published date : mar 13,2008 drawing no : sdsa 2368 v3 checked : shin chi p.1/4 part number: AUR14A2-A 13.8mm (0.54?) 14 segment dual digit alphanumeric display www.sunled.com features 0.54 inch character height. low current operation. high contrast and light output. easy mounting on p.c. boards or sockets. categorized for luminous intensity. mechanically rugged. standard: gray face, white segment. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. absolute maximum ratings (t a =25c ) ur (gaasp/gap) unit reverse voltage per segment or (dp) v r 5 v forward current per segment or (dp) i f 30 ma forward current (peak) per segment or (dp) 1/10 duty cycle 0.1ms pulse width i fs 160 ma power dissipation per segment or (dp) p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3~5 seconds ur (gaasp/gap) unit forward voltage (typ.) per segment or (dp) (i f =10ma) v f 1.9 v forward voltage (max.) per segment or (dp) (i f =10ma) v f 2.5 v reverse current (max.) per segment or (dp) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 627 nm wavelength of dominant emission (typ.) (i f =10ma) d 625 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 45 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf operating characteristics (t a =25c ) part number emitting color emitting material luminous intensity (if=10ma) ucd wavelength nm p description min. typ. AUR14A2-A red gaasp/gap 1200 4690 627 common anode. rt. hand decimal
published date : mar 13,2008 drawing no : sdsa 2368 v3 checked : shin chi p.2/4 part number: AUR14A2-A 13.8mm (0.54?) 14 segment dual digit alphanumeric display www.sunled.com ? ur
published date : mar 13,2008 drawing no : sdsa 2368 v3 checked : shin chi p.3/4 part number: AUR14A2-A 13.8mm (0.54?) 14 segment dual digit alphanumeric display www.sunled.com AUR14A2-A remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : mar 13,2008 drawing no : sdsa 2368 v3 checked : shin chi p.4/4 part number: AUR14A2-A 13.8mm (0.54?) 14 segment dual digit alphanumeric display www.sunled.com packing & label specifications AUR14A2-A
|