? faraday technology. as part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice fara017d page 1 of 2 sep - 05 (b) signals are attenuated whenever they are transmitted through coaxial cable. the main problem is attenuation which is directly related to the frequency and length and type of cable used. amplitude responses which started out flat can be distorted to a point outside specification. faraday passive cable equalisers will correct for the distortion producing a nominally flat amplitude response with minimum additional insertion loss. they are manufactured in rugged die - cast boxes with choice of convenie nt connector. a typical application is to correct for cabling in a cross site link. the fe1118 specified is designed for 70 mhz i.f. links with lmr 200 cable. order code fe1118 operating frequency 50 mhz to 90 mhz insertion loss @ 90 mhz < 2 db los s @ 50 mhz wrt 90 mhz 4.8 db linearity 0.1 db pk - pk from straight line input/output impedance 75 ohms input connector bnc (f) output connector n - type (m) return loss (50 mhz ? 90 mhz) 20 db min aqueous washable no package dr00135a a custom design service is available for other cable types, frequency ranges and connector configurations. please contact faraday with your particular cable or package requirements. passive cable equaliser fe1118
package detail faraday technology ltd. tel: + 44 (0)1782 661501 croft road industri al estate, fax: + 44 (0)1782 630101 newcastle, staffordshire email: sales@faradaytech.co.uk st5 0qz. england. web site: http://www.faradaytech.co.uk fara017d page 2 of 2 sep - 05 (b)
|
