BL2-005 thru bl2-10 page: 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http://www.frontierusa.com 2a bridge rectifier BL2-005 thru bl2-10 features z plastic material used carries underwriters laboratory flammability classification 94v-0 z typical ir less than 1 a z ideal for printed circuit board z high temperature soldering guaranteed: 260 c /10s (9.5mm) lead length / 5lbs., (2.3kg) tension z surge overload rating: 50a peak mechanical data z case: void free plastic package, dimension in inches and (millimeters) z terminals: axial leads, solderable per mil-std-202 method 208 z mounting position: any z weight: 3.6 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or induc tive load. for capacitive load, derate current by 20% ratings symbol BL2-005 bl2-01 bl2-02 bl2-04 bl2-06 bl2-08 bl2-10 units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified output current at 40 c ta i o 2.0 a peak forward surge current, 8.3ms single half sine-wave superimposed on rated load i fsm 50 a storage temperature range t stg - 55 to + 150 c operating temperature range t op - 55 to + 125 c electrical characteristics (a t t a =25 c unless otherwise noted) characteristics symbol BL2-005 bl2-01 bl2-02 bl2-04 bl2-06 bl2-08 bl2-10 units maximum forward voltage drop per bridge element at 1.0a peak v f 1.0 v maximum reverse current at rated dc blocking voltage per element i r 10 a 0.260(6.6) 0.240(6.1) 0.125 (3.2) 0.035(0.9) 0.028(0.7) 0.787 (20.0) min 0.528(13.4) 0.488(12.4) 0.566(14.4) 0.528(13.4) 0.710(18.0) 0.670(17.0) 0.160(4.1) 0.140(3.6) ac
BL2-005 thru bl2-10 page: 2 ratings and characteristic curves BL2-005 thru bl2-10 fig. 3 - typical forward characteristics 10 1.0 0.1 01 instantaneous reverse current, microamperes percent of rated peak reverse voltage t j = 25 ) 2.0 1.0 0 resistive or inductive load capacitive loads 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 instantaneous forward voltage, volts 20 10 1.0 0.1 .01 instantaneous forward current amperes fig. 2 - derating curve for output rectified current t j =2 5 single sine -wave (jedec method)
|