VS912SL no. a1506-1/4 specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, av equipment, communication device, office equipment, industrial equipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. applications ? hdmi. ? usb 2.0. ? mobile communication. ? ethernet. ? lcd, camera. ? notebooks and desktop computers, peripherals. features ? very low capacitance 0.4pf typ. ? esd / transient protection of high-speed data lines in applications according to: iec61000-4-2 (esd): 20kv (air) 20kv (contact), iec61000-4-4 (eft): 50a (5/50ns). ? halogen free compliance. speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit esd discharge *1 v esd contact 20 kv peak pulse current *2 ipp tp=8/20 s3a operating temperature range top --40 to +125 c storage temperature tstg --55 to +150 c note : * 1 v esd according to iec61000-4-2 * 2 ipp according to iec61000-4-5 marking : z1 ordering number : ena1506 o2809rv tk im tc-00002059 sanyo semiconductors data sheet VS912SL low capacitance tvs diode array protection device of high-speed data lines www.semiconductor-sanyo.com/network
VS912SL no. a1506-2/4 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max reverse working voltage v rwm 5.3 v breakdown voltage v (br) i (br) =1ma, (i/o to gnd) 6 v reverse current i r v r =5.3v, (i/o to gnd) 50 na clamping voltage v cl ipp=1a, tp=8/20 s, (i/o to gnd) *3 10 13 v ipp=3a, tp=8/20 s, (i/o to gnd) *3 12 15 v forward clamping voltage v fc ipp=1a, tp=8/20 s, (gnd to i/o) *3 2 4 v ipp=3a, tp=8/20 s, (gnd to i/o) *3 4 6 v line capacitance c t v r =0v, f=1mhz, (i/o to gnd) 0.4 0.6 pf v r =0v, f=1mhz, (i/o to i/o) 0.2 0.3 pf note : * 3 ipp according to iec61000-4-5 package dimensions electrical connection unit : mm (typ) 7065-001 12 3 45 98 76 1 : i/o1 2 : i/o2 3 : gnd 4 : i/o3 5 : i/o4 6 : nc 7 : nc 8 : nc 9 : nc top view 2.3 0.2 0.35 0.94 1.0 0.308 0.05 max 0.59 0.5 98 76 98 76 12345 12 4 35 0.4 0.31 pin 1 marking area 1 : i/o1 2 : i/o2 3 : gnd 4 : i/o3 5 : i/o4 6 : nc 7 : nc 8 : nc 9 : nc sanyo:tslp-9-1
VS912SL no. a1506-3/4 application example 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 VS912SL VS912SL VS912SL vs909sl +5v hdmi type a connector hdmi source/sink tmds data2 tmds data1 tmds data0 tmds clock cec scl sda hot plug detect tsdm channels cec line ddc(i 2 c bus) ddc/cec gnd +5v hot plug detect n.c. it14836 clamping voltage peak pulse current, ipp -- a clamping voltage, v cl -- v forward clamping voltage peak pulse current, ipp -- a clamping voltage, v fc -- v 0 234 1 7 8 9 10 11 12 13 14 tp=8/20 s i/o to gnd it14735 024 35 1 0 1 2 3 4 5 6 tp=8/20 s gnd to i/o it14736 line capacitance reverse voltage, v r -- v line capacitance, c t -- pf reverse current temperature, t -- c reverse current, i r -- a 035 14 2 0 0.1 0.2 0.3 0.4 0.5 0.6 f=1mhz i/o to gnd it14738 10 -11 10 -10 7 5 3 2 2 10 -9 7 5 3 2 25 50 75 100 125 150 it14737 v r =5.3v i/o to gnd 10 -8 7 5 3 2 10 -7 7 5 3 2 10 -6 7 5 3
VS912SL no. a1506-4/4 sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. ps this catalog provides information as of october, 2009. speci cations and information herein are subject to change without notice. line capacitance frequency, f -- mhz line capacitance, c t -- pf line capacitance temperature, t -- c line capacitance, c t -- pf 0 1500 2000 3000 500 2500 1000 0 0.1 0.2 0.3 0.4 0.5 0.6 i/o to gnd it14739 v r =5.3v v r =0v --50 25 100 --25 50 75 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 it14740 v r =5.3v v r =0v f=1mhz v r =0v
|
