spec no: dsaf2656 rev no: v.1 date: apr/20/2005 page: 1 of 5 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1101005970 package dimension s notes: 1. all dimensions are in millimeters (inches) . 2. tolerance is 0 .25(0.01") unless otherwise noted . 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice . t- 1 3/4 (5mm) bi - color indicator lamp preliminary spe c description the hyper red source color devices are made with dh ingaalp on gaas substrate light emitting diode. the super bright green source color devices are made with gallium phosphide green light emitting diode. WP59SURKSGC hyper red super bright green features uniform light output. low power consumption. 3 leads with one common lead. i.c. compatible. long life - solid state reliability. rohs compliant.
spec no: dsaf2656 rev no: v.1 date: apr/20/2005 page: 2 of 5 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1101005970 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 WP59SURKSGC hyper red (ingaalp) 480 1100 24 super bright green (gap) 70 200 water clear symbol parameter device typ. max. test conditions units peak peak wavelength hyper red super bright green 650 565 nm i f =20ma d dominant wavelength hyper red super bright green 635 568 nm i f =20ma ? 1/2 spectral line half - width hyper red super bright green 28 30 nm i f =20ma c capacitance hyper red super bright green 35 15 pf v f =0v;f=1mhz v f forward voltage hyper red super bright green 1.95 2.2 2.5 2.5 v i f =20ma i r reverse current all 10 ua v r = 5v parameter hyper red super bright green units power dissipation 170 105 mw dc forward current 30 25 ma peak forward current [1] 185 140 ma reverse voltage 5 v operating/storage temperature - 40c to +85c lead solder temperature [2] 260c for 3 seconds 5 lead solder temperature [3] 260c for 5 seconds notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3 . 5mm below package base.
spec no: dsaf2656 rev no: v.1 date: apr/20/2005 page: 3 of 5 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1101005970 WP59SURKSGC hyper red
spec no: dsaf2656 rev no: v.1 date: apr/20/2005 page: 4 of 5 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1101005970 super bright green
spec no: dsaf2656 rev no: v.1 date: apr/20/2005 page: 5 of 5 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1101005970 packing & label specifications WP59SURKSGC remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
