w (t a = 25 ) sot-89 0.5 w (t a = 25 )
typical characteristics 2 date:2011/05 www.htsemi.com semiconductor jinyu LM78L05
|