View BD6226FM_4791552.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/15 www.rohm.com 2010.07 - rev.d ? 2010 rohm co., ltd. all rights reserved. h-bridge drivers for brush motors 18v max. h-bridge drivers bd622 series overview these h-bridge drivers are full bridge drivers for brush motor ap plications. each ic can operate at a wide range of power supply voltages (from 3v to 36v), supporting output currents of up to 2a. mos transistors in the output stage allow for pwm signal control, while the integrated vref voltage control function of previous models of fers direct replacement of deprecated motor driver ics. these highly efficient h-bridge driver ics facilitate low-power consumption design. features 1) built-in, selectable one channel or two channels configuration 2) low standby current 3) supports pwm control signal input (20khz to 100khz) 4) vref voltage setting pin enables pwm duty control 5) cross-conduction prevention circuit 6) four protection circuits provided: ocp, ovp, tsd and uvlo applications vcr; cd/dvd players; audio-visual equipm ent; optical disc drives; pc peripherals; car audios; car navigation systems; oa equipments line up matrix rating voltage channels maximum output current 0.5a 1.0a 2.0a 7v 1ch bd6210 hfp / f bd6211 hfp / f bd6212 hfp / fp 2ch bd6215 fp bd6216 fp / fm bd6217 fm 18v 1ch bd6220 hfp / f bd6221 hfp / f bd6222 hfp / fp 2ch bd6225 fp bd6226 fp / fm 36v 1ch bd6230 hfp / f bd6231 hfp / f bd6232 hfp / fp 2ch bd6235 fp bd6236 fp / fm bd6237 fm *packages; f:sop8, hfp:hrp7, fp:hsop25, fm:hsop-m28 no.10007edt02
technical note 2/15 bd622 ? ? ?
technical note 3/15 bd622 ?
technical note 4/15 bd622
technical note 5/15 bd622
technical note 6/15 bd622
technical note 7/15 bd622
technical note 8/15 bd622
technical note 9/15 bd622
technical note 10/15 bd622
technical note 11/15 bd622
technical note 12/15 bd622 ?
technical note 13/15 bd622
technical note 14/15 bd622 ? order quantity needs to be multiple of the minimum quantity. embossed carrier tape tape quantity direction of feed the direction is the 1pin of product is at the upper left when you hold reel on the left hand and you pull out the tape on the right hand 2500pcs e2 () direction of feed reel 1pin (unit : mm) sop8 0.90.15 0.3min 4 + 6 ? 4 0.17 +0.1 - 0.05 0.595 6 43 8 2 5 1 7 5.00.2 6.20.3 4.40.2 (max 5.35 include burr) 1.27 0.11 0.420.1 1.50.1 s 0.1 s (unit : mm) hsop25 7.8 0.3 5.4 0.2 2.75 0.1 1.95 0.1 25 14 1 13 0.11 1.9 0.1 0.36 0.1 12.0 0.2 0.3min. 0.25 0.1 13.6 0.2 0.8 (max 13.95 include burr) s 0.1 s ? order quantity needs to be multiple of the minimum quantity. embossed carrier tape tape quantity direction of feed the direction is the 1pin of product is at the upper left when you hold reel on the left hand and you pull out the tape on the right hand 2000pcs e2 () direction of feed reel 1pin
technical note 15/15 bd622 ? order quantity needs to be multiple of the minimum quantity. embossed carrier tape tape quantity direction of feed the direction is the 1pin of product is at the upper left when you hold reel on the left hand and you pull out the tape on the right hand 1500pcs e2 () direction of feed reel 1pin (unit : mm) hsop-m28 (max 18.85 include burr) 0.8 7.5 0.2 15 5.15 0.1 0.11 1.25 2.2 0.1 1 18.5 0.2 0.5 0.2 0.37 0.1 9.9 0.3 4 +6 ?4 28 1.2 0.15 14 0.27 +0.1 ?0.05 s 0.1 s direction of feed 1pin reel ? order quantity needs to be multiple of the minimum quantity. embossed carrier tape tape quantity direction of feed the direction is the 1pin of product is at the upper right when you hold reel on the left hand and you pull out the tape on the right hand 2000pcs tr ( ) (unit : mm) hrp7 s 0.08 0.730.1 1.27 0.8875 1.9050.1 0.8350.2 1.5230.15 10.540.13 0.080.05 (max 9.745 include burr) 9.3950.125 s 1.0170.2 8.00.13 0.27 +0.1 - 0.05 4.5 + 5.5 ? 4.5 8.820.1 (6.5) 765432 1 (7.49)
r1010 a www.rohm.com ? 2010 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specied herein is subject to change for improvement without notice. the content specied herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. great care was taken in ensuring the accuracy of the information specied in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specied herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specied in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, ofce-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specied in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, re or any other damage caused in the event of the failure of any product, such as derating, redunda ncy, re control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospac e machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specied herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.

▲Up To Search▲

Price & Availability of BD6226FM

	To Download BD6226FM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .